| Age | Commit message (Collapse) | Author |
|---|
|
openEuler Homepage: https://www.openeuler.org/en/
|
|
https://www.cloudlinux.com/
|
|
Using flake8 inplace of pyflakes
Renamed run-pyflakes -> run-flake8
Changed target name to flake8 in Makefile
With pyflakes we can't suppress warnings/errors in few required places.
flake8 is flexible in that regard. Hence using flake8 seems to be a
better choice here.
flake8 does the job of pep8 anyway.
So, removed pep8 target from Makefile along with tools/run-pep8 script.
Included setup.py in flake8 checks
|
|
|
|
Virtuozzo Linux is a distro based off of CentOS 8, similar to Alma Linux and Rocky Linux.
|
|
In CI run against pylint 2.9.3 and fix occurrences of:
- W0237 (arguments-renamed)
- W0402 (deprecated-module)
The W0402 deprecated-module was about module `imp`:
cloudinit/patcher.py:9: [W0402(deprecated-module), ]
Uses of a deprecated module 'imp'
The imp module is deprecated and replaced by importlib, which according
to the documentation has no replacement for acquire_lock() and
release_lock(), which are the only reason why `imp` is imported.
Nothing about the code using this lock that actually requires it.
Let's remove the locking code and the import altogether.
Dropping the locking makes patcher.patch() an empty wrapper around
_patch_logging(). Rename _patch_logging() to patch_logging() and
call it directly instead. Drop patch().
|
|
Adds a udev script which will invoke a hotplug hook script on all net
add events. The script will write some udev arguments to a systemd FIFO
socket (to ensure we have only instance of cloud-init running at a
time), which is then read by a new service that calls a new 'cloud-init
devel hotplug-hook' command to handle the new event.
This hotplug-hook command will:
- Fetch the pickled datsource
- Verify that the hotplug event is supported/enabled
- Update the metadata for the datasource
- Ensure the hotplugged device exists within the datasource
- Apply the config change on the datasource metadata
- Bring up the new interface (or apply global network configuration)
- Save the updated metadata back to the pickle cache
Also scattered in some unrelated typing where helpful
|
|
Currently _bring_up_interfaces() is a no-op for any distro using
renderers. We need to be able to support bringing up a single
interfaces, a list of interfaces, and all interfaces. This should be
independent of the renderers, as the network config is often
generated independent of the mechanism used to apply it.
Additionally, I included a refactor to remove
"_supported_write_network_config". We had a confusing call chain of
apply_network_config->_write_network_config->_supported_write_network_config.
The last two have been combined.
|
|
Also added a new (currently experimental) systemd-networkd renderer,
and includes a small refactor to cc_resolv_conf.py to support the
resolved.conf used by systemd-resolved.
|
|
Rocky Linux is a RHEL-compatible distribution so all changes that have
been made should be trivial.
|
|
AlmaLinux OS is RHEL-compatible so all the changes needed are trivial.
|
|
the above option allows the user to control the behavior of a distro
hostname selection if both short hostname and FQDN are supplied.
If `prefer_fqdn_over_hostname` is true the FQDN will be selected as
hostname; if false the hostname will be selected
LP: #1921004
|
|
Since version 1.9.1, @includedir can be used in the sudoers files
instead of #includedir:
https://github.com/sudo-project/sudo/releases/tag/SUDO_1_9_1
Actually "@includedir" is the modern syntax, and "#includedir" the historic
syntax. It has been considered that "#includedir" was too puzzling because
it started with a "#" that otherwise denotes comments.
This happens to be the default in SUSE Linux enterprise sudoer package,
so cloudinit should take this into account.
Otherwise, cloudinit was adding an extra #includedir, which was
resulting on the files under /etc/sudoers.d being included twice, one by
@includedir from the SUSE package, one by the @includedir from
cloudinit. The consequence of this, was that if you were defining an
Cmnd_Alias inside any of those files, this was being defined twice and
creating an error when using sudo.
|
|
This commit does the following:
* introduces the `cloudinit.persistence` module, containing
`CloudInitPickleMixin` which provides lightweight versioning of
objects' pickled representations (and associated testing)
* introduces a basic upgrade testing framework (in
`cloudinit.tests.test_upgrade`) which unpickles pickles from previous
versions of cloud-init (stored in `tests/data/old_pickles`) and tests
invariants that the current cloud-init codebase expects
* uses the versioning framework to address an upgrade issue where
`Distro.networking` could get into an unexpected state, and uses the
upgrade testing framework to confirm that the issue is addressed
|
|
Under FreeBSD, we want to use "shutdown -p" for poweroff.
