| Age | Commit message (Collapse) | Author |
|---|
|
If the metadata service in the host is down while a guest that uses
DataSourceSmartOS is booting, the request from the guest falls into the
bit bucket. When the metadata service is eventually started, the guest
has no awareness of this and does not resend the request. This results in
cloud-init hanging forever with a guest reboot as the only recovery
option.
This fix updates the metadata protocol to implement the initialization
phase, just as is implemented by mdata-get and related utilities. The
initialization phase includes draining all pending data from the serial
port, writing an empty command and getting an expected error message in
reply. If the initialization phase times out, it is retried every five
seconds. Each timeout results in a warning message: "Timeout while
initializing metadata client. Is the host metadata service running?" By
default, warning messages are logged to the console, thus the reason for a
hung boot is readily apparent.
LP: #1667735
|
|
ext3 is not able to support file system sizes that are needed in Joyent's
cloud. For the default block size of 4k, the maximum filesystem size
for ext3 is 2^32 * 4096 = 16 TiB.
This changes the default file system type from ext3 to ext4.
LP: #1763511
|
|
Python has deprecated these invalid string literals now
https://bugs.python.org/issue27364
and pycodestyle is identifying them with a W605 warning.
https://github.com/PyCQA/pycodestyle/pull/676
So basically, any use of \ not followed by one of [\'"abfnrtv]
or \ooo (octal) \xhh (hex) or a newline is invalid. This is most
comomnly seen for us in regex. To solve, you either:
a.) use a raw string r'...'
b.) correctly escape the \ that was not intended to be interpreted.
|
|
If a file passed to render_from_file had non-ascii text then
jinja in python2 would decode as ascii, which would cause
UnicodeDecodeError. This issue can be re-created in python2
with just:
'can\xe2\x80\x99t'.decode()
The solution here is to explicitly pass in unicode supporting
type (py3 str, py2 unicode). Those are six.text_type.
Then jinja does not try to decode.
The reason we hit this is that load_file calls decode_binary.
decode_binary believes it has no work to do if it got a six.string_types.
isinstance('can\xe2\x80\x99t', six.string_types) == True
So it returns the original string which will blow up for jinja.
Our fix here then is to load the file in binary mode and explicitly
decode it to utf-8. Then in python2 we'll have a unicode type
and in python3 we'll have a string type.
|
|
Add a base NTP client configuration dictionary and allow Distro
specific changes to be merged. Add a select client function which
implements logic to preferr installed clients over clients which
need to be installed. Also allow distributions to override the
cloud-init defaults.
LP: #1749722
|
|
When filing a bug with apport, this allows the user to choose
Brightbox, IBM, LXD, or OpenTelekomCloud as their cloud.
|
|
LP: #1420018
|
|
The zfs/zpool commands will hang for 10 seconds if /dev/zfs is not
present (bug 1760173). This is a common occurence for containers
using zfs as rootfs. Additionally handle missing zpool command or
other errors that may occur while executing the zpool command.
|
|
Bump the version in cloudinit/version.py to be 18.2 and update ChangeLog.
LP: #1759318
|
|
This takes the same basic check that is in ds-identify. If the
DMI system manufacturer (aka sys_vendor) is not 'Hetzner', then exit
out of the datasource's get_data quickly.
|
|
Previously there was no support at all for zfs file system. With this
change it is now possible to use the resizefs module to grow a zpool to
its maximum partition size on FreeBSD.
LP: #1721243
|
|
Replace regressed cc_puppet functionality from a1f678f8.
The following content was inadvertently dropped:
- chown /var/lib/puppet/ssl as puppet:root.
- Automatic creation of /var/lib/puppet/ssl/certs
|
|
This just got missed in the IBMCloud datasource addition.
Add it to the builtin list of datasources.
|
|
This adds a specific IBM Cloud datasource.
IBM Cloud is identified by:
a.) running on xen
b.) one of a LABEL=METADATA disk or a LABEL=config-2 disk with
UUID=9796-932E
The datasource contains its own config-drive reader that reads
only the currently supported portion of config-drive needed for
ibm cloud.
During the provisioning boot, cloud-init is disabled.
See the docstring in DataSourceIBMCloud.py for more more information.
|
|
The recently added snap and ubuntu_advantage modules had unit tests
that exercised jsonschema. Those throw error if jsonschema is
not present. Fix to skip in that scenario.
|
|
The recent change to exception_cb missed this caller.
