| Age | Commit message (Collapse) | Author |
|---|
|
The motivation for this is to make tip-pylint target green.
It does 2 things:
a.) silence a warning that is generated in pylint 1.7.1, but not
other versions of pylint. This bug in pylint is filed at
https://github.com/PyCQA/pylint/issues/1444
b.) move tox -e pylint to use pylint 1.7.1
|
|
Some interfaces (greptap0 in the bug) have a mac address of
'00:00:00:00:00:00'. That was causing a duplicate mac detection
as the 'lo' device also has that mac.
The change here is to just ignore macs other than 'lo' that have that.
LP: #1692028
|
|
Previously, the datasource for DigitalOcean allowed for a gateway on each
NIC. As a result, on Ubuntu 16.04, networking.service was broken. For
17.04 and later, Ubuntu _replaces_ the default gateway with the second
gateway on 'ifup' after reboot.
DigitalOcean is looking at changing the meta-data, however, this will
result in another version of the meta-data JSON.
LP: #1681531.
|
|
When vlan mac address is specified in config, render it for
netplan and for ENI.
LP: #1690388
|
|
It fixes an annoying typo/inconsistency ("ssh-autorized-keys" vs.
"ssh-authorized-keys"), adds descriptions of previously missing config
keys and improves overall consistency within the docs section.
|
|
On systems which installed ntp and specified servers or pools in the
config ntpd didn't notice the updated configuration file and didn't
use the correct configuration. Resolve this by rendering the template
first which allows the package install to use the existing
configuration. Additionally add a service restart to handle the case
where ntp does not need to be installed but it may not have started.
Add an integration test to confirm that cc_ntp enables ntp to use the
specific servers and pools in the cloud-config.
LP: #1645644
|
|
tools/net-convert fails to output netplan config, because the
positional arguments of render_network_state are the wrong way around
for that function w.r.t. other renders.
Fix the netplan renderer to have the correct signature.
LP: #1685944
|
|
Large instance types have a different disk format on the newly
partitioned ephemeral drive. So we have to adjust the logic in the
Azure datasource to recognize that a disk with 2 partitions and
an empty ntfs filesystem on the second one is acceptable.
This also adjusts the datasources's builtin fs_setup config to remove
the 'replace_fs' entry. This entry was previously ignored, and confusing.
I've clarified the doc on that also.
LP: #1686514
|
|
There was a copy/paste error in _get_url_settings such that the error
message would complain about max wait when in fact it was talking
about retries.
|
|
Apt related tests were broken when running on centos becasue apt is not
available. This fixes the unit test, with a small re-work of apt_configure.
Also in 'tox -e centos6' only run nose on tests/unittests as tests/
also contain integration tests that should not be run.
|
|
Recent core snap images (edge channel revision 1886) do not contain the
previously known files used to detect that a system is ubuntu core.
The changes here are to look in 2 additional locations to determine
if a system is snappy.
LP: #1689944
|
|
If /run/net-<name>.cfg contains an IPV4ADDR or an IPV6ADDR, the config
file generated by _klibc_to_config_entry now contains the "address".
LP: #1691135
|
|
Fixed setting Route.has_set_default_ipv6 or *_ipv4 to track whether a
route already has a default gateway defined. The code was setting
Route.has_set_default which wasn't checked when raising "duplicate
gateway" ValueErrors. Added unit tests to exercise this expected raised
ValueError. Also moved is_ipv6 = subnet.get('ipv6') logic out of a for
loop because we don't need to recalculate the same value every route
iteration.
LP: #1687485
|
|
This patch targets to make FreeBSD 10.3 or 11 work on Azure. The
modifications abide by the rule of:
* making as less modification as possible
* delegate to the distro or datasource where possible.
The main modifications are:
1. network configuration improvements, and movement into distro path.
2. Fix setting of password.
Password setting through "pw" can only work through pipe.
3. Add 'root:wheel' to syslog_fix_perms field.
4. Support resizing default file system (ufs)
5. copy cloud.cfg for freebsd to /etc/cloud/cloud.cfg rather than
/usr/local/etc/cloud/cloud.cfg.
6. Azure specific changes:
a. When reading the azure endpoint, search in a different path
and read a different option name (option-245 vs. unknown-245).
so, the lease file path should be generated according to platform.
b. adjust the handling of ephemeral mounts for ufs filesystem and
for finding the ephemeral device.
c. fix mounting of cdrom
LP: #1636345
|
|
If 'cmd' is provided to a fs_setup entry, then cloud-init was trying
to execute the rendered string as a single name, rather than
splitting the string. The change here will pass the string to
shell for interpretation so that it is split there.
Also fix some documentation errors and warn when fs_opts or overwrite
is provided along with 'cmd'.
LP: #1687712
|
|
The key is called "uri", not "url". This is what's used throughout the
examples and also what works in practice (verified on Ubuntu 16.10).
