| Age | Commit message (Collapse) | Author |
|---|
|
The subnet type 'manual' was used as a way to declare a device
and set an MTU for it but not assign network addresses.
This updates the manual example config to handle that case and
provides expected rendered output for sysconfig, eni, and netplan.
|
|
Making lots of random invalid DNS queries interferes with the ability
of security teams to identify malicious or anomalous behavior from DNS
logs. The same goal should be achievable with a consistent query for a
name that is disallowed.
LP: #1088611
|
|
Previously, sysconfig rendered HWADDR for all interface types, but
that value is only used to identify physical devices. Instead use
MACADDR to configure the MAC on virtual devices, like bonds and
bridges.
- Sort bond slave list to ensure consistent ordering in sysconfig
rendered files.
- Add unittests for sysconfig rendering of bonds/bridges with
mac_address
LP: #1701417
|
|
In some network configurations a network value of '::' and a
netmask value of '::' were used to indicate a default IPV6 gateway.
Commit d00da2d5 removed ipv6 'netmask' attributes and calculate
a prefix length value instead. The eni route rendering failed to update
the check to use prefix value of 0 to indicate the presence of an IPV6
default route.
A broken ipv6 default route rendered like:
post-up route add -net :: netmask :: gw 2001:4800:78ff:1b::1 || true
And with this patch, it now renders like:
post-up route add -A inet6 default gw 2001:4800:78ff:1b::1 || true
LP: #1701097
|
|
Render MTU values if present in subnet and route configurations
for v4 and v6.
LP: #1702513
|
|
Implement manual control for sysconfig by using ONBOOT=N. This
allows an interface to be configured but not brought up.
Note that ONBOOT is per-interface not per address.
LP: #1687725
|
|
Currently only the subnet is checked for 'ipv6' setting, however, the
routes array may include a mix of v4 or v6 configurations, in particular,
the gateway in a route may be ipv6, and if so, should export the value via
IPV6_DEFAULTGW in the ifcfg-XXXX file.
Additionally, if the route is v6, it should rendering a routes6-XXXX file;
this is present but missing the 'dev <interface>' scoping.
LP: #1694801
|
|
Previously, virtual types (bond, bridge, vlan) were almost completely
broken. They would not get any network configuration (ip addresses or
dhcp config) and or routes rendered. This fixes those issues.
For bonds we now correctly render BONDING_SLAVE entries.
Also add tests for simple bond, bridge and vlan.
LP: #1695092
|
|
With this change, entries in IPV6ADDR and IPV6ADDR_SECONDARIES will now
always be in format addr/prefix. When a subnet has a gateway will be
written. If the gateway is ipv6, use the key IPV6_DEFAULTGW rather than
GATEWAY.
LP: #1704872
|
|
The network device renaming code previously required the case of
the mac address input to match that of the data read from the system.
For example, if user provided network config with mac address
in upper case, then cloud-init would not rename the device correctly
as /sys/class/net/address stores lower case values.
The fix here is to always compare lower case mac addresses.
LP: #1705147
|
|
This includes a few fixes found when testing with python 3.6.
- fix eni renderer when target is None
This just uses the util.target_path() in the event that target is None.
- change test cases to not rely on the cached result of
util.get_cmdline() and other cached globals. Update the base TestCase
to unset that cache.
- mock calls to system_is_snappy from the create_users test cases.
- drop unused _pp_root in test_simple_run.py
LP: #1703697
|
|
Render the GATEWAY= value in interface files which have a gateway in the
subnet configuration.
LP: #1686856
|
|
Here we add and enable by default a datasource for Scaleway cloud.
The datasource quickly exits unless one of three things:
a.) 'Scaleway' found as the system vendor
b.) 'scaleway' found on the kernel command line.
c.) the directory /var/run/scaleway exists (this is currently created
by the scaleway initramfs module).
One interesting bit of this particular datasource is that it requires
the source port of the http request to be < 1024.
|
|
load_shell_content previously would not allow shell comment characters
in the content being parsed. If comments=True is not passed then an
exception would previously be raised as the line would not be guaranteed to
have an '=' in it.
|
|
Instead of passing around a 'log' reference to functions, just import
logging and use that. This is the pattern that is now more common in
cloud-init.
|
|
This fixes stacktrace and warning message that would be printed
to the log if running inside a container and read_dmi_data tried
to access a key that was not present.