The result was a slow test.
|
|
Reducing timeout to 1 second as IMDS responds within a handful
of milliseconds. Also get rid of max_retries to prevent exiting
out of polling loop early due to IMDS outage / upgrade.
Reduce Azure PreProvisioning HTTP timeouts during polling to
avoid waiting an extra minute.
LP: #1752977
|
|
In commit e9e8616, there was an inversion of the logic of the
exception_cb return value meaning, breaking the (network) OpenStack
DataSource, which implemented exception_cb as should_retry_cb, returning
True when a retry should be done and False when the retry loop should
be broken and the exception reraised again immediately.
The OpenStack DS was the only user of this callback at the time and not
touched by the commit (nor did the commit message mention an intended
change), so this almost certainly happened by mistake.
These days, we have a second user of the callback in DataSourceScaleway.
It uses the new logic, so it needs change if we fix the meaning of the
return value.
This patch reverts the meaning of url_helper.read_url() execption_cb
to the old semantics. It updates the comment and adjusts the Scaleway
datasource.
The patch has been tested on Open Telekom Cloud (which uses the
OpenStack network Datasource) where previously a missing user_data
and network_data.json would be retried 6 times each despite them
not being present (they are optional!) and the server repsonding
with a correct 404. After the patch, boot times are 10s faster,
as we no longer pointlessly retry these files.
LP: #1702160
LP: #1298921
|
|
ubuntu-advantage-tools is a package for enabling and disabling extended
support services such as Extended Security Maintenance (ESM), Canonical
Livepatch and FIPS certified PPAs. Simplify Ubuntu Advantage setup on
machines by allowing users to provide a list of ubuntu-advantage commands
in cloud-config.
|
|
In network config v1 format, there are dns values which are not bound to a
specific interface and do not map to the per-interface format in netplan.
To handle this case we render netplan configuration that duplicates the
DNS configuration on any interface that has a static network config. We
avoiding interfaces which have DHCP configuration which may provide
conflicting DNS values.
LP: #1750884
|
|
DataSource.get_hostname call signature changed to allow for metadata_only
parameter. The metadata_only=True parameter is passed to get_hostname
during init-local stage in order to set the system hostname if present in
metadata prior to initial network bring up.
Fix subclasses of DataSource which have overridden get_hostname to allow
for metadata_only param.
LP: #1757176
|
|
OpenNebulaNetwork.gen_conf() was previously returning ENI format.
This is updated to return netplan/v2 config.
The changes here also adds support for IPv6 configuration distributed
from OpenNebula and fixes some issues about nameserver information.
|
|
The Hetzner Cloud metadata service is an AWS-style service available
over HTTP via the link local address 169.254.169.254.
https://hetzner.com/cloud
https://docs.hetzner.cloud/
|
|
When 'ip=' or 'ip6=' is found on the kernel command line,
cloud-init will consider read network config from /run/net-*.conf files.
There are some iscsi-root scenarios where initramfs configures networking
but the ip= parameter is not present. 2 such cases are:
a.) static config in /etc/iscsi/iscsi.initramfs (copied into the
initramfs)
b.) iBft
This changes cloud-init to consider initramfs provided networking
information if:
* there are /run/net-* files and
* (ip= or ip6 is on the command line) or open-iscsi.interface file
exists.
LP: #1752391
|
|
|
|
|
|
Support installing and configuring snaps on ubuntu systems. Now,
cloud-config files can provide a list or dictionary of snap:assertions
which will be allow configuration of snapd on a system via 'snap ack'
calls. The snap:commands configuration option supports arbitrary system
commands intended to interact with snappy's cli. This allows users to run
arbitrary snappy commands to create users, download, install and
configure snap packages and snapd.
This branch also deprecates old snappy and snap_config modules leaving
warnings in documentation and runtime for consumers of these modules.
Deprecated snap* modules will be dropped in cloud-init v.18.2 release.
|
|
Older unittest2.TestCase (as seen in CentOS 6) do not have an
assertRaisesRegex method. They only have the now-deprecated
assertRaisesRegexp.
We need our unit tests to work there and on newer python (3.6).
Simply making assertRaisesRegex = assertRaisesRegexp makes pylint
complain as described in https://github.com/PyCQA/pylint/issues/1946 .
What was here before this commit was actually broken. This commit
makes assertRaisesRegex functional in CentOS 6 and works around
the invalid Deprecated warning from pylint.
