| Age | Commit message (Collapse) | Author |
|---|
|
LP: #1872836
|
|
Swap file size variable was being used before checked if it's set to str
"auto". If set to "auto", it will break with:
failed to setup swap: unsupported operand type(s) for /: 'str' and 'int'
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
RHBZ: 1772505
|
|
The cc_mounts module does not support NFS mounts in the form of hostname:/ or hostname:/path.
This PR adds support for NFS-style paths in the fs_spec field.
LP: #1870370
|
|
|
|
When creating a swap file on an xfs filesystem, fallocate cannot be used.
Doing so results in failure of swapon and a message like:
swapon: swapfile has holes
The solution here is to maintain a list (currently containing only XFS)
of filesystems where fallocate cannot be used. The, on those fileystems
use the slower but functional 'dd' method.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Co-authored-by: Adam Dobrawy <naczelnik@jawnosc.tk>
Co-authored-by: Scott Moser <smoser@brickies.net>
Co-authored-by: Daniel Watkins <daniel@daniel-watkins.co.uk>
LP: #1781781
|
|
Commit 6797e822959b84c98cf73e02b2a6e3d6ab3fd4fe replaced
the LOG.warn calls that linters were warning about; this
also replaces calls that linters would not have recognised
(as `log` is generally a parameter in these scenarios).
LP: #1508442
|
|
Under some circumstances, cc_disk_setup may reformat volumes which
already appear in /etc/fstab (e.g. Azure ephemeral drive is reformatted
from NTFS to ext4 after service-heal). Normally, cc_mounts only calls
mount -a if it altered /etc/fstab. With this change cc_mounts will read
/proc/mounts and verify if configured mounts are already mounted and if
not raise flag to request a mount -a. This handles the case where no
changes to fstab occur but a mount -a is required due to change in
underlying device which prevented the .mount unit from running until
after disk was reformatted.
LP: #1825596
|
|
A newer version of pyflakes (2.0.0) was released.
It identifed some unused variables that version 1.6.0 did not identify.
The change here merely fixes those unused variables.
|
|
Do not add new entries to /etc/fstab for devices that already have an
existing fstab entry.
Resolves: rhbz#1542578
|
|
|
|
This also makes some of the messages more consistent.
|
|
This will change all instances of LOG.warn to LOG.warning as warn
is now a deprecated method. It will also make sure any logging
uses lazy logging by passing string format arguments as function
parameters.
|
|
This has been a recurring ask and we had initially just made the change to
the cloud-init 2.0 codebase. As the current thinking is we'll just
continue to enhance the current codebase, its desirable to relicense to
match what we'd intended as part of the 2.0 plan here.
- put a brief description of license in LICENSE file
- put full license versions in LICENSE-GPLv3 and LICENSE-Apache2.0
- simplify the per-file header to reference LICENSE
- tox: ignore H102 (Apache License Header check)
Add license header to files that ship.
Reformat headers, make sure everything has vi: at end of file.
Non-shipping files do not need the copyright header,
but at the moment tests/ have it.
|
|
'nobootwait' is an upstart specific extension to the mount syntax that is
not supported by other mount systems. As Ubuntu 16.04 moved from upstart
to systemd, support for 'nobootwait' was lost.
All examples using 'nobootwait' are updated to use the standard 'nofail',
which gives the expected behaviour of not failing to boot in case a volume
is missing. There are subtle differences in semantics between
'nobootwait' and 'nofail', but it is the best substitute that gives
behaviour similar to the upstart specific option.
|
|
During recent changes to cc_mounts, on systemd systems, we started using
systemctl daemon-reload
rather than 'mount -a' to get mounts done.
The belief was that since entries in /etc/fstab would be written
to tell systemd that they should be after cloud-init
(x-systemd.requires=cloud-init.service) that the reload would then
let systemd mount the units as expected.
That doesn't seem to work, and new mount entries end up not getting
mounted. The change here moves back to using 'mount -a', but
then also does a systemctl daemon-reload.
LP: #1647708
|
|
This adds a call to 'activate_datasource'. That will be called
during init stage (or init-local in the event of a 'local' dsmode).
It is present so that the datasource can do platform specific operations
that may be necessary. It is passed the fully rendered cloud-config
and whether or not the instance is a new instance.
The Azure datasource uses this to address formatting of the ephemeral
devices. It does so by
a.) waiting for the device to come online
b.) removing the marker files for the disk_setup and mounts modules
if it finds that the ephemeral device has been reset.
LP: #1611074
|
|
This adds lots of config module documentation in a standard format.
It will greatly improve the content at readthedocs.
Additionally:
* Add a 'doc' env to tox.ini
* Changed default highlight language for sphinx conf from python to yaml
most examples in documentation are yaml configs
* Updated datasource examples to highlight sh code properly
|
|
The end result of all of these changes is to get mounts managed by
cloud-init to occur only after cloud-init.service is done. We need to do
that so that filesystems that are set up by cloud-init (in disk_setup)
do not get mounted by stale entries in /etc/fstab before
the setup occurs.
This can occur in 2 ways:
a.) new instance with old /etc/fstab
b.) same instance where disk needs adjusting (Azure resize will re-format
the ephemeral disk).
The list of changes here is:
- move mounts and disk_setup module to cloud-init.service rather
than config. cloud-init.service runs earlier in boot so it
can get those mount points done earlier.
- on systemd add 'x-systemd.requires=cloud-init.service' to fstab options
- cloud-init-local.service: add Before=basic.target
- cloud-init.service:
- extend After, Before, and Wants to multiple lines rather than one
long line.
- sort consistently with cloud-init-local.service
- add DefaultDependencies=no
- add Before=default.target
- add Conflicts=shutdown.target
LP: #1611074
|
|
|
|
|
|
specific option. This change was dropped in 15.10 (LP: #1514485).
|
|
fallocate is much faster than 'dd' for creating and initializing a
swap file.
LP: #1482994
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This just removes comments '# pylint:' things and other code
remnents of pylint.
|
|
The expected behavior was that 'ephemeral0' in a mount device entry
and ephemeral0 mapped to /dev/xvdb that /dev/xvdb1 or /dev/xvdb would
be substituted.
Explicitly setting 'ephemeral0.0' would mean only xvdb in this case.
LP: #1236594
|
|
|
|
|
|
|
|
|
|
|
|
makes it cloud agnostic.
|
|
Modified cc_mounts to identify whether ephermalX is partitioned.
Changed datasources for Azure and SmartOS to use 'ephemeralX.Y' format.
Added disk remove functionally
|
|
|
|
|
|
|
|
1. Remove the usage of the path.join function
now that all code should be going through
the util file methods (and they can be
mocked out as needed).
2. Adjust all occurences of the above join
function to either not use it or replace
it with the standard os.path.join (which
can also be mocked out as needed)
3. Fix pylint from complaining about the
tests folder 'helpers.py' not being found
4. Add a pylintrc file that is used instead
of the options hidden in the 'run_pylint'
tool.
|
|
LP: #1046946
|