Alpine Linux also has some specificities.
We choose to define a method that returns the shutdown command line to
use, rather than a method that actually does the shutdown. This makes it
easier to have the tests in test_handler_power_state do their
verifications.
Two tests are added for the special behaviours that are known so far.
|
|
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
Changes:
tox: bump the pylint version to 2.6.0 in the default run
Fix pylint 2.6.0 W0707 warnings (raise-missing-from)
|
|
Add new module cc_apk_configure for creating Alpine /etc/apk/repositories file.
Modify cc_ca_certs, cc_ntp, cc_power_state_change, and cc_resolv_conf for Alpine.
Add Alpine template files for Chrony and Busybox NTP support.
Add Alpine template file for /etc/hosts.
|
|
This aligns their docstrings more closely with their actual behaviour.
|
|
For versions before 20.2, we allowed the use of ec2 mirrors if the datasource availability_zone matches one of the ec2 regions. We are now updating that behavior to allow allow the use of ec2 mirrors on ec2 instances or if the user directly passes an an ec2 mirror url through #cloud-config apt directives.
LP: #1456277
|
|
This commit introduces the initial structure for the "cloudinit.net -> cloudinit.distros.networking Hierarchy" refactor, as detailed in [0]. It also updates that section with some changes driven by this initial implementation, as well as adding a lot more specifics to it.
[0] https://cloudinit.readthedocs.io/en/latest/topics/hacking.html#cloudinit-net-cloudinit-distros-networking-hierarchy
|
|
This was painful, but it finishes a TODO from cloudinit/subp.py.
It moves the following from util to subp:
ProcessExecutionError
subp
which
target_path
I moved subp_blob_in_tempfile into cc_chef, which is its only caller.
That saved us from having to deal with it using write_file
and temp_utils from subp (which does not import any cloudinit things now).
It is arguable that 'target_path' could be moved to a 'path_utils' or
something, but in order to use it from subp and also from utils,
we had to get it out of utils.
|
|
This removes the use of variables named ‘l’, ‘O’, or ‘I’. Generally
these are used in list comprehension to read the line of lines.
|
|
As written, it's possible that the first transformation for a mirror
hostname could be passed None if the parsed mirror URL didn't have a
hostname component, when the defined interface is that the
transformations will be passed strings.
This isn't an error currently, because the first transformation happens
to gracefully handle being passed None. It returns None, so the
pipeline processing ends there.
This was caught when testing out mypy on the cloud-init codebase.
|
|
* distros/tests/test_init: drop needless brackets/indentation
* distros: drop leading/trailing hyphens from mirror URL labels
|
|
This modifies _get_package_mirror_info to convert the hostnames of generated mirror URLs to their IDNA form, and then iterate through them replacing any invalid characters (i.e. anything other than letters, digits or a hyphen) with a hyphen.
This commit introduces the following changes in behaviour:
* generated mirror URLs with Unicode characters in their hostnames will have their hostnames converted to their all-ASCII IDNA form
* generated mirror URLs with invalid-for-hostname characters in their hostname will have those characters converted to hyphens
* generated mirror URLs which cannot be parsed by `urllib.parse.urlsplit` will not be considered for use
* other configured patterns will still be considered
* if all configured patterns fail to produce a URL that parses then the fallback mirror URL will be used
LP: #1868232
|
|
|
|
* freebsd: introduce the freebsd renderer
Refactoring of the FreeBSD code base to provide a real network renderer
for FreeBSD.
Use the generic update_sysconfig_file() from rhel_util to handle the
access to /etc/rc.conf.