This also slightly improves formatting of the key names in the
related documentation.
|
|
ConfigObj produces configuration files that are incompatible with yum if
multiple values are listed for a configuration key. Switch to the builtin
configparser, and ConfigParser (Python 2) which correctly handles this
case.
Add additional test case for array values in yum_repos definition
LP: #1592150
|
|
Growing the root partition would fail in either of two cases:
a.) if the device /dev/root existed
b.) the kernel command line had upper case letters in PARTUUID=<value>
the kernel will accept upper case partuuid, but udev creates
links with lower case. In that scenario, we need to adjust to
a /dev/disk/by-<partuuid|uuid> with lower case.
The fix here addresses that, and also fixes uuid similarly for the
lowercase issue.
LP: #1684869
|
|
This will change all instances of LOG.warn to LOG.warning as warn
is now a deprecated method. It will also make sure any logging
uses lazy logging by passing string format arguments as function
parameters.
|
|
To query the metadata, the Cloudstack source currently scans a predefined
DHCP lease directories to find the IP of the DHCP server. This list does
not include "/var/lib/NetworkManager/" which is the default directory in
CentOS7. Add that directory to the list.
|
|
Introduce is_vlan function and call that when building dictionary of
interfaces by mac address.
LP: #1682871
|
|
|
|
Previously the IPv4LL address for metadata discovery was assigned to the
first interfaces from an alphabetic sort. On DigitalOcean, the metadata
is only accessible from the first interface. This fixes a problem where the
IPv4LL address is bound to the wrong interface with snapshots.
This is part of general improvements to the DigitalOcean Datasource in
bug 1676908.
|
|
Instead of only configuring 'public' and 'private' interfaces, we want
to configure any that has been defined in the meta-data. For legacy reasons,
the 'public' and 'private' interfaces are maintained as 'eth0' and 'eth1'
respectively.
This is part of bug 1676908 for general DigitalOcean datasource fixups.
|
|
Several references that were using URL shorteners are now broken due to
their service going away, making it painful to even figure out what they
were supposed to be pointing at. Put back long URLS using '# noqa' to
make flake8 happy.
LP: #1669727
|
|
On centos/fedora/rhel/derivatives, /etc/ssh/sshd_config has mode 0600,
but cloud-init unilaterally sets file modes to 0644 when no explicit
mode is passed to util.write_file. On ubuntu/debian, this file has
mode 0644. With this patch, write_file learns about the copy_mode
option, which will cause it to use the mode of the existing file by
default, falling back to the explicit mode parameter if the file does
not exist.
LP: #1644064
Resolves: rhbz#1295984
|
|
This change makes the DigitalOcean datasource consistent with OpenStack and
Joyent by binding the resolver addresses to the loopback interface. This _is_
a work-around to bug 1675571.
Part of bug 1676908.
|
|
Links presented in network_data.json to the guest running on ESXi
are of type 'dvs'.
LP: #1674946
|
|
When cloud-init ran in the init stage (after networking had come up).
A bug could occur where cloud-init would attempt and fail to rename
network devices that had "inherited" mac addresses.
The intent of apply_network_config_names was always to rename only
the devices that were "physical" per the network config. (This would
include veth devices in a container). The bug was in creating
the dictionary of interfaces by mac address. If there were multiple
interfaces with the same mac address then renames could fail.
This situation was guaranteed to occur with bonds or vlans or other
devices that inherit their mac.
The solution is to change get_interfaces_by_mac to skip interfaces
that have an inherited mac.
Also drop the 'devs' argument to get_interfaces_by_mac. It was
non-obvious what the result should be if a device in the input
list was filtered out. ie should the following have an entry for
bond0 or not. get_interfaces_by_mac(devs=['bond0'])
LP: #1669860
|
|
When rendering network configuration to netplan, remove known
"builtin" configurations. The specific example here is Ubuntu Core
that has netplan configuration in etc/netplan/00-snapd-config.yaml.
We also delete the derived files since netplan will have created
these derived files in its generator that runs well before cloud-init.
LP: #1675576
|
|
Remove debugging print statements. Change a few to use
logging.debug() where useful.
|
|
When booted without an initramfs, the root device will be /dev/root, not a
named device. There is partial support for this when resizing filesystems,
but not for growing partitions, without which it doesn't do much good. Move
the /dev/root resolution code to util.py and use it from cc_growpart.py.
Also, booting without an initramfs only works with a root= argument that's
either a kernel device name (which is unstable) or a partition UUID. Handle
the case of root=PARTUUID=value, not just LABEL and UUID.
LP: #1677376
|
|
Do not bother configuring apt if no 'apt' config is provided and either:
a.) running on snappy
b.) there is no 'apt' command (possibly a different distro)
If apt config is provided in either of the above situations, then config
will continue.