In a container, the /sys/class/dmi/id data is not relevant to the
but to the host. Additionally an unpriviledged container might see
strange behavior:
# cd /sys/class/dmi/id/
# id -u
0
# ls -l chassis_serial
-r-------- 1 nobody nogroup 4096 Jun 29 16:49 chassis_serial
# cat chassis_serial
cat: /sys/class/dmi/id/chassis_serial: Permission denied
The solution here is to just always return None when running in a
container.
LP: #1701325
|
|
On systems with network devices with duplicate mac addresses, cloud-init
will fail to rename the devices according to the specified network
configuration. Refactor net layer to search by device driver and device
id if available. Azure systems may have duplicate mac addresses by
design.
Update Azure datasource to run at init-local time and let Azure datasource
generate a fallback networking config to handle advanced networking
configurations.
Lastly, add a 'setup' method to the datasources that is called before
userdata/vendordata is processed but after networking is up. That is
used here on Azure to interact with the 'fabric'.
|
|
- Simplify the logic of 'variant' in util.system_info
much of the data from
https://github.com/hpcugent/easybuild/wiki/OS_flavor_name_version
- fix get_resource_disk_on_freebsd when running on a system without
an Azure resource disk.
- fix tools/build-on-freebsd to replace oauth with oauthlib and add
bash which is a dependency for tests.
- update a fiew places that were checking for freebsd but not using
the util.is_FreeBSD()
|
|
The previous commit caused test failure.
This separates out _check_freebsd_cdrom and mocks it in a test
rather than patching open.
|
|
Fix the issue caused by different commands on Linux and FreeBSD. On Linux,
we used ifdown and ifup to enable and disable a NIC, but on FreeBSD, the
counterpart is "ifconfig down" and "ifconfig up".
LP: #1697815
|
|
The current method is to attempt to mount the cdrom (/dev/cd0), if it is
successful, /dev/cd0 is configured, otherwise, it is not configured. The
problem is it forgets to check whether the mounting destination folder is
created or not. As a result, mounting attempt failed even if cdrom is
ready.
LP: #1696295
|
|
Some versions of Cheetah returned everything as unicode by default (not
utf-8 or ascii) and some varieties of syslog would choke on unicode.
Jinja2 is probably fine, but Python's format() is perfectly adequate for
a short message like the welcome message.
Reviewed-by: Tom Kirchner <tjk@amazon.com>
Reviewed-by: Ben Cressey <bcressey@amazon.com>
|
|
Unix file modes are usually represented as octal, but they were being
interpreted as decimal, for example 0o644 would be printed as '420'.
Reviewed-by: Tom Kirchner <tjk@amazon.com>
|
|
On some systems with python-libselinux a bug[1] related to recursive
restorecon fails but the distro release does not yet include
an update. This change will accept the error and log a warning.
1. https://bugzilla.redhat.com/show_bug.cgi?id=1406520
LP: #1686751
|
|
On systems with selinux enabled, some of the networking commands executed
successfully do not return 0. Allow these commands to return 1 since the
output is valid.
Ultimately we need to get this information in some way so that we can
display it correctly. For now, work around the stack trace when selinux
does not allow us to collect it.
LP: #1686751
|
|
In cases where the config json specifies nameserver entries,
if there are interfaces configured to use dhcp, NetworkManager,
if enabled, will clobber the /etc/resolv.conf that cloud-init
has produced, which can break dns. If there are no interfaces
configured to use dhcp, NetworkManager could clobber
/etc/resolv.conf with an empty file.
This patch adds a mechanism for dropping additional configuration
into /etc/NetworkManager/conf.d/ and disables management of
/etc/resolv.conf by NetworkManager when nameserver information is
provided in the config.
LP: #1693251
Signed-off-by: Ryan McCabe <rmccabe@redhat.com>
|
|
The network_state object's network and route keys would have different
information depending upon how the network_state object was populated.
This change cleans that up. Now:
* address will always contain an IP address.
* prefix will always include an integer value that is the
network_prefix for the address.
