| Age | Commit message (Collapse) | Author |
|---|
|
This allows a single file to declare and activate this data source.
This could come from:
* cloud-config-url on kernel cmdline
* /etc/cloud/cloud.cfg.d
* debian preseed of 'cloud-init/local-cloud-config'
Also here is
* some tests
* a small fix to parse_cmdline_data found when writing those tests.
LP: #1115833
|
|
ifquery will exit failure if there is no /run/network directory.
normally that would get created by one of network-interface.conf
or networking.conf. But, it is possible that we're running
before either of those have.
|
|
|
|
The write_files documentation incorrectly used 'perms' rather than
'permissions'.
LP: #1111205
|
|
This change adds the ability to provide specific package versions to
Distro.install_packages and subsequently Distro.package_command. In order
to effectively use Distro.install_packages, one is now able to pass a
variety of formats in order to easily manage package requirements.
These are examples of what can be passed:
- "package"
- ["package1","package2"]
- ("package",)
- ("package", "version")
- [("package1",)("package2",)]
- [("package1", "version1"),("package2","version2")]
This change also adds the option to install a specific version for the
puppet configuration module. This is especially important here as
successful puppet deployments are highly reliant on specific puppet
versions.
|
|
Right now, all distros but ubuntu will fail to manage /etc/hosts.
This is due to the fact that the templates are named:
- hosts.ubuntu.tmpl
- hosts.redhat.tmpl
The config handler is specifically looking for a template with the
given distro name.
This change addresses this issue.
|
|
|
|
previously, there was an attempt in the config drive source to limit
the source device to a "full block device" rather than a partition.
This was done by a simplistic approach of checking that the last
character of the name was not a number. That was filtering out
CD-rom devices (sr0).
Now, we have a bit more sophisticated approach to that same problem.
We filter out block devices that have a 'partition' entry in
/sys/class/block/DEVICE_NAME/partition .
LP: #1100545
|
|
Previously cloud-config to get a '/dev/sr0' entry written to /etc/fstab
would have had to have the full /dev/sr0. This change allows cloud-config
to reference it without the '/dev/' prefix. Like:
| mounts:
| - [ sr0, /media/sr0 ]
|
|
Changes in revision 753 broke cloud-init on ubuntu, as it has a different
dhclient directory than Fedora where the change was developed and tested.
This change does 2 things:
* searches multiple directories (including /var/lib/dhcp) for the lease
files.
* adds a fallback to the old code path of choosing the default route
as the virtual router if there were no virtual routers found in the
lease files.
LP: #1089989
|
|
This simiplifies the logic, by just making it independent of 'system'.
LP: #1096423
|
|
We were trying to avoid the user's password being written to the log, but that
was looking for the wrong option.
LP: #1096417
|
|
|
|
After parsing and merging datasource's config, the changes in were not making
it into the datasource's 'distro.
The end result was that the when a config module was called, it's 'cloud'
argument would be updated in 'cloud.distro', but not in
'cloud.datasource.distro'. This path was required for getting mirror settings
to take affect, because they include information from the datasource.
Ie:
cc_apt_configure had
mirror_info = cloud.datasource.get_package_mirror_info()
the datasource then used *its* copy of sys_cfg to call
self.distro.get_package_mirror_info
and *that* distro's sys_cfg had not been updated.
LP: #1090482
|
|
This adds 'omnibus' to the values supported for chef's "omnibus_url" config
option. It also:
* makes 'omnibus_url' configurable in cloud-config.
* adds a 'force_install' flag, to allow the install code to
act even if /usr/bin/chef-client is already present.
|
|
Instead of always installing puppet give users the ability to opt-out.
LP: #1090205
|
|
Thanks to Anatoliy Dobrosynets
|
|
--stderr would be preferred for readability, but older versions of
logger do not support the long form. Use the short form for compatibility.
LP: #1083715
|
|
|
|
when /etc/ca-certificates.conf is read by update-ca-certificates
lines after a blank line get ignored. Here, ensure that
there are no blank lines, and no duplicate entries for cloud-init are
added.
LP: #1077020
|
|
resize_root: noblock
has been broken in the 0.7.0 series. Using it would disable resizing.
LP: #1080985
|
|
LP: #1080717
|
|
|
|
|
|
this adds 'power-state-change' config module that allows the user to
specify in cloud-config syntax that a system reboot or shutdown should occur
after cloud-init is done.
|
|
It seems like its possible that boto 2.5.2 and below have the lazy loading
metadata dictionary so as a precaution we will always take the hit of
unlazying the metadata dictionary by traversing it which in the non-lazy
dictionary case has no effect (its marginal). This also removes the need
to check the boto version and the dependency on setup tools just for this
case.
|
|
|
|
|
|
|
|
|
|
Previously file modification of system configuration was done
in a functional and hard to test manner. Now instead this patch
allows for a manner that provides a nice object oriented
interface to those objects as well as makes it possible to test
those parsing entities without having to invoke distro class code.
- Created parsers for:
- /etc/sysconfig
- /etc/hostname
- resolv.conf
- /etc/hosts
Moved duplicated functionality into the root level distro class including:
- apply_hostname
- set_hostname
- *various shared configuration file names/paths*
|
|
|
|
|
|
|
|
This allows the user to easily run stuff even after cloud-init-final
has finished. The initial reason for it is to be able to run
/sbin/poweroff and not have cloud-init complain loudly that it is
being killed.
LP: #1064665
|
|
LP: #1078097
|
|
Add in entry for LP: 1068801 and LP: 1075756
as well as LP: 1077245 and add in reason why
we are switching back to using 'None' as the
initial datasource value.
|
|
|
|
This does a couple things:
* separates out the 'normalize_public_keys' from the DataSource's get_public_ssh_keys
* uses that from config-drive datasource
* supports config drive v1 or v2 public-keys
* adds a test.
LP: #1077700
|
|
newer versions of boto lazily load the metadata from the ec2
metadata service. Here, we:
1. Add a ec2_utils module that checks which version of boto is being used and
under the right versions the metadata dictionary will be expanded.
2. Use this new ec2_utils module in the cloudstack and ec2
datasources as there entrypoints into boto.
3. Add a dependency on python-pkg-resources (from pkg_resources import
parse_version) to determine the boto version.
LP: #1068801
|
|
|
|
Add in a configuration module that can write out the yum.repo format for
those that want to hook into different repos for installing.
|
|
LP: #1076811
|
|
1. Remove the usage of the path.join function now that all code should
be going through the util file methods (and they can be mocked out as
needed).
2. Adjust all occurences of the above join function to either not use it
or replace it with the standard os.path.join (which can also be mocked
out as needed)
3. Fix pylint from complaining about the tests folder 'helpers.py' not
being found.
4. Add a pylintrc file that is used instead of the options hidden in the
'run_pylint' tool.
|
|
|
|
|
|
Fix the case where a unknown type is seen and it has contents which are in
unicode. That caused python to blow-up when this happens since
'string-escape' doesn't work on unicode (at least in 2.6).
LP: #1075756
|
|
LP: #1073077
|
|
LP: #1065116
|
|
LP: #1070345
|
