| Age | Commit message (Collapse) | Author |
|---|
|
pacman uses `-u` instead of `upgrade` to trigger a system upgrade, fix
the command handling so this is properly accounted for. as is, the
resulting command attempts to install a (non-existent) `upgrade` package
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
With the changes for SSH public keys to be retrieved from IMDS as a
first option, when a key is passed through not in the raw SSH public key
format it causes an issue and the key is not added to the user's
authorized_keys file.
This PR will temporarily disable this behavior until a permanent fix is
put in place.
|
|
|
|
IPV6_AUTOCONF needs to be set to 'no' on RHEL so NetworkManager can
properly acquire ipv6 address.
rhbz: #1859695
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
|
|
|
|
This refactors cc_ca_certs to support non-ca-certificates distros, and
adds RHEL support.
|
|
Prevent network interfaces without IP addresses from being added to the
generated network configuration.
|
|
Fedora build system's rpmlint is complaining that there is a file with a
shebang but no executable flag set. No need to have shebang on this
file, so drop it.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
BOOTPROTO needs to be set to 'dhcp' on RHEL so NetworkManager can
properly acquire ipv6 address.
rhbz: #1859695
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Co-authored-by: Daniel Watkins <oddbloke@ubuntu.com>
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
|
|
Bump the version in cloudinit/version.py to 20.4 and
update ChangeLog.
LP: #1905440
|
|
Adds the ability to run the Azure preprovisioned VMs as NIC-less and
then hot-attach them when assigned for reprovision.
The NIC on the preprovisioned VM is hot-detached as soon as it reports
ready and goes into wait for one or more interfaces to be hot-attached.
Once they are attached, cloud-init gets the expected number of NICs (in
case there are more than one) that will be attached from IMDS and waits
until all of them are attached. After all the NICs are attached,
reprovision proceeds as usual.
|
|
Existing config writes keys to /etc/ssh after deleting files matching
a glob that includes certificate files. Since sshd looks for
certificates in the same directory as the keys, a host certificate
must be placed in this directory. This update enables the certificate's
contents to be specified along with the keys.
Co-authored-by: jonathan lung <lungj@heresjono.com>
Co-authored-by: jonathan lung <jlung@kepler.space>
|
|
On FreeBSD, if a UFS has trim: (-t) or MAC multilabel: (-l) flag, resize
FS fail, because the _can_skip_ufs_resize check gets tripped up by the
missing options.
This was reported at FreeBSD Bugzilla:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=250496 and as
LP: #1901958
Rather than fixing the parser as in the patches proposed there (and
attempted in #636) this pull-request rips out all of it, and simplifies
the code. We now use `growfs -N` and check if that returns an error. If
it returns the correct kind of error, we can skip the resize, because we
either are at the correct size, or the filesystem in question is broken
or not UFS. If it returns the wrong kind of error, we just re-raise it.
LP: #1901958
|
|
Pushing dmesg log to KVP to help troubleshoot VM boot issues
|
|
cc_set_password will only update the password for the default user if
cfg['password'] is set. The existing code of datasource Azure will fail
to update the default user's password because it does not set that
metadata. If the default user doesn't exist in the image, the current
code works fine because the password is set during user create and
not in cc_set_password
|
|
Increase Azure Endpoint HTTP retries to handle
occasional platform network blips.
Introduce a common method http_with_retries
in the azure.py helper, which will serve as
the common HTTP request handler for
all HTTP requests with the Azure endpoint.
This method has builtin retries and
reporting diagnostics logic.
|
|
On systems where the Azure datasource
is a viable platform for crawling metadata,
cloud-init occasionally encounters fatal
irrecoverable errors during the crawling
of the Azure datasource.
When this happens, cloud-init crashes,
and Azure VM provisioning would fail.
However, instead of failing immediately,
the user will continue seeing provisioning
for a long time until it times out with
"OS Provisioning Timed Out" message.
In these situations, cloud-init should
report failure to the Azure datasource
endpoint indicating provisioning failure.
