| Age | Commit message (Collapse) | Author |
|---|
|
To query the metadata, the Cloudstack source currently scans a predefined
DHCP lease directories to find the IP of the DHCP server. This list does
not include "/var/lib/NetworkManager/" which is the default directory in
CentOS7. Add that directory to the list.
|
|
Previously the IPv4LL address for metadata discovery was assigned to the
first interfaces from an alphabetic sort. On DigitalOcean, the metadata
is only accessible from the first interface. This fixes a problem where the
IPv4LL address is bound to the wrong interface with snapshots.
This is part of general improvements to the DigitalOcean Datasource in
bug 1676908.
|
|
Instead of only configuring 'public' and 'private' interfaces, we want
to configure any that has been defined in the meta-data. For legacy reasons,
the 'public' and 'private' interfaces are maintained as 'eth0' and 'eth1'
respectively.
This is part of bug 1676908 for general DigitalOcean datasource fixups.
|
|
Several references that were using URL shorteners are now broken due to
their service going away, making it painful to even figure out what they
were supposed to be pointing at. Put back long URLS using '# noqa' to
make flake8 happy.
LP: #1669727
|
|
This change makes the DigitalOcean datasource consistent with OpenStack and
Joyent by binding the resolver addresses to the loopback interface. This _is_
a work-around to bug 1675571.
Part of bug 1676908.
|
|
Links presented in network_data.json to the guest running on ESXi
are of type 'dvs'.
LP: #1674946
|
|
While documentation indicates that the smbios product name should
contain 'Google Compute Engine', experimentation and bug reports
indicate that is not always the case. The change here is to change
the check for GCE to also consider a serial number that starts with
'GoogleCompute-'.
Also, ds-identify was not currently searching for GCE if no config of
datasource_list was found. Most images have a datasource_list defined.
So update the list to include GCE.
LP: #1674861
|
|
This is thie cloud-init part of a fix to allow nova-lxd to provide
config drive data. The other part will be done in nova-lxd.
The agreement here is that nova-lxd will copy the contents of the
config drive to /config-drive in the container.
LP: #1673411
|
|
Now tox will run pylint. The .pylintrc file sets pylint to only produce
errors, and will ignore certain classes that are known problematic (six).
|
|
Python 2's json.loads would accept bytes, so this bug was
only exposed in python3.
|
|
When deploying on Azure and using only cloud-init, you must "bounce" the
network interface to trigger a DDNS update. This allows dhclient to
register the hostname with Azure so that DNS works correctly on their
private networks (i.e. between vm and vm).
The agent path was already doing the bounce so this creates parity
between the built-in path and the agent.
LP: #1674685
|
|
This moves the warning code that was added specifically for
EC2 into a generic path at cloudinit/warnings.py.
It also adds support for writing warning files into the
warnings directory to be shown by Z99-cloudinit-warnings.sh.
|
|
Brightbox will identify their platform to the guest by setting the
product serial to a string that ends with 'brightbox.com'.
LP: #1661693
|
|
Based on the setting Datasource/Ec2/strict_id, the datasource
will now warn once per instance.
|
|
This modifies get_data in DataSourceOpenStack.py to get the timeout
and retries values from the data source configuration, rather than
from keyword arguments. This permits get_data to use the same timeout
as other methods, and allows an operator to increase the timeout in
environments where the metadata service takes longer than five seconds
to respond.
LP: #1657130
Resolves: rhbz#1408589
|
|
- staticIPV4 property can be either None or a valid Array. Need to
check for None before accessing the ip address.
- Modified few misc. log messages.
- Added a new log message while waiting for the customization config file.
- Added support to configure the maximum amount of time to wait for the
customization config file.
- VMware Customization Support is provided only for DataSourceOVF class and
not for any other child classes. Implemented a new variable
vmware_customization_supported to check whether the 'VMware Customization'
support is available for a specific datasource or not.
- Changed the function get_vmware_cust_settings to get_max_wait_from_cfg.
- Removed the code that does 'ifdown and iup' in NIC configurator.
|
|
This has been a recurring ask and we had initially just made the change to
the cloud-init 2.0 codebase. As the current thinking is we'll just
continue to enhance the current codebase, its desirable to relicense to
match what we'd intended as part of the 2.0 plan here.
- put a brief description of license in LICENSE file
- put full license versions in LICENSE-GPLv3 and LICENSE-Apache2.0
- simplify the per-file header to reference LICENSE
- tox: ignore H102 (Apache License Header check)
Add license header to files that ship.
Reformat headers, make sure everything has vi: at end of file.
Non-shipping files do not need the copyright header,
but at the moment tests/ have it.
|
|
In some situations, cloud-init will erroneously append a default
domain to an already fully qualified hostname, resulting in something
like 'localhost.localdomain.localdomain'. This patch checks to see if
the value returned by util.get_hostname() contains a '.', and if it
does treats it as a fully qualified name.
