| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds the ability to deconfigure all the interfaces that
Cloud-init configured during deployment and remove the configuration
file `/etc/network/interfaces.d/50-cloud-init`. This should protect from
conflicts between CLI config and actual interfaces states.
|
|
Several nodes with "multi" type contain extra space character after
the `multi:` mark, which prevents the `cc_vyos_userdata` module to
detect their type properly. This commit changes the regex used for
detecting such nodes to fix the problem.
|
|
mask (255.255.255.0)
|
|
|
|
|
|
|
|
provided.
|
|
This commit reverts the 5b47d9dc1cd80e3dbd0fb21125febab2e99d5f9c and 57e53d13ad772a74f55c38d95f6d61623fe08633 since Cloud-init 20.4 is not affected by the problem.
|
|
filter.
|
|
|
|
|
|
In rare cases, udev scripts may try to rename ethernet interfaces at the first boot, including an interface used to configure the system. This leads to inconsistency between the config and actual interface names and sometimes to wrong interfaces (`renameX`).
If we will configure the `hw-id` option via Cloud-init, this must guarantee that interface will have a proper (expected) config and name.
|
|
The commit ceaa51c3df393d8bcfb8aa58e47d9d2eb7a9efb2 fixed receiving network-config for non-typical, "internal" datasources not addressed to be used normally, but broke this for normal ones.
So, this is the third time when this part of the module must be changed to combine both methods: `cloud.datasource.network_config` for normal and `init_stage._find_networking_config()` for internal.
|
|
This commit does not change any actually used in VyOS logic. It only copies changes from the upstream 20.4 to stay closer to the upstream code.
|
|
Merged with 20.4 tag from the upstream Cloud-init repository
|
|
With the new `cc_vyos_userdata.py` module is possible to set in User-Data (`#cloud-config`) new parameter `vyos_config_commands`. This parameter should be a list of VyOS configuration commands that will be applied during deployment.
The module will run after the Meta-Data module `cc_vyos.py`.
Commands requirements:
- one command per line
- if command ending by value, it must be inside single quotes: `set some option 'value'`, `delete some option 'value'`
- a single-quote symbol is not allowed inside command or value
The commands list produced by the `show configuration commands` command on a VyOS router should comply with all the requirements, so it is easy to get a proper commands list by copying it from another router.
Usage example (User-Data content):
```
#cloud-config
vyos_config_commands:
- set system host-name 'demo123'
- set system ntp server 1.pool.ntp.org
- set system ntp server 2.pool.ntp.org
- delete interfaces ethernet eth2 address
- set interfaces ethernet eth2 address '192.0.2.1/24'
```
|
|
Bump the version in cloudinit/version.py to 20.4 and
update ChangeLog.
LP: #1905440
|
|
Adds the ability to run the Azure preprovisioned VMs as NIC-less and
then hot-attach them when assigned for reprovision.
The NIC on the preprovisioned VM is hot-detached as soon as it reports
ready and goes into wait for one or more interfaces to be hot-attached.
Once they are attached, cloud-init gets the expected number of NICs (in
case there are more than one) that will be attached from IMDS and waits
until all of them are attached. After all the NICs are attached,
reprovision proceeds as usual.
|
|
Existing config writes keys to /etc/ssh after deleting files matching
a glob that includes certificate files. Since sshd looks for
certificates in the same directory as the keys, a host certificate
must be placed in this directory. This update enables the certificate's
contents to be specified along with the keys.
Co-authored-by: jonathan lung <lungj@heresjono.com>
Co-authored-by: jonathan lung <jlung@kepler.space>
|
|
On FreeBSD, if a UFS has trim: (-t) or MAC multilabel: (-l) flag, resize
FS fail, because the _can_skip_ufs_resize check gets tripped up by the
missing options.
This was reported at FreeBSD Bugzilla:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=250496 and as
LP: #1901958
Rather than fixing the parser as in the patches proposed there (and
attempted in #636) this pull-request rips out all of it, and simplifies
the code. We now use `growfs -N` and check if that returns an error. If
it returns the correct kind of error, we can skip the resize, because we
either are at the correct size, or the filesystem in question is broken
or not UFS. If it returns the wrong kind of error, we just re-raise it.
