| Age | Commit message (Collapse) | Author |
|---|
|
Handlers for per-boot/per-instance/per-once multipart MIME
Add handlers for adding scripts to userdata that can be run at various
frequencies. Scripts of type x-shellscript-per-boot,
x-shellscript-per-instance, or x-shellscript-per-once can be added
to a multipart MIME userdata message as part of instance userdata.
These scripts will then be added to the appropriate per-boot,
per-instance, or per-once directory in /var/lib/cloud/scripts/
during processing of userdata.
|
|
|
|
|
|
The partner archive is now obsolete.
LP: #1959343
|
|
|
|
|
|
Cloud-init includes the capability to take the network-config from a
separate key. This removes the need to merge the network config in
the user-data and make it more transparent in some cases.
Reference:
https://github.com/canonical/cloud-init/blob/42b938e8ff4c50833ff7b8f5acc1d9ab3f43ab18/cloudinit/sources/DataSourceOVF.py#L557
|
|
Adds a new module to allow setting keyboard layout,
for use-cases in which cloud-init is used to configure
OS images meant for physical computers instead
of the cloud.
This initial release only implements support
for Linux distributions that allow layout to be
set through systemd's localectl.
LP: #1951593
|
|
cloud-init currently makes calls to ubuntu_advantage without assume-yes.
some ua enable commands, such as ua enable fips, have prompts. In an
automated environment, calling ua enable without --assume-yes will
result in errors and not applying the change. This sets --assume-yes by
default for all enable commands. This capability was added two years ago
in ua commit 576e605ceb5f so should be safe for use in all systems at
this time.
LP: #1954842
|
|
|
|
|
|
|
|
The main idea is to introduce a second module that takes care of
writing files, but in the 'final' stage.
While the introduction of a second module would allow for choosing
the appropriate place withing the order of modules (and stages),
there is no addition top-level directive being added to the cloud
configuration schema. Instead, 'write-files' schema is being extended
to include a 'defer' attribute used only by the 'write-deffered-files'
modules.
The new module 'write-deferred-files' reuses as much as
possible of the 'write-files' functionality.
|
|
|
|
There is no reason for the ISO missing this functionality.
As discussed in https://github.com/canonical/cloud-init/pull/947/files#r707338489
|
|
Allow comments in runcmd and report failed commands correctly
A `runcmd` script may fail to parse properly, but does not mark
`runcmd` as failed when that occurs. Additionally `shellify()` fails
to correctly parse scripts that contain a comment line.
Rectify both issues and add unit tests to verify correct behavior.
LP: #1853146
|
|
|
|
|
|
Add retries to DatasourceGCE when connecting to GCE.
Sometimes when the trying to fetch the metadata,
cloud-init fails and the fallback datasource NoCloud is used which is
not expected. Add retries to ensure loading of the data source.
|
|
Add IPv6 localhost (::1) entry. See:
https://salsa.debian.org/installer-team/netcfg/-/blob/1767c9264e04652b9150ffc7b25568e4ea6b2bdd/netcfg.h#L42
https://salsa.debian.org/md/netbase/-/blob/9de8afcad482418cc4956dc09bbf6a2e8624d574/debian/netbase.postinst#L8
Also remove ip6-localnet, ip6-mcastprefix, and ip6-allhosts. See:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499800
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688090
LP: #1943798
|
|
|
|
openEuler Homepage: https://www.openeuler.org/en/
|
|
The distribution class has a field that specifies the location of
the system hosts file and this can be overridden in subclasses.
While the field is correctly used in distro.update_etc_hosts(), the
update_etc_hosts module does not use it and just assumes '/etc/hosts'
This fixes the module to use the distribution-specific variable.
|
|
https://www.cloudlinux.com/
|
|
|
|
|
|
This patch finally introduces the Cloud-Init Datasource for VMware
GuestInfo as a part of cloud-init proper. This datasource has existed
since 2018, and rapidly became the de facto datasource for developers
working with Packer, Terraform, for projects like kube-image-builder,
and the de jure datasource for Photon OS.
