vyos-documentation.git/docs/configuration, branch T9354

T9354: document "reconnect interface" operational command

2026-09-25T19:15:00+00:00

PPPoE, SSTP client and WWAN interfaces can now be restarted with a single command which survives the loss of the CLI session, so it can be issued over the very interface being reconnected. The WWAN page gained the connect and disconnect commands as well - they have always been available there, but were only documented for PPPoE and SSTP. The command is also exposed by the HTTP API through a dedicated endpoint, which replaces the "reset connection" path that was previously used for this.

docs: T9157: document firewall fib-type match (#2186)

2026-09-25T13:37:27+00:00

* docs: T9157: document firewall fib-type match Companion doc entry for vyos/vyos-1x#5372, which adds "fib-type" as a source/destination match option (nftables' fib daddr/saddr type expression) for forward/input/output/name rule sets, ipv4 and ipv6. * docs: T9157: update fib match docs for fib-type -> fib type rename Companion vyos-1x PR #5372 restructured the "fib-type" leaf into a "fib" node with a "type" child (following feedback from l0crian1 and sarthurdev to reserve the "fib" namespace for a possible future lookup/match concatenation feature, tracked separately under T5119). Update the CLI paths and examples here to match, and fix "prohibited" to "prohibit" to match nftables' actual fib_addrtype token. * docs: T9157: add prerouting raw fib type reference, fix backtick style CodeRabbit feedback on #2186: - the prose showed a "prerouting raw" example but the command reference only listed forward/input/output/name filter forms, even though fib.xml.i is also included from common-rule-ipv{4,6}-raw.xml.i for that hook. Add the missing source/destination cfgcmd entries. - MyST pages use single backticks for inline code, not double (that's for embedded RST); fix the fib type prose accordingly. * docs: T9157: update fib docs for rule-level lookup/match split Companion vyos-1x PR #5372 moved "fib" from a leaf nested under destination/source to a rule-level node with separate "lookup" (source-address/destination-address) and "match route-type" children, per l0crian1's review feedback - reserving room for mark/iif/oif lookup keys and oif/oifname match results later (tracked under T5119) without ever renaming what ships now. Update the CLI paths and examples here to match.

firewall/groups: document include option and remote-group interval (#2241)

2026-09-15T09:59:52+00:00

* firewall/groups: document include option and remote-group interval These CLI nodes existed in the XML definitions but were missing from the docs entirely, per docs.vyos.io/en/1.5/coverage.html: - include: lets one group nest another group of the same type (address-group, ipv6-address-group, network-group, ipv6-network-group, mac-group, port-group, interface-group) - remote-group interval: overrides the global resolver-interval on a per-group basis * firewall/groups: clarify remote-group interval range applies post-conversion CodeRabbit review on #2241 noted the range (60-2419200s) wasn't clearly tied to suffixed values. Confirmed in vyos-1x conf_mode/firewall.py: human_to_seconds() converts the value first, then the range check runs on the converted seconds -- so e.g. "30s" is rejected same as "30".

docs: T8045: document dont-query (#2211)

2026-09-11T14:52:08+00:00

* docs: T8045: document dont-query --------- Co-authored-by: Daniil Baturin

docs: Update sFlow page to VyOS 1.5 standards (#2237)

2026-09-11T13:10:55+00:00

* docs: Update sFlow page to VyOS 1.5 standards

data-ciphers-fallback must required for s2s (#2235)

2026-09-11T12:42:09+00:00

docs: Update Conntrack page to VyOS 1.5 standards (#2232)

2026-09-11T12:38:51+00:00

* docs: Update Conntrack page to VyOS 1.5 standards * Update conntrack.md * Apply suggestion from @dmbaturin * Apply suggestion from @dmbaturin * Apply suggestion from @dmbaturin * Apply suggestion from @dmbaturin --------- Co-authored-by: Daniil Baturin

docs: Update Acceleration page to VyOS 1.5 standards (#2231)

2026-09-11T12:32:17+00:00

* docs: Update Acceleration page to VyOS 1.5 standards * Apply batched suggestions from code review Co-authored-by: Daniil Baturin * Update acceleration.md --------- Co-authored-by: Daniil Baturin

Merge pull request #2210 from cqjjjzr/T9166-ipv6-ha

2026-09-11T12:20:31+00:00

docs: T9166: document IPv6 for HA peer link

firewall: T9076: document remote-group update interval (#2148)

2026-09-11T11:42:42+00:00

* firewall: T9076: document remote-group update interval Document the new 'set firewall group remote-group interval' command: per-group update interval from 60 seconds to 4 weeks, given as plain seconds or with s/m/h/d/w suffixes (e.g. 4h), falling back to the global resolver-interval when unset. Co-Authored-By: Claude Fable 5 * firewall: T9076: note URL quoting and log redaction for remote-group Warn that remote-group URLs with query strings must be quoted (unquoted '&' silently truncates the value; literal '?' may need Ctrl-V, see T9077) and that vyos-domain-resolver logs redact the query string on download failures (T8829). Co-Authored-By: Claude Fable 5 * firewall: T9076: note that remote-group interval suffixes may be combined Address review feedback: document that s/m/h/d/w units can be stacked (e.g. 1h30m), matching human_to_seconds and the CLI regex. --------- Co-authored-by: Claude Fable 5