| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This patch finally introduces the Cloud-Init Datasource for VMware
GuestInfo as a part of cloud-init proper. This datasource has existed
since 2018, and rapidly became the de facto datasource for developers
working with Packer, Terraform, for projects like kube-image-builder,
and the de jure datasource for Photon OS.
The major change to the datasource from its previous incarnation is
the name. Now named DatasourceVMware, this new version of the
datasource will allow multiple transport types in addition to
GuestInfo keys.
This datasource includes several unique features developed to address
real-world situations:
* Support for reading any key (metadata, userdata, vendordata) both
from the guestinfo table when running on a VM in vSphere as well as
from an environment variable when running inside of a container,
useful for rapid dev/test.
* Allows booting with DHCP while still providing full participation
in Cloud-Init instance data and Jinja queries. The netifaces library
provides the ability to inspect the network after it is online,
and the runtime network configuration is then merged into the
existing metadata and persisted to disk.
* Advertises the local_ipv4 and local_ipv6 addresses via guestinfo
as well. This is useful as Guest Tools is not always able to
identify what would be considered the local address.
The primary author and current steward of this datasource spoke at
Cloud-Init Con 2020 where there was interest in contributing this datasource
to the Cloud-Init codebase.
The datasource currently lives in its own GitHub repository at
https://github.com/vmware/cloud-init-vmware-guestinfo. Once the datasource
is merged into Cloud-Init, the old repository will be deprecated.
|
|
Implement missing device_aliases feature
The device_aliases key has been documented as part of disk_setup for
years, however the feature was never implemented. This implements the
feature as documented allowing usercfg (rather than dsconfig) to create
a mapping of device names.
This is not to be confused with disk_aliases, a very similar map but
existing solely for use by datasources.
LP: #1867532
|
|
|
|
The name "DigitalOcean" doesn't have a space in it; it's a single
compound word written in Pascal case (upper camel case).
|
|
- small document update for ReportEventStack explaining post_files
parameter
- small unit test for test_reporting demonstrating the close of an
event with optional post_files list
|
|
Rocky Linux is a RHEL-compatible distribution so all changes that have
been made should be trivial.
|
|
|
|
Changed year 2012 into 2032
|
|
AlmaLinux OS is RHEL-compatible so all the changes needed are trivial.
|
|
|
|
Move chef_license from TPL_PATH_KEYS to TPL_KEYS as the chef license
setting is not a path but must be added to the client config template.
Fixes file or folder not found exception raised from ensure_dirs.
|
|
The blkdev command is fragile re-reading partition tables if a
partition is mounted. This change instead uses the partprobe if
it is available.
LP: #1920939
|
|
This PR adds in support so that cloud-init can run on instances
deployed on Vultr cloud. This was originally brought up in #628.
Co-authored-by: Eric Benner <ebenner@vultr.com>
|
|
When bringing up DHCP-provided static routes, we check for "0.0.0.0/0"
to indicate an unspecified gateway. However, when parsing the static
route in `parse_static_routes`, the gateway is never specified with
a net length, so the "/0" will never happen.
This change updates the gateway check to check only for "0.0.0.0".
|
|
|
|
key is a property of source1 and not sources
|
|
The implementation in existing datasources means that vendordata_raw is
not "raw" as it ideally would be. Instead, actual values may include
bytes, string or list. If the value was a list, then the attempt to
persist that data to a file in '_store_rawdata' would raise a
TypeError.
The change is to encode with util.json_dumps (which is safe for
binary data) before writing.
|
|
hostname (inetutils) isn't installed per default on arch, so switch
to hostnamectl which is installed per default (systemd).
|
|
It is distro dependent whether hostname or fqdn is used
|
|
Signed-off-by: Jordi Massaguer Pla <jmassaguerpla@suse.de>
|
|
|
|
|
|
Two shell code blocks are not marked as such, confusing rst to consider
them as yaml. Be explicit about their syntax, and use $ prompt to match
elsewhere in the docs.
/home/travis/build/canonical/cloud-init/doc/rtd/topics/format.rst:28: WARNING: Could not lex literal_block as "yaml". Highlighting skipped.
/home/travis/build/canonical/cloud-init/doc/rtd/topics/format.rst:52: WARNING: Could not lex literal_block as "yaml". Highlighting skipped.