Interfaces are not automatically renamed by FreeBSD using
the following configuration in /etc/rc.conf:
```
ifconfig_fxp0_name="eth0"
```
* freesd: use regex named groups
Reduce the complexity of `get_interfaces_by_mac_on_freebsd()` with
named groups.
* freebsd: breaks up _write_network() in tree small functions
- `_write_ifconfig_entries()`
- `_write_route_entries()`
- `_write_resolve_conf()`
* extend find_fallback_nic() to support FreeBSD
this uses `route -n show default` to find the default interface
* freebsd: use dns keys from NetworkState class
The NetworkState class (settings instance) exposes the DNS configuration
in two keys:
- `dns_nameservers`
- `dns_searchdomains`
On OpenStack, these keys are set when a global DNS server is set. The
alternative is the `dns_nameservers` and `dns_search` keys from each
subdomain. We continue to read those.
* freebsd: properly target the /etc/resolv.conf file
* freebsd: ignore 'service routing restart' ret code
On FreeBSD 10, the restart of routing and dhclient is likely to fail because
- routing: it cannot remove the loopback route, but it will still set up
the default route as expected.
- dhclient: it cannot stop the dhclient started by the netif service.
In both case, the situation is ok, and we can proceed.
* freebsd: handle case when metadata MAC local locally
Handle the case where the metadata configuration comes with a MAC that
does not exist locally.
See:
- https://github.com/canonical/cloud-init/pull/61/files/635ce14b3153934ba1041be48b7245062f21e960#r359600604
- https://github.com/canonical/cloud-init/pull/61/files/635ce14b3153934ba1041be48b7245062f21e960#r359600966
* freebsd: show up a warning if several subnet found
The FreeBSD provider currently only allow one subnet per interface.
* freebsd: honor the target parameter in _write_network
* freebsd: log when a bad route is found
* freebsd: pass _postcmds to start_services()
* freebsd: updatercconf() is depercated
Replace `updatercconf()` by `rhel_util.update_sysconfig_file()`.
* freebsd: ensure gateway is ipv4 before using it
With the legacy ENI format, an IPv6 gateway may be pushed. This instead
of the expected IPv4.
* freebsd: find_fallback_nic, support FB10
On FreeBSD <= 10, `ifconfig -l` ignores the down interfaces.
* freebsd: use util.target_path() to load resolv.conf
Ensure we access `/etc/resolv.conf`, not `etc/resolv.conf`.
* freebsd: skip subnet without netmask
Those are likely to be either invalid of in IPv6 format. IPv6 support
will be addressed later in a new patchset.
* freebsd: get_devicelist returns netif list
Ensure `get_devicelist()` returns the list of known netif on FreeBSD.
* replace rhel_util.update_sysconfig_file wrapper call, with a wrapper function
* reverse if condition to remove an indent
Co-authored-by: Igor Galić <me+github@igalic.co>
|
|
* cc_ssh: fix capitalisation of SSH
* doc: fix capitalisation of SSH
* cc_keys_to_console: fix capitalisation of SSH
* ssh_util: fix capitalisation of SSH
* DataSourceIBMCloud: fix capitalisation of SSH
* DataSourceAzure: fix capitalisation of SSH
* cs_utils: fix capitalisation of SSH
* distros/__init__: fix capitalisation of SSH
* cc_set_passwords: fix capitalisation of SSH
* cc_ssh_import_id: fix capitalisation of SSH
* cc_users_groups: fix capitalisation of SSH
* cc_ssh_authkey_fingerprints: fix capitalisation of SSH
|
|
From original work by: Andrew Jorgensen <ajorgens@amazon.com>
Reviewed-by: Matt Nierzwicki <nierzwic@amazon.com>
Reviewed-by: Ethan Faust <efaust@amazon.com>
|
|
Allow setting of user passwords on FreeBSD
The www/chpasswd utility which we depended on for FreeBSD installations
does *not* do the same thing as the equally named Linux utility.
For FreeBSD, we now use the pw(8) utility (which can only process one
user at a time)
Additionally, we abstract expire passwd into a function, and override it
in the FreeBSD distro class.
Co-Authored-By: Chad Smith <chad.smith@canonical.com>
|
|
Building the subp arguments for a `useradd` call in a variable named
`adduser_cmd` is extremely confusing; let's not do that.