The user will immediately see provisioning
terminate, giving them a much better
failure experience instead of pointlessly
waiting for OS provisioning timeout.
|
|
|
|
Allow root user to validate the userdata provided to the launched
machine using `cloud-init devel schema --system`
|
|
|
|
This commit does the following:
* introduces the `cloudinit.persistence` module, containing
`CloudInitPickleMixin` which provides lightweight versioning of
objects' pickled representations (and associated testing)
* introduces a basic upgrade testing framework (in
`cloudinit.tests.test_upgrade`) which unpickles pickles from previous
versions of cloud-init (stored in `tests/data/old_pickles`) and tests
invariants that the current cloud-init codebase expects
* uses the versioning framework to address an upgrade issue where
`Distro.networking` could get into an unexpected state, and uses the
upgrade testing framework to confirm that the issue is addressed
|
|
Make sure that gpg works even if the instance has no /dev/tty. This has
been observed on Debian.
LP: #1813396
|
|
This is a new builtin variable that appeared in Ubuntu in
5.1~rc2-1ubuntu1 and started causing daily build failures.
|
|
Largely speaking, ds-identify protects from this scenario being
hit, but if DataSourceRbxCloud ran and there was no metadata
disks found (LABEL=CLOUDMD), then it would stacktrace.
The fix is just to clean up the get_md function a little
bit, and the explicitly check for False as a return value in _get_data.
|
|
Add code so that specifying "wakeonlan: true" actually results in relevant
configuration entry appearing in /etc/network/interfaces, Netplan, and
sysconfig for RHEL and OpenSuse.
Add testcases for the above.
|
|
FreeBSD lets us read out kernel parameters with kenv(1), a user-space
utility that's shipped in "base" We can use it in place of dmidecode(8),
thus removing the dependency on sysutils/dmidecode, and the restrictions
to i386 and x86_64 architectures that this utility imposes on FreeBSD.
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
This allows the cloud-init log to be pushed multiple times during boot,
with the latest lines being pushed each time.
|
|
* Fix awkward English in sentence
* Add the missing word "the"
* Fix misspelling
* Add @jsf9k as a contributor
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
* Include both Ubuntu-style cfg file, and Debian-style directory in ENI
* Add WebSpider as contributor
|
|
a reboot after `gpart resize` hasn't been necessary since ca FreeBSD 9.2
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
This just separates the reading of dmi values into its own file.
Some things of note:
* left import of util in dmi.py only for 'is_container'
It'd be good if is_container was not in util.
* just the use of 'util.is_x86' to dmi.py
* open() is used directly rather than load_file.
|
|
Fix mounting of vfat filesystems by normalizing the different names for
vfat to "msdos" which works across BSDs.
|
|
For cc_users_groups the user setting "expiredate" must be quoted in
order for the relevant flag and value to be then passed to the useradd
command. It its vaiue is not quoted then it is treated as Python type
datetime.date and in `cloudinit/distros/__init__.py` the below "is it a
string" condition fails and so no "--expiredate" parameter is passed to
useradd and therefore it has no effect:
```
if key in useradd_opts and val and isinstance(val, str):
useradd_cmd.extend([useradd_opts[key], val])
```
For cc_users_groups, the user setting "inactive" does not actually
disable accounts, the useradd "--inactive" option actually defines the
number of days after password expiry that users can still login. So I
have changed the docs to show it taking a quoted value of days (which
works with the current code) rather than a boolean value. The quotes
are necessary, like expiredate above, so that the value is also passed
to the useradd command.
For cc_power_state_change.py the "delay" setting value needs to have
quotes around it as otherwise its leading plus sign will be stripped
off.
|
|
Fixes erroneous string/int comparison introduced in 1431c8a
metadata['instance-id'] is an integer but the value read from smbios is
a string. The comparision would cause TypeError.
|
|
Hetzner Cloud also provides the instance ID in SMBIOS information. Use
it to locally check_instance_id and to compared with instance_id from
metadata service.
LP: #1885527
|
|
The static and static6 subnet types for network_data.json were
being ignored by the Openstack handler, this would cause the code to
break and not function properly.
As of today, if a static6 configuration is chosen, the interface will
still eventually be available to receive router advertisements or be set
from NetworkManager to wait for them and cycle the interface in negative
case.
It is safe to assume that if the interface is manually configured to use
static ipv6 address, there's no need to wait for router advertisements.
This patch will set automatically IPV6_AUTOCONF and IPV6_FORCE_ACCEPT_RA
both to "no" in this case.
