| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This has been a recurring ask and we had initially just made the change to
the cloud-init 2.0 codebase. As the current thinking is we'll just
continue to enhance the current codebase, its desirable to relicense to
match what we'd intended as part of the 2.0 plan here.
- put a brief description of license in LICENSE file
- put full license versions in LICENSE-GPLv3 and LICENSE-Apache2.0
- simplify the per-file header to reference LICENSE
- tox: ignore H102 (Apache License Header check)
Add license header to files that ship.
Reformat headers, make sure everything has vi: at end of file.
Non-shipping files do not need the copyright header,
but at the moment tests/ have it.
|
|
'nobootwait' is an upstart specific extension to the mount syntax that is
not supported by other mount systems. As Ubuntu 16.04 moved from upstart
to systemd, support for 'nobootwait' was lost.
All examples using 'nobootwait' are updated to use the standard 'nofail',
which gives the expected behaviour of not failing to boot in case a volume
is missing. There are subtle differences in semantics between
'nobootwait' and 'nofail', but it is the best substitute that gives
behaviour similar to the upstart specific option.
|
|
During recent changes to cc_mounts, on systemd systems, we started using
systemctl daemon-reload
rather than 'mount -a' to get mounts done.
The belief was that since entries in /etc/fstab would be written
to tell systemd that they should be after cloud-init
(x-systemd.requires=cloud-init.service) that the reload would then
let systemd mount the units as expected.
That doesn't seem to work, and new mount entries end up not getting
mounted. The change here moves back to using 'mount -a', but
then also does a systemctl daemon-reload.
LP: #1647708
|
|
Several various minor fixes for the readthedocs documentation.
|
|
A user has pointed out that upon set up of a machine, users typically
remove repos (sometimes all of them) and then add repos in. This does
make sense for a typical user.
|
|
The version of sfdisk in wily (and onwards) only accepts sectors as a
valid disk size. As such, this refactors the MBR code path in
cc_disk_setup to use sectors.
- use --unit=S: while newer versions of sfdisk assume --unit=S, older
versions do not so we specifically pass it in. Versions of sfdisk
found in supported OSes such as centos6 wont assume --unit=S.
- add --force: this exists back to centos 6 (2.17.2), so it should
be fine, and is what we ultimately want.
"do what I say, even if it is stupid"
- keep --Linux. Even though this has been deprecated for quite some
time, we keep it until versions that want it are unsupported.
If necessary at some point we could check for util linux version
and if it had --Linux and use it in those cases.
Additionally, improve usefulness of some log messages.
LP: #1460715
|
|
This adds a call to 'activate_datasource'. That will be called
during init stage (or init-local in the event of a 'local' dsmode).
It is present so that the datasource can do platform specific operations
that may be necessary. It is passed the fully rendered cloud-config
and whether or not the instance is a new instance.
The Azure datasource uses this to address formatting of the ephemeral
devices. It does so by
a.) waiting for the device to come online
b.) removing the marker files for the disk_setup and mounts modules
if it finds that the ephemeral device has been reset.
LP: #1611074
|
|
pycodestyle 2.1.0 is in Ubuntu zesty, and complained about the
changes made here. Simple style changes. This makes 'make pep8'
pass again when built in a zesty build system with proposed enabled.
|
|
Simple typo fixes.
|
|
Previous commit f0747c4b4cf073273e11d383f0354257be7276ed relocated
normalize_users_groups to ug_util module, but missed modifying
the cc_users_groups config module. Apply the location change to fix.
|
|
The function exec_mkpart_gpt was simply not waiting for udev events
to flush after calling sgdisk. The corresponding function
exec_mkpart_mbr already did.
This should fix a transient failure where mkfs would fail with
'not a block device'.
LP: #1626243
|
|
Update the summary of rsyslog module and add logging.rst to docs.
|
|
Ubuntu Core images use the `snap create-user` to add users to an
Ubuntu Core system. Add support for creating snap users by adding
a key to the users dictionary.
users:
- name: bob
snapuser: bob@bobcom.io
Or via the 'snappy' dictionary:
snappy:
email: bob@bobcom.io
Users may also create a snap user without contacting the SSO by
providing a 'system-user' assertion by importing them into snapd.
Additionally, Ubuntu Core systems have a read-only /etc/passwd such that
the normal useradd/groupadd commands do not function without an additional
flag, '--extrausers', which redirects the pwd to /var/lib/extrausers.
Move the system_is_snappy() check from cc_snappy module to util for
re-use and then update the Distro class to append '--extrausers' if
the system is Ubuntu Core.
|
|
The amount of code to do user and group normalization
and extraction deserves its own file so move the code
that does this to a new file and update references to the
old location.
This removes some of the funkyness done in config modules
to avoid namespace and attribute clashes as well.
|
|
This adds lots of config module documentation in a standard format.
It will greatly improve the content at readthedocs.
Additionally:
* Add a 'doc' env to tox.ini
* Changed default highlight language for sphinx conf from python to yaml
most examples in documentation are yaml configs
* Updated datasource examples to highlight sh code properly
|
|
Prior to LXD 2.3, the bridge configuration was done through distro
packaging. Thus, lxd module interacted with debconf.
With 2.3 and higher, this is now done inside LXD itself, so we
need to use "lxc network" there.
For now, this perfectly matches what we had before with debconf and
doesn't cover any of the new options. We can always add those later.
A set of tests similar to what we had for debconf has been added to make
sure things look good.