(This also changes the snap and freebsd variables to something more
apropos.)
|
|
In some cases, the 'passwd' command might not be available, but
'usermod' might be. In debian systems both are provided by the
'passwd' package. In Redhat/Centos passwd comes from 'passwd' package
while 'usermod' comes from `shadow-utils`
This should just support either one with no real cost other than
the check.
|
|
Distro subclasses arch, freebsd and debian still have a path with an
implemented _write_network method which has a return value. Can drop
this pylint ignore when _write_network is dropped from arch, freebsd
and debian.
|
|
Any distro that has a '_write_nework_config' method should no
longer get their _write_network called at all. So lets drop
that code and raise a RuntimeError any time we got there.
Replace the one caller of 'apply_network' (legacy openstack path)
with a call to apply_network_config after converting the ENI to
network config.
|
|
Cloud config can now disable ssh access to non-root users.
When defining the 'users' list in cloud-configuration a boolean
'ssh_redirect_user: true' can be provided to disable ssh logins for
that user. Any ssh 'public-keys' defined in cloud meta-data will be added
and disabled in .ssh/authorized_keys. Any attempts to ssh as this user
using acceptable ssh keys will be presented with a message like the
following:
Please login as the user "ubuntu" rather than the user "youruser".
|
|
Multiple distros use sysconfig format but have different content
and paths to certain files. Update distros to specify these
template paths in their renderer_configs dictionary.
|
|
Linux guests can provide information to Hyper-V hosts via KVP.
KVP allows the guests to provide any string key-value-pairs back to the
host's registry. On linux, kvp communication pools are presented as pool
files in /var/lib/hyperv/.kvp_pool_#.
The following reporting configuration can enable this kvp reporting in
addition to default logging if the pool files exist:
reporting:
logging:
type: log
telemetry:
type: hyperv
|
|
To deny a user elevated access, you can omit the `sudo` key from the
`users` dictionary. This works fine however it's implicitly defined
based on defaults of `cloud-init`. If the project moves to have `sudo`
access allowed for all by default (quite unlikely but still possible)
this will catch a few people out.
This introduces the ability to define an explicit `sudo: False` in the
`users` dictionary and it will prevent `sudo` access. The behaviour is
identical to omitting the key.
LP: #1771468
|
|
Add a base NTP client configuration dictionary and allow Distro
specific changes to be merged. Add a select client function which
implements logic to preferr installed clients over clients which
need to be installed. Also allow distributions to override the
cloud-init defaults.
LP: #1749722
|
|
The instance identity document is a better source for region information,
partly because region isn't actually in meta-data at all, only
availability-zone, which happens to be named similarly.
Reviewed-by: Ethan Faust <efaust@amazon.com>
Reviewed-by: Cyle Riggs <cyler@amazon.com>
Reviewed-by: Tom Kirchner <tjk@amazon.com>
Reviewed-by: Matt Nierzwicki <nierzwic@amazon.com>
[ajorgens@amazon.com: rebase onto 0.7.9]
[ajorgens@amazon.com: changes per merge proposal discussions]
|
|
The 'cloud-init clean' command allows a user or script to clear cloud-init
artifacts from the system so that cloud-init sees the system as
unconfigured upon reboot. Optional parameters can be provided to remove
cloud-init logs and reboot after clean.
The 'cloud-init status' command allows the user or script to check whether
cloud-init has finished all configuration stages and whether errors
occurred. An optional --wait argument will poll on a 0.25 second interval
until cloud-init configuration is complete. The benefit here is scripts
can block on cloud-init completion before performing post-config tasks.
|
|
Modules can optionally define a list of supported distros on which they can run
by declaring a distros attribute in the cc_*py module. This branch fixes
handling of cloudinit.stages.Modules.run_section. The behavior of run_section
is now the following:
- always run a module if the module doesn't declare a distros attribute
- always run a module if the module declares distros = [ALL_DISTROS]
- skip a module if the distribution on which we run isn't in module.distros
- force a run of a skipped module if unverified_modules configuration contains
the module name
LP: #1715738
LP: #1715690
|
|
Currently the cloud-init default locale (en_US.UTF-8) is set by
the base datasource class. This patch allows a distro to overide
the fallback value with one that's available in the distro but continues
to respect an image which has preconfigured a locale.