Signed-off-by: Dan Kenigsberg <danken@redhat.com>
|
|
|
|
Route '-net' parameter is incompatible with /32 IPv4 addresses so we
have to use '-host' in that case.
|
|
pacman uses `-u` instead of `upgrade` to trigger a system upgrade, fix
the command handling so this is properly accounted for. as is, the
resulting command attempts to install a (non-existent) `upgrade` package
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
|
|
1. fix a typo in cloud-init.1
2. add xiachen-rh as contributor
|
|
This refactors cc_ca_certs to support non-ca-certificates distros, and
adds RHEL support.
|
|
This commit removes lines which are invalid configuration.
|
|
|
|
Adds the ability to run the Azure preprovisioned VMs as NIC-less and
then hot-attach them when assigned for reprovision.
The NIC on the preprovisioned VM is hot-detached as soon as it reports
ready and goes into wait for one or more interfaces to be hot-attached.
Once they are attached, cloud-init gets the expected number of NICs (in
case there are more than one) that will be attached from IMDS and waits
until all of them are attached. After all the NICs are attached,
reprovision proceeds as usual.
|
|
Existing config writes keys to /etc/ssh after deleting files matching
a glob that includes certificate files. Since sshd looks for
certificates in the same directory as the keys, a host certificate
must be placed in this directory. This update enables the certificate's
contents to be specified along with the keys.
Co-authored-by: jonathan lung <lungj@heresjono.com>
Co-authored-by: jonathan lung <jlung@kepler.space>
|
|
Make sure that gpg works even if the instance has no /dev/tty. This has
been observed on Debian.
LP: #1813396
|
|
* Fix awkward English in sentence
* Add the missing word "the"
* Fix misspelling
* Add @jsf9k as a contributor
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
* Include both Ubuntu-style cfg file, and Debian-style directory in ENI
* Add WebSpider as contributor
|
|
If an OVS bridge was used as the only/primary interface, the 'init'
stage failed with a "Not all expected physical devices present" error,
leaving the system with a broken SSH setup.
LP: #1898997
|
|
Reliable Scalable Cluster Technology (RSCT) is a set of software
components that together provide a comprehensive clustering
environment(RAS features) for IBM PowerVM based virtual machines. RSCT
includes the Resource Monitoring and Control (RMC) subsystem. RMC is a
generalized framework used for managing, monitoring, and manipulating
resources. RMC runs as a daemon process on individual machines and needs
creation of unique node id and restarts during VM boot.
LP: #1895979
Co-authored-by: Scott Moser <smoser@brickies.net>
|
|
Gentoo's hostname file format instead of being just the host name
is hostname=thename". The old code works fine when the file has no comments
but if there is a comment the line
```
gentoo_hostname_config = 'hostname="%s"' % conf
```
can render an invalid hostname file that looks similar to
```
hostname="#This is the host namehello"
```
The fix inserts the hostname in a gentoo friendly way so that it gets
handled by HostnameConf as a whole and comments are handled and preserved
|
|
Consider valid product names as valid chassis asset tags when detecting
OpenStack platform before crawling for OpenStack metadata.
As `ds-identify` tool uses product name as valid chassis asset tags,
let's replicate the behaviour in the OpenStack platform detection too.
This change should be backwards compatible and a temporary fix for the
current limitations on the OpenStack platform detection.
LP: #1895976
|
|
Under FreeBSD, we want to use "shutdown -p" for poweroff.
Alpine Linux also has some specificities.
We choose to define a method that returns the shutdown command line to
use, rather than a method that actually does the shutdown. This makes it
easier to have the tests in test_handler_power_state do their
verifications.
Two tests are added for the special behaviours that are known so far.
|
|
|
|
Update ssh_util.py with latest list of keys (from openssh-8.3p1/sshkey.c),
Added keys:
sk-ecdsa-sha2-nistp256-cert-v01@openssh.com
sk-ecdsa-sha2-nistp256@openssh.com
sk-ssh-ed25519-cert-v01@openssh.com
sk-ssh-ed25519@openssh.com
ssh-xmss-cert-v01@openssh.com
ssh-xmss@openssh.com
LP: #1877869
|
|
This PR refactors Azure report ready code to include more robust tests and telemetry.
|
|
Few of the 'User and Groups' configurations in cloud-config have no effect on
already existing users. This was not documented earlier.
This change set adds that information to documentation.
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
|
|
|
|
* Fix a typo in apt pipelining module
Changed `whcih` to `which`.
* Update .github-cla-signers
I have signed the CLA on Canonical's site, adding my username to list of CLA signers.
* Update .github-cla-signers
I need to sort the list alphabetically.
|
|
Update DataSourceNoCloud and ds-identify to recognize LABEL_FATBOOT labels from blkid.
Also updated associated tests.
LP: #1841466
|
|
|