The major change to the datasource from its previous incarnation is
the name. Now named DatasourceVMware, this new version of the
datasource will allow multiple transport types in addition to
GuestInfo keys.
This datasource includes several unique features developed to address
real-world situations:
* Support for reading any key (metadata, userdata, vendordata) both
from the guestinfo table when running on a VM in vSphere as well as
from an environment variable when running inside of a container,
useful for rapid dev/test.
* Allows booting with DHCP while still providing full participation
in Cloud-Init instance data and Jinja queries. The netifaces library
provides the ability to inspect the network after it is online,
and the runtime network configuration is then merged into the
existing metadata and persisted to disk.
* Advertises the local_ipv4 and local_ipv6 addresses via guestinfo
as well. This is useful as Guest Tools is not always able to
identify what would be considered the local address.
The primary author and current steward of this datasource spoke at
Cloud-Init Con 2020 where there was interest in contributing this datasource
to the Cloud-Init codebase.
The datasource currently lives in its own GitHub repository at
https://github.com/vmware/cloud-init-vmware-guestinfo. Once the datasource
is merged into Cloud-Init, the old repository will be deprecated.
|
|
Implement missing device_aliases feature
The device_aliases key has been documented as part of disk_setup for
years, however the feature was never implemented. This implements the
feature as documented allowing usercfg (rather than dsconfig) to create
a mapping of device names.
This is not to be confused with disk_aliases, a very similar map but
existing solely for use by datasources.
LP: #1867532
|
|
|
|
The name "DigitalOcean" doesn't have a space in it; it's a single
compound word written in Pascal case (upper camel case).
|
|
- small document update for ReportEventStack explaining post_files
parameter
- small unit test for test_reporting demonstrating the close of an
event with optional post_files list
|
|
Rocky Linux is a RHEL-compatible distribution so all changes that have
been made should be trivial.
|
|
|
|
Changed year 2012 into 2032
|
|
AlmaLinux OS is RHEL-compatible so all the changes needed are trivial.
|
|
|
|
Move chef_license from TPL_PATH_KEYS to TPL_KEYS as the chef license
setting is not a path but must be added to the client config template.
Fixes file or folder not found exception raised from ensure_dirs.
|
|
The blkdev command is fragile re-reading partition tables if a
partition is mounted. This change instead uses the partprobe if
it is available.
LP: #1920939
|
|
This PR adds in support so that cloud-init can run on instances
deployed on Vultr cloud. This was originally brought up in #628.
Co-authored-by: Eric Benner <ebenner@vultr.com>
|
|
When bringing up DHCP-provided static routes, we check for "0.0.0.0/0"
to indicate an unspecified gateway. However, when parsing the static
route in `parse_static_routes`, the gateway is never specified with
a net length, so the "/0" will never happen.
This change updates the gateway check to check only for "0.0.0.0".
|
|
|
|
key is a property of source1 and not sources
|
|
The implementation in existing datasources means that vendordata_raw is
not "raw" as it ideally would be. Instead, actual values may include
bytes, string or list. If the value was a list, then the attempt to
persist that data to a file in '_store_rawdata' would raise a
TypeError.
The change is to encode with util.json_dumps (which is safe for
binary data) before writing.
|
|
hostname (inetutils) isn't installed per default on arch, so switch
to hostnamectl which is installed per default (systemd).
|
|
It is distro dependent whether hostname or fqdn is used
|
|
Signed-off-by: Jordi Massaguer Pla <jmassaguerpla@suse.de>
|
|
|
|
|
|
Two shell code blocks are not marked as such, confusing rst to consider
them as yaml. Be explicit about their syntax, and use $ prompt to match
elsewhere in the docs.
/home/travis/build/canonical/cloud-init/doc/rtd/topics/format.rst:28: WARNING: Could not lex literal_block as "yaml". Highlighting skipped.
/home/travis/build/canonical/cloud-init/doc/rtd/topics/format.rst:52: WARNING: Could not lex literal_block as "yaml". Highlighting skipped.
Signed-off-by: Dan Kenigsberg <danken@redhat.com>
|
|
|