LP: #1901958
|
|
Pushing dmesg log to KVP to help troubleshoot VM boot issues
|
|
cc_set_password will only update the password for the default user if
cfg['password'] is set. The existing code of datasource Azure will fail
to update the default user's password because it does not set that
metadata. If the default user doesn't exist in the image, the current
code works fine because the password is set during user create and
not in cc_set_password
|
|
Increase Azure Endpoint HTTP retries to handle
occasional platform network blips.
Introduce a common method http_with_retries
in the azure.py helper, which will serve as
the common HTTP request handler for
all HTTP requests with the Azure endpoint.
This method has builtin retries and
reporting diagnostics logic.
|
|
On systems where the Azure datasource
is a viable platform for crawling metadata,
cloud-init occasionally encounters fatal
irrecoverable errors during the crawling
of the Azure datasource.
When this happens, cloud-init crashes,
and Azure VM provisioning would fail.
However, instead of failing immediately,
the user will continue seeing provisioning
for a long time until it times out with
"OS Provisioning Timed Out" message.
In these situations, cloud-init should
report failure to the Azure datasource
endpoint indicating provisioning failure.
The user will immediately see provisioning
terminate, giving them a much better
failure experience instead of pointlessly
waiting for OS provisioning timeout.
|
|
|
|
Allow root user to validate the userdata provided to the launched
machine using `cloud-init devel schema --system`
|
|
|
|
This commit does the following:
* introduces the `cloudinit.persistence` module, containing
`CloudInitPickleMixin` which provides lightweight versioning of
objects' pickled representations (and associated testing)
* introduces a basic upgrade testing framework (in
`cloudinit.tests.test_upgrade`) which unpickles pickles from previous
versions of cloud-init (stored in `tests/data/old_pickles`) and tests
invariants that the current cloud-init codebase expects
* uses the versioning framework to address an upgrade issue where
`Distro.networking` could get into an unexpected state, and uses the
upgrade testing framework to confirm that the issue is addressed
|
|
Make sure that gpg works even if the instance has no /dev/tty. This has
been observed on Debian.
LP: #1813396
|
|
This is a new builtin variable that appeared in Ubuntu in
5.1~rc2-1ubuntu1 and started causing daily build failures.
|
|
Largely speaking, ds-identify protects from this scenario being
hit, but if DataSourceRbxCloud ran and there was no metadata
disks found (LABEL=CLOUDMD), then it would stacktrace.
The fix is just to clean up the get_md function a little
bit, and the explicitly check for False as a return value in _get_data.
|
|
Add code so that specifying "wakeonlan: true" actually results in relevant
configuration entry appearing in /etc/network/interfaces, Netplan, and
sysconfig for RHEL and OpenSuse.
Add testcases for the above.
|
|
FreeBSD lets us read out kernel parameters with kenv(1), a user-space
utility that's shipped in "base" We can use it in place of dmidecode(8),
thus removing the dependency on sysutils/dmidecode, and the restrictions
to i386 and x86_64 architectures that this utility imposes on FreeBSD.
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
Since partition size is hardcoded into VyOS images for virtual environments, it is not impossible to use all available space on storage. This change enables two Cloud-init modules:
- `growpart` to grow persistence partition;
- `resizefs_vyos` to resize filesystem size to the whole partition.
The `resizefs_vyos` module forked from the main `resizefs` to allow resizing not only root partition but any custom also.
|
|
This allows the cloud-init log to be pushed multiple times during boot,
with the latest lines being pushed each time.
|
|
* Fix awkward English in sentence
* Add the missing word "the"
* Fix misspelling
* Add @jsf9k as a contributor
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
* Include both Ubuntu-style cfg file, and Debian-style directory in ENI
* Add WebSpider as contributor
|
|
a reboot after `gpart resize` hasn't been necessary since ca FreeBSD 9.2
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
This just separates the reading of dmi values into its own file.