* netmask will be present only if the address is ipv4, and its
value will always correlate to the 'prefix'.
|
|
- Updated to standard chef.io url
- Removed the port 4000, due to that has been deprecated
- Added Note about the run_list not being required
Signed-off-by: JJ Asghar <jj@chef.io>
|
|
Many changes here to get us able to build rpms on CentOS 5 or 6 and RHEL.
* add 'Requires' as 'BuildRequires' also.
This allows us to run cloud-init tools in the build environment, and
also will allow us to run tests in the build process.
* build for both systemd and upstart (centos 5) init systems.
* Add 'centos' as a variant
Adding the variant means we can use the 'centos' user as default on centos
rather than a 'fedora' or 'rhel'.
* drop argparse from the requirements.
On any system other than python 2.6, having a 'requirements' that mentions
argparse just causes problems. Instead we add that Requires to the spec
directly.
* list dependency on dmidecode (as redhat distro spec had)
* remove duplicate line in files section ({_unitdir}/cloud-*)
* Use rpm macros for init-system chunks and drop use
of init_system variable template
* Add el6 only build-req on python-argparse
* python-cheetah is not required in the build environment as the
the spec is already rendered. (We will soon move the spec to jinja).
|
|
Here we move the config/cloud.cfg to be rendered as a template.
That allows us to maintain deltas between distros in one place.
Currently we use 'variant' variable to make decisions.
A tools/render-cloudcfg is provided to render the file.
There were changes to setup.py, MANIFEST.in to allow us to put all
files into a virtual env installation and to render the cloud-config
file in 'install' or 'bdist' targets.
We have also included some config changes that were found in the
redhat distro spec.
* include some config changes from the redhat distro spec.
The rendered cloud.cfg has some differences.
Ubuntu: white space and comment changes only.
Freebsd:
- whitespace changes and comment changes
- datasource_list definition moved to be closer to 'datasource'.
- enable modules: migrator, write_files
- move package-update-upgrade-install to final.
The initial work was done by Josh Harlow.
|
|
Since f38fa413176, default routes get added to both ifcfg-* and route-*
and route6-* files. Default routes should only go to ifcfg-* files,
otherwise the information is redundant.
LP: #1696176
|
|
This allows the user to seed NoCloud in a trivial way from qemu/libvirt,
by using a stock image and passing a single command line flag. No custom
command line, no filesystem modification, no bootstrap disk image.
This is particularly handy now that Ec2 backend is discouraged from use
under bug 1660385.
LP: #1691772
|
|
The code deciding which interface to choose as the default to request the
IP address through DHCP does not sort the interfaces correctly. On Ubuntu
Xenial images for example, the interfaces are named ens1, ens2, ens3...,
ens11, ... depending on the pci bus address. The python sorting will list
'ens11' before 'ens3' for example despite the fact that 'ens3' should be
before 'ens11'.
This patch address this issue and sort the interface names according to a
human sorting.
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
|
|
In previous commit I inadvertantly left two calls to
asset_tag = util.read_dmi_data('chassis-asset-tag')
The second did not do anything useful. Thus, remove it.
|
|
Azure sets a known chassis asset tag to 7783-7084-3265-9085-8269-3286-77.
We can inspect this in both ds-identify and DataSource.get_data to
determine whether we are on Azure.
Added unit tests to cover these changes
and some minor tweaks to Exception error message content to give more
context on malformed or missing ovf-env.xml files.
LP: #1693939
|
|
cloud-config files are very flexible and permissive.
This adds a jsonsschema definition to the cc_ntp module and validation
functions in cloudinit/config/schema which will log warnings about
invalid configuration values in the ntp section.
A cmdline tools/cloudconfig-schema is added which can be used in our dev
environments to quickly attempt to exercise the ntp schema.
It is also exposed as a main in cloudinit.config.schema.
(python3 -m cloudinit.config.schema)
LP: #1692916
|
|
There are a few bridge parameters which require repeating the key with each
value in the list when rendering eni. Extend the network unittests to cover
all of the known bridge parameters and check we render eni and netplan
correctly.
|
|
During the network v2 merge, we inadvertently re-enabled rendering systemd
.link files. This files are not required as cloud-init already has to do
interface renaming due to issues with udevd which may refuse to rename
certain interfaces (such as veth devices in a LXD container). As such,
removing the code altogether.
|
|
AliYun cloud platform is now identifying themselves by setting the dmi
product id to the well known value "Alibaba Cloud ECS". The changes here
identify that properly in tools/ds-identify and in the DataSourceAliYun.
