| Age | Commit message (Collapse) | Author |
|---|
|
Added an unattended installer, compatible with similar from VyOS 1.3.
Check the `config/cloud.cfg.d/20_vyos_install.cfg` for configuration details.
|
|
Cloud-init in environments where Meta-data is available via network configures
the main interface and keeps the config in `/etc/network/interfaces.d/`.
This config later interferes with the VyOS configuration.
To avoid the problem previously the code in the `cc_vyos.py` module was used,
but this is not enough. The module is running only once during instance
deployment. But Cloud-init will re-add the config file with each boot.
There are two ways to solve this incompatibility (within Cloud-init) - disable
network config or perform cleanup during each boot.
Disabling network config is not correct in this context, because it blocks the
ability to fetch Meta-data after the first boot, which in turn blocks the
ability to run per-boot modules with an updated config.
Therefore, the cleanup code was extracted to an independent
`cc_vyos_ifupdown.py` module that performs proper cleanup with each boot.
|
|
Merged with 22.1 tag from the upstream Cloud-init repository.
Our modules were slightly modified for compatibility with the new
version.
|
|
|
|
Adds a new module to allow setting keyboard layout,
for use-cases in which cloud-init is used to configure
OS images meant for physical computers instead
of the cloud.
This initial release only implements support
for Linux distributions that allow layout to be
set through systemd's localectl.
LP: #1951593
|
|
|
|
This commit removes automatically installing udev rules for hotplug
and adds a module to install them instead.
Automatically including the udev rules and checking if hotplug was
enabled consumed too many resources in certain circumstances. Moving the
rules to a module ensures we don't spend extra extra cycles on hotplug
if hotplug functionality isn't desired.
LP: #1946003
|
|
The main idea is to introduce a second module that takes care of
writing files, but in the 'final' stage.
While the introduction of a second module would allow for choosing
the appropriate place withing the order of modules (and stages),
there is no addition top-level directive being added to the cloud
configuration schema. Instead, 'write-files' schema is being extended
to include a 'defer' attribute used only by the 'write-deffered-files'
modules.
The new module 'write-deferred-files' reuses as much as
possible of the 'write-files' functionality.
|
|
openEuler Homepage: https://www.openeuler.org/en/
|
|
https://www.cloudlinux.com/
|
|
|
|
Currently cloud-init generates fallback network config on various
scenarios.
For example:
1. When no DS found
2. There is no 'network' info given in DS metadata.
3. If a DS gives a network config once and upon reboot if DS doesn't
give any network info, previously set network data will be
overridden.
A newly introduced key in cloud.cfg.tmpl can be used to control this
behavior on PhotonOS.
Also, if OS comes with a set of default network files(configs), like in
PhotonOS, cloud-init should not overwrite them by default.
This change also includes some nitpicking changes of reorganizing few
config variables.
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
|
|
Virtuozzo Linux is a distro based off of CentOS 8, similar to Alma Linux and Rocky Linux.
|
|
Minor fixes in networkd renderer & fixed corresponding tests
Removed datasource_list for Photon from cloud.cfg.tmpl & added a comment
in cloud.cfg.tmpl about not to use multiline array for datasource_list.
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
|
|
Also added a new (currently experimental) systemd-networkd renderer,
and includes a small refactor to cc_resolv_conf.py to support the
resolved.conf used by systemd-resolved.
|
|
- Mostly based on FreeBSD, the main exception is that
`find_devs_with_on_freebsd` does not work.
- Since we cannot get the CDROM or the partition labels,
`find_devs_with_on_dragonflybsd()` has a more naive approach and
returns all the block devices.
|
|
Rocky Linux is a RHEL-compatible distribution so all changes that have
been made should be trivial.
|
|
AlmaLinux OS is RHEL-compatible so all the changes needed are trivial.
|
|
The `write_files` module allows to provides files to the system at deployment. This can be useful for situations when they are required to make a configuration valid, for example - security keys, certificates, etc.
|
|
Merged with 20.4 tag from the upstream Cloud-init repository
|
|
With the new `cc_vyos_userdata.py` module is possible to set in User-Data (`#cloud-config`) new parameter `vyos_config_commands`. This parameter should be a list of VyOS configuration commands that will be applied during deployment.
The module will run after the Meta-Data module `cc_vyos.py`.