LP: #1675185
|
|
While documentation indicates that the smbios product name should
contain 'Google Compute Engine', experimentation and bug reports
indicate that is not always the case. The change here is to change
the check for GCE to also consider a serial number that starts with
'GoogleCompute-'.
Also, ds-identify was not currently searching for GCE if no config of
datasource_list was found. Most images have a datasource_list defined.
So update the list to include GCE.
LP: #1674861
|
|
This change will add support for hashed passwords in cc_set_passwords.
It checks if a password is a hash with by checking that it matches
in fairly safe way, and also that the password does not have a ":" in it.
chpasswd needs to know if the password is hashed or not, so two lists
is created so chpasswd is feed with the correct one.
LP: #1570325
|
|
Accordingly to the documentation:
The ``partition`` option may also be set to ``auto``, in which this
module will search for the existance of a filesystem matching the
``label``, ``type`` and ``device`` of the ``fs_setup`` entry and
will skip creating the filesystem if one is found.
However, using this "auto" flag always recreates the partition no matter
if it has been done before or not.
This commit fixes a bug in which the "partition" attribute was always
set to None although in some cases it should not.
LP: #1634678
|
|
This is thie cloud-init part of a fix to allow nova-lxd to provide
config drive data. The other part will be done in nova-lxd.
The agreement here is that nova-lxd will copy the contents of the
config drive to /config-drive in the container.
LP: #1673411
|
|
Now tox will run pylint. The .pylintrc file sets pylint to only produce
errors, and will ignore certain classes that are known problematic (six).
|
|
ef18b8ac4c added support for handing network config v2 (aka netplan
format). This just adds that feature to the list of supported features.
|
|
Python 2's json.loads would accept bytes, so this bug was
only exposed in python3.
|
|
When deploying on Azure and using only cloud-init, you must "bounce" the
network interface to trigger a DDNS update. This allows dhclient to
register the hostname with Azure so that DNS works correctly on their
private networks (i.e. between vm and vm).
The agent path was already doing the bounce so this creates parity
between the built-in path and the agent.
LP: #1674685
|
|
Network configuration version 2 format is implemented in a package
called netplan (nplan)[1] which allows consolidated network config
for multiple network controllers.
- Add a new netplan renderer
- Update default policy, placing eni and sysconfig first
This requires explicit policy to enable netplan over eni
on systems which have both (Yakkety, Zesty, UC16)
- Allow any network state (parsed from any format cloud-init supports) to
render to v2 if system supports netplan.
- Move eni's _subnet_is_ipv6 to common code for use by other renderers
- Make sysconfig renderer always emit /etc/syconfig/network configuration
- Update cloud-init.service systemd unit to also wait on
systemd-networkd-wait-online.service
1. https://lists.ubuntu.com/archives/ubuntu-devel/2016-July/039464.html
|
|
Previous commit introduced a regression by calling os.path.is_file, a
non-existent function. This changes that call to use os.path.isfile.
LP: #1674317
|
|
Previously, the distro had hard coded which network renderer it would
use. This adds support for just picking the right renderer based
on what is available.
Now, that can be set via a priority in system_info, but should
generally work. That config looks like:
system_info:
network:
renderers: ["eni", "sysconfig"]
When no renderers are found, a specific RendererNotFoundError is raised.
stages.py is modified to catch that and log it at error level. This
path should not really be exercised, but could occur if for example an
Ubuntu system did not have ifupdown, or a rhel system did not have
sysconfig. In such a system previously we would have quietly rendered
ENI configuration but that would have been ignored. This is one step
better in that we at least log the error.
|
|
This adds an integration test for setting passwords when given
as a list rather than a string. This also updates the docs and
tests so that Random is now RANDOM as is correct.
|
|
render_network_state should default to rendering on /.
The changes here just make it so render_network_state does not
require a target, but defaults to None, and uses target_path
to handle that.
|
|
As reported in bug 1671927, sysconfig had an issue with rendering
a loopback device. The problem was that some as yet unknown issue was
causing the openstack config drive to parse the provided ENI file rather
than reading the network_data.json. Parsing an ENI file would add a
a 'lo' device of type 'physical', and sysconfig was failing to render
that.
The change here is:
a.) add a 'loopback' type rather than 'physical' for network config.
{'name': 'lo', 'type': 'loopback', 'subnets': ['type': 'loopback']}
b.) support skipping that type in the eni and sysconfig renderers.
c.) make network_state just piggy back on 'physical' renderer for
loopback (this was what was happening before).
Tests are added for eni and sysconfig renderer.
|
|
Omnibus installation of chef was broken under python3.
LP: #1583837
|
|
This exposes a mechanism for users of cloud-init to determine if
a version has a specific feature, and adds documentation to that affect.
We list an existing feature NETWORK_CONFIG_V1 as an example.
Also add a 'features' subcommand for listing these to stdout.
|
|
The adjusted change did not support
#cloud-config
password: passw0rd
This correctly fixes that regression.
|
