#cloud-config
# Update apt database on first boot
# (ie run apt-get update)
#
# Default: true
#
apt_update: false

# Upgrade the instance on first boot
# (ie run apt-get upgrade)
#
# Default: false
#
apt_upgrade: true

# Add apt repositories
#
# Default: auto select based on cloud metadata
#  in ec2, the default is <region>.archive.ubuntu.com
apt_mirror: http://us.archive.ubuntu.com/ubuntu/

# Preserve existing /etc/apt/sources.list
# Default: overwrite sources_list with mirror.  If this is true
# then apt_mirror above will have no effect
apt_preserve_sources_list: true

apt_sources:
 - source: "deb http://ppa.launchpad.net/byobu/ppa/ubuntu karmic main"
   keyid: F430BBA5 # GPG key ID published on a key server
   filename: byobu-ppa.list

 # PPA shortcut:
 #  * Setup correct apt sources.list line
 #  * Import the signing key from LP
 #
 #  See https://help.launchpad.net/Packaging/PPA for more information
 #  this requires 'add-apt-repository'
 - source: "ppa:smoser/ppa"    # Quote the string

 # Custom apt repository:
 #  * all that is required is 'source'
 #  * Creates a file in /etc/apt/sources.list.d/ for the sources list entry
 #  * [optional] Import the apt signing key from the keyserver 
 #  * Defaults:
 #    + keyserver: keyserver.ubuntu.com
 #    + filename: cloud_config_sources.list
 #
 #    See sources.list man page for more information about the format
 - source: deb http://archive.ubuntu.com/ubuntu karmic-backports main universe multiverse restricted

 # sources can use $MIRROR and $RELEASE and they will be replaced
 # with the local mirror for this cloud, and the running release
 # the entry below would be possibly turned into:
 # - source: deb http://us-east-1.ec2.archive.ubuntu.com/ubuntu natty multiverse
 - source: deb $MIRROR $RELEASE multiverse

 # this would have the same end effect as 'ppa:byobu/ppa'
 - source: "deb http://ppa.launchpad.net/byobu/ppa/ubuntu karmic main"
   keyid: F430BBA5 # GPG key ID published on a key server
   filename: byobu-ppa.list

 # Custom apt repository:
 #  * The apt signing key can also be specified
 #    by providing a pgp public key block
 #  * Providing the PBG key here is the most robust method for
 #    specifying a key, as it removes dependency on a remote key server

 - source: deb http://ppa.launchpad.net/alestic/ppa/ubuntu karmic main 
   key: | # The value needs to start with -----BEGIN PGP PUBLIC KEY BLOCK-----
      -----BEGIN PGP PUBLIC KEY BLOCK-----
      Version: SKS 1.0.10

      mI0ESpA3UQEEALdZKVIMq0j6qWAXAyxSlF63SvPVIgxHPb9Nk0DZUixn+akqytxG4zKCONz6
      qLjoBBfHnynyVLfT4ihg9an1PqxRnTO+JKQxl8NgKGz6Pon569GtAOdWNKw15XKinJTDLjnj
      9y96ljJqRcpV9t/WsIcdJPcKFR5voHTEoABE2aEXABEBAAG0GUxhdW5jaHBhZCBQUEEgZm9y
      IEFsZXN0aWOItgQTAQIAIAUCSpA3UQIbAwYLCQgHAwIEFQIIAwQWAgMBAh4BAheAAAoJEA7H
      5Qi+CcVxWZ8D/1MyYvfj3FJPZUm2Yo1zZsQ657vHI9+pPouqflWOayRR9jbiyUFIn0VdQBrP
      t0FwvnOFArUovUWoKAEdqR8hPy3M3APUZjl5K4cMZR/xaMQeQRZ5CHpS4DBKURKAHC0ltS5o
      uBJKQOZm5iltJp15cgyIkBkGe8Mx18VFyVglAZey
      =Y2oI
      -----END PGP PUBLIC KEY BLOCK-----

# Install additional packages on first boot
#
# Default: none
#
# if packages are specified, this apt_update will be set to true
#
packages:
 - pwgen
 - pastebinit