Since the 'get_data' for AliYun now identifies itself correctly, we can
enable AliYun by default.
LP: #1638931
|
|
Input (specifically OpenStack) that had:
"ip_address" : "104.130.20.155",
"netmask" : "255.255.255.0"
Was being rendered to netplan as '104.130.20.155/255.255.255.0'.
That is now fixed to '104.130.20.155/24'
Also fixed is reading of a route that had a network prefix integer
in the 'netmask' rather than a netmask.
LP: #1689346
LP: #1684349
|
|
This attempts to use udevadm settle to wait until devices have been
fully "realized". If a device exists, there may still be events in
the udev queue that would create its partition table entries.
We need to wait until those have been processed also.
LP: #1692093
|
|
Per the documentation at
https://cloud.google.com/compute/docs/storing-retrieving-metadata
The instance-level SSH key was named 'sshKeys' and now is 'ssh-keys'.
The project-level SSH key attribute has not changed so is intentionally
not changed here.
LP: #1693582
|
|
As some of the bond paramemters are passed in as dashed, or
underscored, depending on the input source.
Also correct transmit-hash-policy netplan target key.
LP: #1690480
|
|
Any CiTestCase subclass can now set a class attribute with_logs = True and
tests can now make assertions on self.logs.getvalue(). This branch
restructures a bit of cc_ntp module to get better test coverage of the
module. It also restructures the handler_cc_ntp unit tests to avoid nested
mocks where possible. Deeply nested mocks cause a couple of issues:
- greater risk: mocks are permanent within the scope, so multiple
call-sites could be affected by package mocks
- less legible tests: each mock doesn't advertise the actual call-site
- tight coupling: the unit test logic to tightly bound to the actual
implementation in remote (unrelated) modules which makes it more
costly to maintain code
- false success: we should be testing the expected behavior not specific
remote method names as we want to know if that underlying behavior
changes and breaks us.
LP: #1692794
|
|
This just moves flake8 and related tools up to newer versions and fixes
the complaints associated with that.
We added to the list of flake8 ignores:
H102: do not put vim info in source files
H304: no relative imports
Also updates and pins the following in the flake8 environment:
pep8: 1.7.0 => drop (although hacking still pulls it in).
pyflakes 1.1.0 => 1.5.0
hacking 0.10.2 => 0.13.0
flake8 2.5.4 => 3.3.0
pycodestyle none => 2.3.1
|
|
Dual stack IPv4/IPv6 configuration via config drive is broken for RHEL7.
This patch fixes several scenarios for IPv4/IPv6/dual-stack with multiple
IP assignment.
Removes usage of unpopular IPv4 alias files and invalid IPv6 alias files.
Also fix associated unit tests.
LP: #1679817
LP: #1685534
LP: #1685532
|
|
This fixes several shortcomings of disk_setup with gpt disks.
* 'sgdisk -p' was being used to determine the size of a disk.
this can fail if it believes there is a bad gpt partition table.
Instead we just use blockdev now for both mbr or gpt disks.
* parsing of sgdisk -p output assumed that the 'name' of the partition
type would not have any spaces (Microsoft basic data)
* interaction with sgdisk did not realize that sgdisk wants input
of '8300' rather than '83' and will output the same.
LP: #1692087
|
|
The motivation for this is to make tip-pylint target green.
It does 2 things:
a.) silence a warning that is generated in pylint 1.7.1, but not
other versions of pylint. This bug in pylint is filed at
https://github.com/PyCQA/pylint/issues/1444
b.) move tox -e pylint to use pylint 1.7.1
|
|
Some interfaces (greptap0 in the bug) have a mac address of
'00:00:00:00:00:00'. That was causing a duplicate mac detection
as the 'lo' device also has that mac.
The change here is to just ignore macs other than 'lo' that have that.
LP: #1692028
|
|
Previously, the datasource for DigitalOcean allowed for a gateway on each
NIC. As a result, on Ubuntu 16.04, networking.service was broken. For
17.04 and later, Ubuntu _replaces_ the default gateway with the second
gateway on 'ifup' after reboot.
DigitalOcean is looking at changing the meta-data, however, this will
result in another version of the meta-data JSON.
LP: #1681531.
|