Resolves: rhbz#1389048
LP: #1647910
|
|
CloudSigma would not get any datasources loaded during cloud-init local.
Thus, when the network datasource was removed, *no* CloudSigma
datasources would be loaded.
LP: #1648380
|
|
These are just simple syntax fixes to work correctly on python2.6.
Found when testing in a centos 6 container.
|
|
This extends the list of device 'types' that are considered to be physical
to include hyperv, hw_veb, and vhost_user.
LP: #1642679
|
|
Cloud-init has for some time relied on walinuxagent to do some bits
of work necessary for instance initialization. That reliance has
not been needed for a while, but we have still defaulted to it.
This change uses the "builtin" path that Daniel Watkins added
some time ago by default. Also, Adjust tests that assumed the
non-__builtin__ Azure agent_command.
LP: #1538522
|
|
This adds a call to 'activate_datasource'. That will be called
during init stage (or init-local in the event of a 'local' dsmode).
It is present so that the datasource can do platform specific operations
that may be necessary. It is passed the fully rendered cloud-config
and whether or not the instance is a new instance.
The Azure datasource uses this to address formatting of the ephemeral
devices. It does so by
a.) waiting for the device to come online
b.) removing the marker files for the disk_setup and mounts modules
if it finds that the ephemeral device has been reset.
LP: #1611074
|
|
pycodestyle 2.1.0 is in Ubuntu zesty, and complained about the
changes made here. Simple style changes. This makes 'make pep8'
pass again when built in a zesty build system with proposed enabled.
|
|
Simply fix a commit that should not have been pushed.
|
|
Oracle public cloud has the string 'unavailable' in its metadata
service for 'block-device-mapping'. The change here is to return
None in device_name_to_device if that is the case.
|
|
Support AliYun(Ali-Cloud ECS). This datasource inherits from EC2,
the main difference is the meta-server address is changed to
100.100.100.200.
The datasource behaves similarly to EC2 and relies on network polling.
As such, it is not enabled by default.
|
|
Replace the parsing of 'ip' to get a link and mac address list
in OpenNebula's datasource with usage of cloudinit.net.
This makes test cases there not depend on 'ip' availability
and also uses common code.
|
|
This gets the tests running in centos 6.
* ProcessExecutionError: remove setting of .message
Nothing in cloud-init seems to use .message anywhere, so
it does not seem necessary.
The reason to change it is that on 2.6 it spits out:
cloudinit/util.py:286: DeprecationWarning: BaseException.message
* tox.ini: add a centos6 environment
the tox versions listed here replicate a centos6 install with
packages from EPEL.
You will still need a python2.6 to run this env so we do not
enable it by default.
|
|
This just looks in one other maas related path for a config file.
The file '91_kernel_cmdline_url' is written by cloud-init when it
gets a cloud-config-url parameter.
Also now we read the config even if a url is specified to potentially
fill in credentials.
|
|
On DigitalOcean, Network information is provided via Meta-data.
It changes the datasource to be a local datasource, meaning it
will run before fallback networking is configured.
The advantage of that is that before networking is configured it
can bring up a network device with ipv4 link-local and hit the
metadata service that lives at 169.254.169.254 to find its networking
configuration. It then takes down the link local address and lets
cloud-init configure networking.
The configuring of a network device to go looking for a metadata
service is gated by a check of data in the smbios. This guarantees
that the code will not run on another system.
|
|
The end result of all of these changes is to get mounts managed by
cloud-init to occur only after cloud-init.service is done. We need to do
that so that filesystems that are set up by cloud-init (in disk_setup)
do not get mounted by stale entries in /etc/fstab before
the setup occurs.
This can occur in 2 ways:
a.) new instance with old /etc/fstab
b.) same instance where disk needs adjusting (Azure resize will re-format
the ephemeral disk).
The list of changes here is:
- move mounts and disk_setup module to cloud-init.service rather
than config. cloud-init.service runs earlier in boot so it
can get those mount points done earlier.
- on systemd add 'x-systemd.requires=cloud-init.service' to fstab options
- cloud-init-local.service: add Before=basic.target
- cloud-init.service:
- extend After, Before, and Wants to multiple lines rather than one
long line.
- sort consistently with cloud-init-local.service
- add DefaultDependencies=no
- add Before=default.target
- add Conflicts=shutdown.target
LP: #1611074
|
|
Treat null type as yet another physical type, seen in real-world
openstack cloud.
Also, support the case where network_data.json provides mac addresses
in upper case. Rackspace public cloud currently does that.
LP: #1621968
|
|
When user-data was provided in the ovf environment python3 would call
base64.decodestring() with a string rather than bytes and an exception
would occur.