Some things of note:
* left import of util in dmi.py only for 'is_container'
It'd be good if is_container was not in util.
* just the use of 'util.is_x86' to dmi.py
* open() is used directly rather than load_file.
|
|
Fix mounting of vfat filesystems by normalizing the different names for
vfat to "msdos" which works across BSDs.
|
|
For cc_users_groups the user setting "expiredate" must be quoted in
order for the relevant flag and value to be then passed to the useradd
command. It its vaiue is not quoted then it is treated as Python type
datetime.date and in `cloudinit/distros/__init__.py` the below "is it a
string" condition fails and so no "--expiredate" parameter is passed to
useradd and therefore it has no effect:
```
if key in useradd_opts and val and isinstance(val, str):
useradd_cmd.extend([useradd_opts[key], val])
```
For cc_users_groups, the user setting "inactive" does not actually
disable accounts, the useradd "--inactive" option actually defines the
number of days after password expiry that users can still login. So I
have changed the docs to show it taking a quoted value of days (which
works with the current code) rather than a boolean value. The quotes
are necessary, like expiredate above, so that the value is also passed
to the useradd command.
For cc_power_state_change.py the "delay" setting value needs to have
quotes around it as otherwise its leading plus sign will be stripped
off.
|
|
Fixes erroneous string/int comparison introduced in 1431c8a
metadata['instance-id'] is an integer but the value read from smbios is
a string. The comparision would cause TypeError.
|
|
Hetzner Cloud also provides the instance ID in SMBIOS information. Use
it to locally check_instance_id and to compared with instance_id from
metadata service.
LP: #1885527
|
|
The static and static6 subnet types for network_data.json were
being ignored by the Openstack handler, this would cause the code to
break and not function properly.
As of today, if a static6 configuration is chosen, the interface will
still eventually be available to receive router advertisements or be set
from NetworkManager to wait for them and cycle the interface in negative
case.
It is safe to assume that if the interface is manually configured to use
static ipv6 address, there's no need to wait for router advertisements.
This patch will set automatically IPV6_AUTOCONF and IPV6_FORCE_ACCEPT_RA
both to "no" in this case.
This patch fixes the specific behavior only for RHEL flavor and
sysconfig renderer. It also introduces new unit tests for the specific
case as well as adjusts some existent tests to be compatible with the
new options. This patch also addresses this problem by assigning the
appropriate subnet type for each case on the openstack handler.
rhbz: #1889635
rhbz: #1889635
Signed-off-by: Eduardo Otubo otubo@redhat.com
|
|
If an OVS bridge was used as the only/primary interface, the 'init'
stage failed with a "Not all expected physical devices present" error,
leaving the system with a broken SSH setup.
LP: #1898997
|
|
To provide connectivity to the CLI in cases when there were no credentials in metadata added a fallback user `vyos/vyos`.
|
|
Reliable Scalable Cluster Technology (RSCT) is a set of software
components that together provide a comprehensive clustering
environment(RAS features) for IBM PowerVM based virtual machines. RSCT
includes the Resource Monitoring and Control (RMC) subsystem. RMC is a
generalized framework used for managing, monitoring, and manipulating
resources. RMC runs as a daemon process on individual machines and needs
creation of unique node id and restarts during VM boot.
LP: #1895979
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
Gentoo's hostname file format instead of being just the host name
is hostname=thename". The old code works fine when the file has no comments
but if there is a comment the line
```
gentoo_hostname_config = 'hostname="%s"' % conf
```
can render an invalid hostname file that looks similar to
```
hostname="#This is the host namehello"
```
The fix inserts the hostname in a gentoo friendly way so that it gets
handled by HostnameConf as a whole and comments are handled and preserved
|
|
ensure_file needed modification to support doing this, so this commit
also includes the following changes:
test_util: add tests for util.ensure_file
util: add preserve_mode parameter to ensure_file
util: add (partial) type annotations to ensure_file
LP: #1900837
|
|
update_resolve_conf_file is no longer used. The last reference
to it was removed in c3680475f9c970, which was itself a "remove dead
code" commit.
|