Commands requirements:
- one command per line
- if command ending by value, it must be inside single quotes: `set some option 'value'`, `delete some option 'value'`
- a single-quote symbol is not allowed inside command or value
The commands list produced by the `show configuration commands` command on a VyOS router should comply with all the requirements, so it is easy to get a proper commands list by copying it from another router.
Usage example (User-Data content):
```
#cloud-config
vyos_config_commands:
- set system host-name 'demo123'
- set system ntp server 1.pool.ntp.org
- set system ntp server 2.pool.ntp.org
- delete interfaces ethernet eth2 address
- set interfaces ethernet eth2 address '192.0.2.1/24'
```
|
|
Since partition size is hardcoded into VyOS images for virtual environments, it is not impossible to use all available space on storage. This change enables two Cloud-init modules:
- `growpart` to grow persistence partition;
- `resizefs_vyos` to resize filesystem size to the whole partition.
The `resizefs_vyos` module forked from the main `resizefs` to allow resizing not only root partition but any custom also.
|
|
Reliable Scalable Cluster Technology (RSCT) is a set of software
components that together provide a comprehensive clustering
environment(RAS features) for IBM PowerVM based virtual machines. RSCT
includes the Resource Monitoring and Control (RMC) subsystem. RMC is a
generalized framework used for managing, monitoring, and manipulating
resources. RMC runs as a daemon process on individual machines and needs
creation of unique node id and restarts during VM boot.
LP: #1895979
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
Merged with 20.3 tag from the upstream Cloud-init repository
|
|
VyOS-specific configuration were moved from the `cloud.cfg.tmpl` to the separated file `cloud.cfg.d/10_vyos.cfg`.
With changes in the default template, some build tests failed, and everything from this default configuration can be overwritten in the config file, so there is no strict necessity to keep our changes in the configuration template.
|
|
Add new module cc_apk_configure for creating Alpine /etc/apk/repositories file.
Modify cc_ca_certs, cc_ntp, cc_power_state_change, and cc_resolv_conf for Alpine.
Add Alpine template files for Chrony and Busybox NTP support.
Add Alpine template file for /etc/hosts.
|
|
* Add update_etc_hosts as default module on *BSD
* Set preference of IPv6 over IPv4 in FreeBSD /etc/hosts
|
|
On a system with a non-utf8 default locale, the logger will silently
not log anything if the message contains an unsupported character.
|
|
These config management things work on BSD, they also claim to work on all distros, so enabling them!
LP: #1880279
|
|
On Focal and later, Ubuntu will prioritize netplan renderer over eni,
even if ifupdown and netplan are both installed.
ENI on Focal and later is considered an unsupported configuration so
cloud-init should generally prefer netplan. On many cloud images,
the /etc/network/interfaces config file does not include the dir
/etc/network/interfaces.d thereby ignoring cloud-init's
/etc/network/interfaces.d/50-cloud-init.cfg file.
LP: #1867029
|
|
- tested on OpenBSD 6.6
- tested on OpenStack without config drive, and NoCloud with ISO config
drive
|
|
Add support for the NetBSD Operating System.
Features in this branch:
* Add BSD distro parent class from which NetBSD and FreeBSD can
specialize
* Add *bsd util functions to cloudinit.net and cloudinit.net.bsd_utils
* subclass cloudinit.distro.freebsd.Distro from bsd.Distro
* Add new cloudinit.distro.netbsd and cloudinit.net.renderer for
netbsd
* Add lru_cached util.is_NetBSD functions
* Add NetBSD detection for ConfigDrive and NoCloud datasources
This branch has been tested with:
- NoCloud and OpenStack (with and without config-drive)
- NetBSD 8.1. and 9.0
- FreeBSD 11.2 and 12.1
- Python 3.7 only, because of the dependency oncrypt.METHOD_BLOWFISH.
This version is available in NetBSD 7, 8 and 9 anyway
|
|
- Merge 20.1 version from the Canonical repository
- Removed unneeded changes in datasources (now only OVF datasource is not equal to upstream's version)
- Adapted cc_vyos module to new Cloud-init version
- Changed Jenkinsfile to use build scripts, provided by upstream
|
|
|
|
cloud-init has moved to cc_snap module and a top-level
config key 'snap'. cc_snap_config was deprecated in
cloud-init version 18.2
Co-authored-by: Daniel Watkins <daniel@daniel-watkins.co.uk>
|
|
* cc_snappy: remove deprecated module
* cloud_tests: remove cc_snappy tests (and references)
This module was deprecated in favor of cc_snap in cloud-init v.18.2
|
|
Update README to specify that only files with the '.cfg' extension are
read in this folder.