- Distro object now has a get_locale method which will return a
preconfigure locale setting by checking the distros locale system
configuration file. If not set or not present, return the default
locale of en_US.UTF-8 which retains behavior of all previous cloud-init
releases.
- Apply locale now handles regenerating locales or system configuration
files as needed.
- Adjust apply_locale logic to skip locale-regen if the specified LANG
value is C.UTF-8,C, or POSIX; they do not require regeneration.
- Further add unittests to exercise the default paths for Ubuntu and
non-ubuntu paths to validate they get the LANG expected.
|
|
This gets initial opensuse and SLES support back to a working state.
Still missing is more complete network file writing and unit tests.
|
|
Many changes here to get us able to build rpms on CentOS 5 or 6 and RHEL.
* add 'Requires' as 'BuildRequires' also.
This allows us to run cloud-init tools in the build environment, and
also will allow us to run tests in the build process.
* build for both systemd and upstart (centos 5) init systems.
* Add 'centos' as a variant
Adding the variant means we can use the 'centos' user as default on centos
rather than a 'fedora' or 'rhel'.
* drop argparse from the requirements.
On any system other than python 2.6, having a 'requirements' that mentions
argparse just causes problems. Instead we add that Requires to the spec
directly.
* list dependency on dmidecode (as redhat distro spec had)
* remove duplicate line in files section ({_unitdir}/cloud-*)
* Use rpm macros for init-system chunks and drop use
of init_system variable template
* Add el6 only build-req on python-argparse
* python-cheetah is not required in the build environment as the
the spec is already rendered. (We will soon move the spec to jinja).
|
|
This patch targets to make FreeBSD 10.3 or 11 work on Azure. The
modifications abide by the rule of:
* making as less modification as possible
* delegate to the distro or datasource where possible.
The main modifications are:
1. network configuration improvements, and movement into distro path.
2. Fix setting of password.
Password setting through "pw" can only work through pipe.
3. Add 'root:wheel' to syslog_fix_perms field.
4. Support resizing default file system (ufs)
5. copy cloud.cfg for freebsd to /etc/cloud/cloud.cfg rather than
/usr/local/etc/cloud/cloud.cfg.
6. Azure specific changes:
a. When reading the azure endpoint, search in a different path
and read a different option name (option-245 vs. unknown-245).
so, the lease file path should be generated according to platform.
b. adjust the handling of ephemeral mounts for ufs filesystem and
for finding the ephemeral device.
c. fix mounting of cdrom
LP: #1636345
|
|
This will change all instances of LOG.warn to LOG.warning as warn
is now a deprecated method. It will also make sure any logging
uses lazy logging by passing string format arguments as function
parameters.
|
|
Previously, the distro had hard coded which network renderer it would
use. This adds support for just picking the right renderer based
on what is available.
Now, that can be set via a priority in system_info, but should
generally work. That config looks like:
system_info:
network:
renderers: ["eni", "sysconfig"]
When no renderers are found, a specific RendererNotFoundError is raised.
stages.py is modified to catch that and log it at error level. This
path should not really be exercised, but could occur if for example an
Ubuntu system did not have ifupdown, or a rhel system did not have
sysconfig. In such a system previously we would have quietly rendered
ENI configuration but that would have been ignored. This is one step
better in that we at least log the error.
|
|
This has been a recurring ask and we had initially just made the change to
the cloud-init 2.0 codebase. As the current thinking is we'll just
continue to enhance the current codebase, its desirable to relicense to
match what we'd intended as part of the 2.0 plan here.
- put a brief description of license in LICENSE file
- put full license versions in LICENSE-GPLv3 and LICENSE-Apache2.0
- simplify the per-file header to reference LICENSE
- tox: ignore H102 (Apache License Header check)
Add license header to files that ship.
Reformat headers, make sure everything has vi: at end of file.
Non-shipping files do not need the copyright header,
but at the moment tests/ have it.
|