# set up mount points
# 'mounts' contains a list of lists
#  the inner list are entries for an /etc/fstab line
#  ie : [ fs_spec, fs_file, fs_vfstype, fs_mntops, fs-freq, fs_passno ]
#
# default:
# mounts:
#  - [ ephemeral0, /mnt ]
#  - [ swap, none, swap, sw, 0, 0 ]
#
# in order to remove a previously listed mount (ie, one from defaults)
# list only the fs_spec.  For example, to override the default, of
# mounting swap:
# - [ swap ]
# or
# - [ swap, null ]
#
# - if a device does not exist at the time, an entry will still be
#   written to /etc/fstab.
# - '/dev' can be ommitted for device names that begin with: xvd, sd, hd, vd
# - if an entry does not have all 6 fields, they will be filled in
#   from the following: [ None, None, "auto", "defaults,nobootwait", "0", "2" ]
#
# Note, that you should set 'nobootwait' (see man fstab) for volumes that may
# not be attached at instance boot (or reboot)
#
mounts:
 - [ ephemeral0, /mnt, auto, "defaults,noexec" ]
 - [ sdc, /opt/data ]
 - [ xvdh, /opt/data, "auto", "defaults,nobootwait", "0", "0" ]
 - [ dd, /dev/zero ]

# add each entry to ~/.ssh/authorized_keys for the configured user
ssh_authorized_keys:
  - ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAGEA3FSyQwBI6Z+nCSjUUk8EEAnnkhXlukKoUPND/RRClWz2s5TCzIkd3Ou5+Cyz71X0XmazM3l5WgeErvtIwQMyT1KjNoMhoJMrJnWqQPOt5Q8zWd9qG7PBl9+eiH5qV7NZ mykey@host
  - ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA3I7VUf2l5gSn5uavROsc5HRDpZdQueUq5ozemNSj8T7enqKHOEaFoU2VoPgGEWC9RyzSQVeyD6s7APMcE82EtmW4skVEgEGSbDc1pvxzxtchBj78hJP6Cf5TCMFSXw+Fz5rF1dR23QDbN1mkHs7adr8GW4kSWqU7Q7NDwfIrJJtO7Hi42GyXtvEONHbiRPOe8stqUly7MvUoN+5kfjBM8Qqpfl2+FNhTYWpMfYdPUnE7u536WqzFmsaqJctz3gBxH9Ex7dFtrxR4qiqEr9Qtlu3xGn7Bw07/+i1D+ey3ONkZLN+LQ714cgj8fRS4Hj29SCmXp5Kt5/82cD/VN3NtHw== smoser@brickies

# Send pre-generated ssh private keys to the server
# If these are present, they will be written to /etc/ssh and
# new random keys will not be generated
ssh_keys:
  rsa_private: |
    -----BEGIN RSA PRIVATE KEY-----
    MIIBxwIBAAJhAKD0YSHy73nUgysO13XsJmd4fHiFyQ+00R7VVu2iV9Qcon2LZS/x
    1cydPZ4pQpfjEha6WxZ6o8ci/Ea/w0n+0HGPwaxlEG2Z9inNtj3pgFrYcRztfECb
    1j6HCibZbAzYtwIBIwJgO8h72WjcmvcpZ8OvHSvTwAguO2TkR6mPgHsgSaKy6GJo
    PUJnaZRWuba/HX0KGyhz19nPzLpzG5f0fYahlMJAyc13FV7K6kMBPXTRR6FxgHEg
    L0MPC7cdqAwOVNcPY6A7AjEA1bNaIjOzFN2sfZX0j7OMhQuc4zP7r80zaGc5oy6W
    p58hRAncFKEvnEq2CeL3vtuZAjEAwNBHpbNsBYTRPCHM7rZuG/iBtwp8Rxhc9I5w
    ixvzMgi+HpGLWzUIBS+P/XhekIjPAjA285rVmEP+DR255Ls65QbgYhJmTzIXQ2T9
    luLvcmFBC6l35Uc4gTgg4ALsmXLn71MCMGMpSWspEvuGInayTCL+vEjmNBT+FAdO
    W7D4zCpI43jRS9U06JVOeSc9CDk2lwiA3wIwCTB/6uc8Cq85D9YqpM10FuHjKpnP
    REPPOyrAspdeOAV+6VKRavstea7+2DZmSUgE
    -----END RSA PRIVATE KEY-----

  rsa_public: ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAGEAoPRhIfLvedSDKw7XdewmZ3h8eIXJD7TRHtVW7aJX1ByifYtlL/HVzJ09nilCl+MSFrpbFnqjxyL8Rr/DSf7QcY/BrGUQbZn2Kc22PemAWthxHO18QJvWPocKJtlsDNi3 smoser@localhost