This fixes the broken path and adds unit test. Also changes to
return None rather than empty string when there is no user-data and
when there is user-data return that as bytes instead of string.
LP: #1619394
|
|
Adds an install option for for OpenRC init scripts.
I've also restricted installing tests more correctly.
Also, don't hardcode the path to ip (/bin/ip on gentoo).
|
|
The OpenStack network_data.json does not provide a name for bond links.
This change makes it so a dummy one is generated and used instead
to satisfy cloud-init which does require one.
In order to write the correct link (underlying 'link' names)
for the bonds, we maintain a list of info by ids so we can easily
get the right device name.
Also:
* add a vlan test case that similarly references an id rather than name.
* make bond interfaces auto
LP: #1605749
|
|
This adds some function to the generator to maintain the presense of a
flag file '/run/cloud-init/enabled' indicating that cloud-init is enabled.
Then, only run the dhclient hooks if on Azure and cloud-init is enabled.
The test for is_azure currently only checks to see that the board vendor
is Microsoft, not actually that we are on azure. Running should not be
harmful anywhere, other than slowing down dhclient.
The value of this additional code is that then dhclient having run
does not task the system with the load of cloud-init.
Additionally, some changes to config are done here.
* rename 'dhclient_leases' to 'dhclient_lease_file'
* move that to the datasource config (datasource/Azure/dhclient_lease_file)
Also, it removes the config in config/cloud.cfg that set agent_command
to __builtin__. This means that by default cloud-init still needs
the agent installed. The suggested follow-on improvement is to
use __builtin__ if there is no walinux-agent installed.
|
|
It is more efficient and cross-distribution safe to use the hooks function
from dhclient to obtain the Azure endpoint server (DHCP option 245).
This is done by providing shell scritps that are called by the hooks
infrastructure of both dhclient and NetworkManager. The hooks then
invoke 'cloud-init dhclient-hook' that maintains json data
with the dhclient options in
/run/cloud-init/dhclient.hooks/<interface>.json .
The azure helper then pulls the value from
/run/cloud-init/dhclient.hooks/<interface>.json file(s). If that file does
not exist or the value is not present, it will then fall back to the
original method of scraping the dhcp client lease file.
|
|
Per [1], DigitalOcean provides the metadata in multiple formats. The JSON
document is the preferred endpoint.
Changes:
- Switch to the v1.json meta-data endpoint
- Identify droplet identity from SMBIOS
- Only poll for metadata when the instance is confirmed to be a droplet
- Removal of hard-coded mirrors
Additionally, centralize the gates on running 'dmidecode' on arm arches,
and update tests to address.
[1] https://developers.digitalocean.com/documentation/metadata/
|
|
Add vendor-data support to maas which will behave like the openstack
vendor-data does. Data returned from maas must be yaml loadable.
Also update the main in DataSourceMAAS to "just work" on a maas
deployed system.
LP: #1612313
|
|
This just adds 'tap' to the list of types that are understood to
be physical or virtual network devices. Openstack basically exposes
the type of the host device through.
LP: #1610784
|
|
This fixes an issue with the NoCloud datasource where it would not
recognize the 'network-interfaces' key provided in meta-data.
LP: 1577982
|
|
This improves smart os network configuration
- fix the SocketClient which was previously completely broken.
- adds support for configuring dns servers and dns search (based off the
sdc:dns_domain).
- support 'sdc:gateways' information from the datasource for configuring
default routes.
- add converted network information to output when module is run as a main
This does not support 'sdc:routes' as described at
http://eng.joyent.com/mdata/datadict.html
|
|
Only use strings in headers, as newer requests
actually do stricter validation of this, so ensure
that we comply by only having string objects in
header dicts.
|
|
|
|
Previous commit disabled the consumption of 'injected' files in
configdrive (openstack server boot --file=/target/file=local-file)
unless the datasource was in 'pass' mode. The default mode is 'net'
so that would never happen.
Also here are:
a.) a fix for 'links_path_prefix' string from debian, to finally
disable the rendering of systemd.link files (LP: #1594546)
b.) some comments to apply_network_config
c.) implement a backwards compatibility for for distros that do
not yet implement apply_network_config by converting the network
config into ENI format and calling apply_network.
This is required because prior to the previous commit, those distros
would have had 'apply_network' called with the openstack provided
ENI file. But after this change they will have apply_network_config
called by cloudinit's main.
d.) a network_state_to_eni helper for converting net config to eni
it supports the not-actually-correct 'hwaddress' field in ENI.
LP: #1602373
|
|
|
|
|
|
|
|
On upgrade and reboot, if datasource restored from obj.pkl did not have
a dsmode attribute, then 'init --local' would fail due to stack trace.
LP: #1596690
|