To prove this, we use assertRaisesRegex in a unit test which will
be exectued in py27, py3 and py26.
|
|
Update netplan renderer to write out bridge port-priority values
now that netplan supports the feature.
LP: #1735821
|
|
The command provided to subp can either be a string or a list. This patch
fixes a regression which raised CalledProcessError whenever providing a
string to subp.
LP: #1755965
|
|
Building doc would issue some warnings. This fixes all the warnings,
and changes the "code blocks" that were listed as 'bash' to instead
be 'shell-session'.
|
|
FreeBSD requires the hostname to be set to FQDN. Previously the hostname
just got set to short hostname (without FQDN part). Now cloud-init does
set the hostname to the FQDN on FreeBSD hosts if a valid FQDN is given.
LP: #1753499
|
|
When instance meta-data provides hostname information, run
cc_set_hostname in the init-local or init-net stage before network
comes up.
Prevent an initial DHCP request which leaks the stock cloud-image default
hostname before the meta-data provided hostname was processed.
A leaked cloud-image hostname adversely affects Dynamic DNS which
would reallocate 'ubuntu' hostname in DNS to every instance brought up by
cloud-init. These instances would only update DNS to the cloud-init
configured hostname upon DHCP lease renewal.
This branch extends the get_hostname methods in datasource, cloud and
util to limit results to metadata_only to avoid extra cost of querying
the distro for hostname information if metadata does not provide that
information.
LP: #1746455
|
|
This just centralizes a hunk of duplicated code and uses it from the
new location.
|
|
LP: #1754495
|
|
This makes 2 changes to shellify's behavior:
a.) raise a TypeError rather than a RuntimeError.
b.) raise a TypeError if input is not a list or tuple.
|
|
Previously the module was not working under FreeBSD due to a different
package name and some different paths. The module now has OS specific
default values which can even be customized via corresponding cloud config
variables.
LP: #1721503
|
|
Just replace a couple things like:
if b > a and b < c:
with:
if a < b < c:
|
|
This will provide a small performance improvement and shorter code.
|
|
Last set of changes to GCE datasource broke reading of user-data
unless the user had base64 encoded their user-data and also set
user-data-encoding to 'base64'.
This fixes the issue.
LP: #1752711
|
|
Make puppet installation more configurable by:
- Adding a package_name parameter
- Exposing the puppet configuration and puppet ssl directories as
parameters. These default to the previous values if unset, but can be set
to the new values puppetlabs requires for its puppet 4.x packages. This
way puppet 4 configuration is now possible.
LP: #1446804
|
|
If python starts up without a locale set, then its default encoding
ends up set as ascii. That is not easily changed with the likes of
setlocale. In order to avoid UnicodeDecodeErrors cloud-init will
encode to bytes a python3 string or python2 basestring so that the
values passed to Popen are already bytes.
LP: #1751051
|
|
While salt grains can be configured in the minion config file, it is
usually better to configure it in the /etc/salt/grains file.
This allows that to be done.
|
|
Bump the version in cloudinit/version.py to be 18.1 and update ChangeLog.
LP: #1751145
|
|
On few 64-bit platforms, the open-vm-tools package is installed at
/usr/lib64/. The DataSourceOVF is changed to search look there for the
'customization plugin'
|
|
When we moved some tests to live under cloudinit/ we inadvertantly
failed to change all things that would run nose to include that
directory.
This changes all the 'nose' invocations to consistently run with
tests/unittests and cloudinit/.
Also, it works around, more correctly this time, a python2.6-ism with
the following code:
with assertRaises(SystemExit) as cm:
sys.exit(2)
|
|
Fix an issue in EC2 where the datasource.identity had not been
initialized before being used when restoring datasource from pickle.
This is exposed in upgrade and reboot path.
LP: #1748354
|
|
Fix various corner cases for cloud-init status subcommand. Report
'runnning' under the following conditions:
- No /run/cloud-init/result.json file exists
- Any stage in status.json is unfinished
- status.json reports a non-null stage it is in progress on
LP: #1747965
|
|
net.apply_network_config_names currently only accepts network-config
in version 1 format. When users include a netplan format network-config the
rename code does not find any of the 'set-name' directives and does not rename
any of the interfaces. This causes some netplan configurations to fail.
This patch adds support for parsing netplan format and extracts the needed
information (macaddress and set-name values) to allow cloud-init to issue
interface rename commands. We know raise a RuntimeError if presented with
an unknown config format.
LP: #1709715
|
|
This fixes a bug where invalid keys would sneak into authorized_keys.
|