LP: #1855006
|
|
- Detect Arch Linux and set variant accordingly in `system_info()`
- Allow setting render-cloudcfg variant parameter to 'arch'
- Adjust some basic settings for Arch Linux in the cloud.cfg.tmpl
The template might need some additional Arch-specific tweaks in the
future, but at least for now the generated config works and contains
the most relevant modules.
Also:
- Sort distro variant lists when adding Arch
- Add debian to known variants in render-cloudcfg
|
|
blkid is a Linux-only command. With this patch, cloud-init uses another
approach to find the data source on FreeBSD.
LP: #1645824
|
|
The ubuntu_drivers config module enables usage of the 'ubuntu-drivers'
command. At this point it only serves as a way of installing NVIDIA
drivers for general purpose graphics processing unit (GPGPU)
functionality.
Also, a small usability improvement to get_cfg_by_path to allow it to
take a string for the key path
"toplevel/second/mykey"
in addition to the original:
("toplevel", "second", "mykey")
|
|
Infrastructure is now set up for Ubuntu to handle Amazon instances
hitting a ports archive at:
- http://%(ec2_region)s.ec2.ports.ubuntu.com/ubuntu-ports/
And additionally, generic mirrors at
*.clouds.ports.ubuntu.com/ubuntu-ports
The change here will utilize those mirrors for the arm64, armel and
armhf arches.
We've decided to limit the auto-selection of those
mirrors to arm, where we know a use case. That way new instances
of ppc64el or other arches will not select them. Such a behavior change
could be problematic for a user in a firewalled environment.
LP: #1805854
|
|
|
|
This changes redhat's default behavior to remove the ssh keys on
new instance (ssh_deletekeys will now be at its default true value).
On redhat systems, cloud-init.service has both:
Wants=sshd-keygen.service
Before=sshd-keygen.serviceh
Which is why 'ssh_genkeytypes' is set to None
(yaml '~' == yaml null == python none).
I've changed that to be null as it seems more clear and we do not
use the tilda anywhere else in configs.
LP: #1781094
rhbz: https://bugzilla.redhat.com/show_bug.cgi?id=1598832
|
|
Add a base NTP client configuration dictionary and allow Distro
specific changes to be merged. Add a select client function which
implements logic to preferr installed clients over clients which
need to be installed. Also allow distributions to override the
cloud-init defaults.
LP: #1749722
|
|
ubuntu-advantage-tools is a package for enabling and disabling extended
support services such as Extended Security Maintenance (ESM), Canonical
Livepatch and FIPS certified PPAs. Simplify Ubuntu Advantage setup on
machines by allowing users to provide a list of ubuntu-advantage commands
in cloud-config.
|
|
Support installing and configuring snaps on ubuntu systems. Now,
cloud-config files can provide a list or dictionary of snap:assertions
which will be allow configuration of snapd on a system via 'snap ack'
calls. The snap:commands configuration option supports arbitrary system
commands intended to interact with snappy's cli. This allows users to run
arbitrary snappy commands to create users, download, install and
configure snap packages and snapd.
This branch also deprecates old snappy and snap_config modules leaving
warnings in documentation and runtime for consumers of these modules.
Deprecated snap* modules will be dropped in cloud-init v.18.2 release.
|
|
Previously the module was not working under FreeBSD due to a different
package name and some different paths. The module now has OS specific
default values which can even be customized via corresponding cloud config
variables.
LP: #1721503
|
|
On SUSE distributions the neither the "adm" nor the "wheel" group are set
up by default causing log file permission change to fail. Set the
user:group to root:root in the cloud-init default config file generated
during install.
boo: 1080595
|
|
This adds a config module so support for adding zypper repositories
via cloud-config.
LP: #1718675
|
|
Things done here:
- identify 'suse' as a variant in util.system_info and
also tools/render-cloudcfg.
- update systemd and cloud.cfg templates for suse specific changes.
LP: #1718640
|