This patch fixes the specific behavior only for RHEL flavor and
sysconfig renderer. It also introduces new unit tests for the specific
case as well as adjusts some existent tests to be compatible with the
new options. This patch also addresses this problem by assigning the
appropriate subnet type for each case on the openstack handler.
rhbz: #1889635
rhbz: #1889635
Signed-off-by: Eduardo Otubo otubo@redhat.com
|
|
If an OVS bridge was used as the only/primary interface, the 'init'
stage failed with a "Not all expected physical devices present" error,
leaving the system with a broken SSH setup.
LP: #1898997
|
|
Reliable Scalable Cluster Technology (RSCT) is a set of software
components that together provide a comprehensive clustering
environment(RAS features) for IBM PowerVM based virtual machines. RSCT
includes the Resource Monitoring and Control (RMC) subsystem. RMC is a
generalized framework used for managing, monitoring, and manipulating
resources. RMC runs as a daemon process on individual machines and needs
creation of unique node id and restarts during VM boot.
LP: #1895979
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
Gentoo's hostname file format instead of being just the host name
is hostname=thename". The old code works fine when the file has no comments
but if there is a comment the line
```
gentoo_hostname_config = 'hostname="%s"' % conf
```
can render an invalid hostname file that looks similar to
```
hostname="#This is the host namehello"
```
The fix inserts the hostname in a gentoo friendly way so that it gets
handled by HostnameConf as a whole and comments are handled and preserved
|
|
ensure_file needed modification to support doing this, so this commit
also includes the following changes:
test_util: add tests for util.ensure_file
util: add preserve_mode parameter to ensure_file
util: add (partial) type annotations to ensure_file
LP: #1900837
|
|
update_resolve_conf_file is no longer used. The last reference
to it was removed in c3680475f9c970, which was itself a "remove dead
code" commit.
|
|
`create_swap()` was previously catching and not re-raising the
ProcessExecutionError that indicated swap creation failure; this meant
that the fallback logic could never be triggered.
This commit adds the required re-raise (as well as removing a duplicated
log message).
LP: #1897099
|
|
The following commit merged all ssh keys into a default user file
`~/.ssh/authorized_keys` in sshd_config had multiple files configured for
AuthorizedKeysFile:
commit f1094b1a539044c0193165a41501480de0f8df14
Author: Eduardo Otubo <otubo@redhat.com>
Date: Thu Dec 5 17:37:35 2019 +0100
Multiple file fix for AuthorizedKeysFile config (#60)
This commit ignored the case when sshd_config would have a single file for
AuthorizedKeysFile, but a non default configuration, for example
`~/.ssh/authorized_keys_foobar`. In this case cloud-init would grab all keys
from this file and write a new one, the default `~/.ssh/authorized_keys`
causing the bug.
rhbz: #1862967
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
|
|
bddeb builds a .deb package using the template packaging files in
packages/debian/.
The new --packaging-branch flag allows to specify a git branch
where to pull the packaging (i.e. the debian/ directory) from.
This is useful to build a .deb package from master with the very
same packaging which is used for the uploads.
|
|
DataSourceAzure previously writes the preprovisioning
reported ready marker file before it goes through the
report ready workflow. On certain VM instances, the
marker file is successfully written but then reporting
ready fails.
Upon rare VM reboots by the platform, cloud-init sees
that the report ready marker file already exists.
The existence of this marker file tells cloud-init
not to report ready again (because it mistakenly
assumes that it already reported ready in
preprovisioning).
In this scenario, cloud-init instead erroneously
takes the reprovisioning workflow instead of
reporting ready again.
|
|
Consider valid product names as valid chassis asset tags when detecting
OpenStack platform before crawling for OpenStack metadata.
As `ds-identify` tool uses product name as valid chassis asset tags,
let's replicate the behaviour in the OpenStack platform detection too.
This change should be backwards compatible and a temporary fix for the
current limitations on the OpenStack platform detection.
LP: #1895976
|
|
This moves logging into `report_diagnostic_event`, to clean up its callsites.
|
|
enumeration of physical network devices (#591)
|
|
The service installed by the CentOS and RHEL 'ntp' package is
ntpd.service
not
ntp.service
Fix that for those two distros.
Also fix chrony service from 'chrony' to 'chronyd'.
LP: #1897915
|