  dsa_private: |
    -----BEGIN DSA PRIVATE KEY-----
    MIIBuwIBAAKBgQDP2HLu7pTExL89USyM0264RCyWX/CMLmukxX0Jdbm29ax8FBJT
    pLrO8TIXVY5rPAJm1dTHnpuyJhOvU9G7M8tPUABtzSJh4GVSHlwaCfycwcpLv9TX
    DgWIpSj+6EiHCyaRlB1/CBp9RiaB+10QcFbm+lapuET+/Au6vSDp9IRtlQIVAIMR
    8KucvUYbOEI+yv+5LW9u3z/BAoGBAI0q6JP+JvJmwZFaeCMMVxXUbqiSko/P1lsa
    LNNBHZ5/8MOUIm8rB2FC6ziidfueJpqTMqeQmSAlEBCwnwreUnGfRrKoJpyPNENY
    d15MG6N5J+z81sEcHFeprryZ+D3Ge9VjPq3Tf3NhKKwCDQ0240aPezbnjPeFm4mH
    bYxxcZ9GAoGAXmLIFSQgiAPu459rCKxT46tHJtM0QfnNiEnQLbFluefZ/yiI4DI3
    8UzTCOXLhUA7ybmZha+D/csj15Y9/BNFuO7unzVhikCQV9DTeXX46pG4s1o23JKC
    /QaYWNMZ7kTRv+wWow9MhGiVdML4ZN4XnifuO5krqAybngIy66PMEoQCFEIsKKWv
    99iziAH0KBMVbxy03Trz
    -----END DSA PRIVATE KEY-----

  dsa_public: ssh-dss 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 smoser@localhost


# remove access to the ec2 metadata service early in boot via null route
#  the null route can be removed (by root) with:
#    route del -host 169.254.169.254 reject
# default: false (service available)
disable_ec2_metadata: true

# run commands
# default: none
# runcmd contains a list of either lists or a string
# each item will be executed in order at rc.local like level with
# output to the console
# - if the item is a list, the items will be properly executed as if
#   passed to execve(3) (with the first arg as the command).
# - if the item is a string, it will be simply written to the file and
#   will be interpreted by 'sh'
#
# Note, that the list has to be proper yaml, so you have to escape
# any characters yaml would eat (':' can be problematic)
runcmd:
 - [ ls, -l, / ]
 - [ sh, -xc, "echo $(date) ': hello world!'" ]
 - [ sh, -c, echo "=========hello world'=========" ]
 - ls -l /root
 - [ wget, "http://slashdot.org", -O, /tmp/index.html ]


# cloud_config_modules:
# default:
# cloud_config_modules:
# - mounts
# - ssh
# - apt-update-upgrade
# - puppet
# - updates-check
# - disable-ec2-metadata
# - runcmd
#
# This is an array of arrays or strings.
# if item is a string, then it is read as a module name
# if the item is an array it is of the form:
#   name, frequency, arguments
# where 'frequency' is one of:
#   once-per-instance
#   always
# a python file in the CloudConfig/ module directory named 
# cc_<name>.py
# example:
cloud_config_modules:
 - mounts
 - ssh-import-id
 - ssh
 - grub-dpkg
 - [ apt-update-upgrade, always ]
 - puppet
 - updates-check
 - disable-ec2-metadata
 - runcmd
 - byobu

# ssh_import_id: [ user1, user2 ]
# ssh_import_id will feed the list in that variable to
#  ssh-import-id, so that public keys stored in launchpad
#  can easily be imported into the configured user
# This can be a single string ('smoser') or a list ([smoser, kirkland])
ssh_import_id: [smoser]

# Provide debconf answers
#
# See debconf-set-selections man page.
#
# Default: none
# 
debconf_selections: |     # Need to perserve newlines
        # Force debconf priority to critical.
        debconf debconf/priority select critical

        # Override default frontend to readline, but allow user to select.
        debconf debconf/frontend select readline
        debconf debconf/frontend seen false

# manage byobu defaults
# byobu_by_default: ('user'|'system')
#   'user' will set byobu 'launch-by-default' for the default user
#   'system' will enable launch-by-default for for all users
byobu_by_default: system

# disable ssh access as root.
# if you want to be able to ssh in to the system as the root user
# rather than as the 'ubuntu' user, then you must set this to false
# default: true
disable_root: false

# set the locale to a given locale
# default: en_US.UTF-8
locale: en_US.UTF-8

# add entries to rsyslog configuration
# The first occurance of a given filename will truncate. 
# subsequent entries will append.
# if value is a scalar, its content is assumed to be 'content', and the
# default filename is used.
# if filename is not provided, it will default to 'rsylog_filename'
# if filename does not start with a '/', it will be put in 'rsyslog_dir'
# rsyslog_dir default: /etc/rsyslog.d
# rsyslog_filename default: 20-cloud-config.conf
rsyslog:
 - ':syslogtag, isequal, "[CLOUDINIT]" /var/log/cloud-foo.log'
 - content: "*.*   @@192.0.2.1:10514"
 - filename: 01-examplecom.conf
   content: |
   *.*   @@syslogd.example.com