This is tested in Yakkety container running LXD 2.3 and all options seem
to be passed through as expected, giving me the bridge I defined.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
|
|
If device has no partition table, the first line of output from `sgdisk
-p <device>` will be "Creating new GPT entries.", instead of something
like "Disk /dev/sdb: 266338304 sectors, 127.0 GiB".
Also, protect against localized output by adjusting subp calls that
parse sgdisk output to set LANG=C.
|
|
The end result of all of these changes is to get mounts managed by
cloud-init to occur only after cloud-init.service is done. We need to do
that so that filesystems that are set up by cloud-init (in disk_setup)
do not get mounted by stale entries in /etc/fstab before
the setup occurs.
This can occur in 2 ways:
a.) new instance with old /etc/fstab
b.) same instance where disk needs adjusting (Azure resize will re-format
the ephemeral disk).
The list of changes here is:
- move mounts and disk_setup module to cloud-init.service rather
than config. cloud-init.service runs earlier in boot so it
can get those mount points done earlier.
- on systemd add 'x-systemd.requires=cloud-init.service' to fstab options
- cloud-init-local.service: add Before=basic.target
- cloud-init.service:
- extend After, Before, and Wants to multiple lines rather than one
long line.
- sort consistently with cloud-init-local.service
- add DefaultDependencies=no
- add Before=default.target
- add Conflicts=shutdown.target
LP: #1611074
|
|
Old behavior allowed a user to provide:
apt_mirror: ""
And that was the same as:
apt_mirror: null
and the same as having not specified apt_mirror at all. This maintains
that behavior for all old string values.
LP: #1621180
|
|
This should be fqdn, not fdqn.
LP: #1607810
|
|
Assuming that the installed package creates the directory
/etc/salt/pki/minion (ubuntu yakkety does), this will pick that
directory for the pki_dir default.
If it does not exist, then it will maintain the old directory.
LP: #1609899
|
|
This allows both v1/2 and and v3 formats to exist in config.
If both are present, then prefer v3. If values are not the same
then a ValueError is raised.
LP: #1616831
|
|
Spacewalk is used by some peopel to manage connections into redhat package
management systems and kickstart and various other tasks, so having a
system be able to do the needed tasks on first boot to integrate with that
system would be very useful (to some).
See: https://fedorahosted.org/spacewalk/
|
|
This adds an improved apt configuration format that is fully backwards
compatible with previous behavior. This is mostly copied from curtin's
implementation.
It does:
* clean up and centralizes many of the top level 'apt_*' values that
previously existed into a single top level 'apt'key.
* support a 'source' in apt/sources/entry that has only a key
* documents new features and adds tests.
See the added doc/examples/cloud-config-apt.txt for more information.
|
|
The older versions have various issues with unicode
and those versions seem to be pulled into epel so
we should denote that those versions are bad and
shouldn't be used by updating to a newer version that
does work.
|
|
Some of these really won't work to well on non-supporting
distros so to avoid further user pain tag this with the
supported distros where they should work.
|
|
Add support for installing and configuring ntp service, exposing the
minimum config of servers or pools to be added. If none are defined
then fallback on generating a list of pools by distro hosted at
pool.ntp.org (which matches what's found in the default ntp.conf
shipped in the respective distro).
|
|
Things here:
- restart rather than 'start' the service, to pick up a config change
that we would have written.
- update the config and write cert files whether or not the file
existed on the system. Previously it would only write the cert
files if /etc/mcollective/server.cfg already existed.
- improve test coverage
|
|
|
|
* StringIO from six doesn't act as 'binary stream' in Python 3.
This patch changes StringIO to BytesIO to have code compatible with
Python 3 and Python 2.
* Add try/except for IOError in case when server.cfg doesn't exists. This is
necessary for unit tests or cases when server.cfg is not included to package
* Add UnitTest for cc_mcollective.py
LP: #1597699
|
|
if no permissions were given in a write_files stanza, then
a warning would be emitted.
The fix here is just to special case handling of None.
|
|
pylint --errors-only found several errors. Some of the changes
here represent real errors, others just code that pylint did
not like.
|
|
a.) remove 'gpg_' from function names in new gpg module.
b.) use --recv-keys rather than --recv
--recv-keys is more obvious and works back to precise at least.
c.) do not trim trailing '\n' from a armour'd key.
|
|
This helps for cleaner code structuring.
ALong that makeing sure all these functions have a gpg_prefix.
|
|
|
|
The functions clearly are apt specific so the name should reflect that.
|
|
|
|
|
|
This branch accomplishes several things:
- centrally handle 'dsmode' to be 'local' or 'net.
This allows local data sources to run before networking
but still have user-data read by default when networking is available.
- support networking information being read on dreamcompute
dreamcompute's openstack declares networking via the
/etc/network/interfaces style 'network_config' format.
- support reading and applying networking information on SmartOS
- improve reading networking from openstack network_data.json (LP: #1577982)
add support for mtu and routes and many miscellaneous fixes.
- support for renaming devices in a container (LP: #1579130).
Also rename network devices as instructed by the host on
every boot where cloud-init networking is enabled. This is required
because a.) containers do not get systemd.link files applied
as they do not have udev. b.) if the initramfs is out of date
then we need to apply them.
- remove blocking of udev rules (LP: #1577844, LP: #1571761)
LP: #1577982, #1579130, #1577844, #1571761
|
|
|
|
|
|
|
|
This was broken for keys already existing in the local keyring.
There instead of the keycontent it reported the header like:
pub 1024R/03683F77 2009-10-27
uid Launchpad PPA for Scott Moser
|
|
|
|
|
|
|
|
|
|
|
|
|
