From 134a6f5b15078ead8f6cb7d4e463c6f4d8488024 Mon Sep 17 00:00:00 2001 From: Scott Moser Date: Tue, 8 Nov 2016 19:14:20 -0500 Subject: doc: Add documentation on stages of boot. This adds long overdue documentation on stages that cloud-init runs during boot. --- doc/rtd/index.rst | 1 + doc/rtd/topics/boot.rst | 128 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 129 insertions(+) create mode 100644 doc/rtd/topics/boot.rst diff --git a/doc/rtd/index.rst b/doc/rtd/index.rst index 90defade..3caf33f3 100644 --- a/doc/rtd/index.rst +++ b/doc/rtd/index.rst @@ -33,6 +33,7 @@ initialization of a cloud instance. topics/format.rst topics/dir_layout.rst topics/examples.rst + topics/boot.rst topics/datasources.rst topics/logging.rst topics/modules.rst diff --git a/doc/rtd/topics/boot.rst b/doc/rtd/topics/boot.rst new file mode 100644 index 00000000..9d42336c --- /dev/null +++ b/doc/rtd/topics/boot.rst @@ -0,0 +1,128 @@ +*********** +Boot Stages +*********** +In order to be able to provide the functionality that it does, cloud-init +must be integrated into the boot in fairly controlled way. + +There are 5 stages. + +1. **Generator** +2. **Local** +3. **Network** +4. **Config** +5. **Final** + +Generator +========= +When booting under systemd, a +`generator `_ +will run that determines if cloud-init.target should be included in the +boot goals. By default, this generator will enable cloud-init. It will +not enable cloud-init if either: + + * A file exists: ``/etc/cloud/cloud-init.disabled`` + * The kernel command line as fond in /proc/cmdline contains ``cloud-init=disabled``. + When running in a container, the kernel command line is not honored, but + cloud-init will read an environment variable named ``KERNEL_CMDLINE`` in + its place. + +This mechanism for disabling at runtime currently only exists in systemd. + +Local +===== + * **systemd service**: ``cloud-init-local.service`` + * **runs**: As soon as possible with / mounted read-write. + * **blocks**: as much of boot as possible, *must* block network bringup. + * **modules**: none + +The purpose of the local stage is: + * locate "local" data sources. + * apply networking configuration to the system (including "Fallback") + +In most cases, this stage does not do much more than that. It finds the +datasource and determines the network configuration to be used. That +network configuration can come from: + + * the datasource + * fallback: Cloud-init's fallback networking consists of rendering the + equivalent to "dhcp on eth0", which was historically the most popular + mechanism for network configuration of a guest. + * none. network configuration can be disabled entirely with + config like the following in /etc/cloud/cloud.cfg: + '``network: {config: disabled}``'. + +If this is an instance's first boot, then the selected network configuration +is rendered. This includes clearing of all previous (stale) configuration +including persistent device naming with old mac addresses. + +This stage must block network bring-up or any stale configuration might +already have been applied. That could have negative effects such as DCHP +hooks or broadcast of an old hostname. It would also put the system in +an odd state to recover from as it may then have to restart network +devices. + +Cloud-init then exits and expects for the continued boot of the operating +system to bring network configuration up as configured. + +**Note**: In the past, local data sources have been only those that were +available without network (such as 'ConfigDrive'). However, as seen in +the recent additions to the DigitalOcean datasource, even data sources +that require a network can operate at this stage. + +Network +======= + * **systemd service**: ``cloud-init.service`` + * **runs**: After local stage and configured networking is up. + * **blocks**: As much of remaining boot as possible. + * **modules**: ``init_modules`` + +This stage requires all configured networking to be online, as it will fully +process any user-data that is found. Here, processing means: + + * retrive any ``#include`` or ``#include-once`` (recursively) including http + * uncompress any compressed content + * run any part-handler found. + +This stage runs the ``disk_setup`` and ``mounts`` modules which may partition +and format disks and configure mount points (such as in /etc/fstab). +Those modules cannot run earlier as they may receive configuration input +from sources only available via network. For example, a user may have +provided user-data in a network resource that describes how local mounts +should be done. + +On some clouds such as Azure, this stage will create filesystems to be +mounted, including ones that have stale (previous instance) references in +/etc/fstab. As such, entries /etc/fstab other than those necessary for +cloud-init to run should not be done until after this stage. + +A part-handler will run at this stage, as will boothooks including +cloud-config ``bootcmd``. The user of this functionality has to be aware +that the system is in the process of booting when their code runs. + +Config +====== + * **systemd service**: ``cloud-config.service`` + * **runs**: After network stage. + * **blocks**: None. + * **modules**: ``config_modules`` + +This stage runs config modules only. Modules that do not really have an +effect on other stages of boot are run here. + + +Final +===== + * **systemd service**: ``cloud-final.service`` + * **runs**: As final part of boot (traditional "rc.local") + * **blocks**: None. + * **modules**: ``final_modules`` + +This stage runs as late in boot as possible. Any scripts that a user is +accustomed to running after logging into a system should run correctly here. +Things that run here include + + * package installations + * configuration management plugins (puppet, chef, salt-minion) + * user-scripts (including ``runcmd``). + +.. vi: textwidth=78 -- cgit v1.2.3