ip-commands: add "none" on code-block directives

1 files changed, 22 insertions, 41 deletions

diff --git a/docs/routing/ip-commands.rst b/docs/routing/ip-commands.rst
index fbfe2d24..eba4fd90 100644
--- a/docs/routing/ip-commands.rst
+++ b/docs/routing/ip-commands.rst
@@ -1,9 +1,8 @@
 .. _ip-commands:
 
-***********
+###########
 IP commands
-***********
-
+###########
 
 IPv4
 ====
@@ -11,18 +10,15 @@ IPv4
 System configuration commands
 -----------------------------
 
-
 .. cfgcmd:: set system ip disable-forwarding
 
    Use this command to disable IPv4 forwarding on all interfaces.
 
-
 .. cfgcmd:: set system ip arp table-size <number>
 
    Use this command to define the maximum number of entries to keep in
    the ARP cache (1024, 2048, 4096, 8192, 16384, 32768).
 
-
 .. cfgcmd:: set system ip multipath layer4-hashing
 
    Use this command to use Layer 4 information for IPv4 ECMP hashing.
@@ -31,13 +27,12 @@ System configuration commands
 Operational commands
 --------------------
 
-
 show commands
 ^^^^^^^^^^^^^
 
 See below the different parameters available for the IPv4 **show** command:
 
-.. code-block::
+.. code-block:: none
 
    vyos@vyos:~$ show ip
    Possible completions:
@@ -62,23 +57,22 @@ See below the different parameters available for the IPv4 **show** command:
      protocol      Show IP route-maps per protocol
      rip           Show Routing Information Protocol (RIP) information
      route         Show IP routes
-   
+
 
 reset commands
 ^^^^^^^^^^^^^^
 
 And the different IPv4 **reset** commands available:
 
-.. code-block::
+.. code-block:: none
 
-   vyos@vyos:~$ reset ip 
+   vyos@vyos:~$ reset ip
    Possible completions:
      arp           Reset Address Resolution Protocol (ARP) cache
      bgp           Clear Border Gateway Protocol (BGP) statistics or status
      igmp          IGMP clear commands
      multicast     IP multicast routing table
      route         Reset IP route
-   
 
 IPv6
 ====
@@ -91,61 +85,52 @@ System configuration commands
    Use this command to disable assignment of IPv6 addresses on all
    interfaces.
 
-
 .. cfgcmd:: set system ipv6 disable-forwarding
 
    Use this command to disable IPv6 forwarding on all interfaces.
 
-
 .. cfgcmd:: set system ipv6 neighbor table-size <number>
 
    Use this command to define the maximum number of entries to keep in
    the Neighbor cache (1024, 2048, 4096, 8192, 16384, 32768).
 
-
 .. cfgcmd:: set system ipv6 strict-dad
 
    Use this command to disable IPv6 operation on interface when
    Duplicate Address Detection fails on Link-Local address.
 
-
 .. cfgcmd:: set system ipv6 multipath layer4-hashing
 
    Use this command to user Layer 4 information for ECMP hashing.
 
 
-
 Operational commands
 --------------------
 
 Show commands
 ^^^^^^^^^^^^^
 
-
 .. opcmd:: show ipv6 neighbors
 
    Use this command to show IPv6 Neighbor Discovery Protocol information.
 
-
 .. opcmd:: show ipv6 groups
 
    Use this command to show IPv6 multicast group membership.
 
-
 .. opcmd:: show ipv6 forwarding
-  
+
    Use this command to show IPv6 forwarding status.
 
 .. opcmd:: show ipv6 route
 
    Use this command to show IPv6 routes.
 
-
    Check the many parameters available for the `show ipv6 route` command:
 
    .. code-block:: none
 
-      vyos@vyos:~$ show ipv6 route 
+      vyos@vyos:~$ show ipv6 route
       Possible completions:
         <Enter>       Execute the current command
         <X:X::X:X>    Show IPv6 routes of given address or prefix
@@ -162,7 +147,7 @@ Show commands
         summary       Show IPv6 routes summary
         table         Show IP routes in policy table
         vrf           Show IPv6 routes in VRF
-      
+
 
 .. opcmd:: show ipv6 prefix-list
 
@@ -172,13 +157,13 @@ Show commands
 
    .. code-block:: none
 
-      vyos@vyos:~$ show ipv6 prefix-list 
+      vyos@vyos:~$ show ipv6 prefix-list
       Possible completions:
         <Enter>       Execute the current command
         <WORD>        Show specified IPv6 prefix-list
         detail        Show detail of IPv6 prefix-lists
         summary       Show summary of IPv6 prefix-lists
-      
+
 .. opcmd:: show ipv6 access-list
 
    Use this command to show all IPv6 access lists
@@ -187,12 +172,10 @@ Show commands
 
    .. code-block:: none
 
-      vyos@vyos:~$ show ipv6 access-list 
+      vyos@vyos:~$ show ipv6 access-list
       Possible completions:
         <Enter>       Execute the current command
         <text>        Show specified IPv6 access-list
-      
-
 
 .. opcmd:: show ipv6 bgp
 
@@ -203,8 +186,8 @@ Show commands
    information:
 
    .. code-block:: none
-   
-      vyos@vyos:~$ show ipv6 bgp 
+
+      vyos@vyos:~$ show ipv6 bgp
       Possible completions:
         <Enter>       Execute the current command
         <X:X::X:X>    Show BGP information for given address or prefix
@@ -221,7 +204,7 @@ Show commands
         regexp        Show routes matching the AS path regular expression
         route-map     Show BGP routes matching the specified route map
         summary       Show summary of BGP neighbor status
-      
+
 
 .. opcmd:: show ipv6 ospfv3
 
@@ -229,10 +212,10 @@ Show commands
 
    You can get more specific OSPFv3 information by using the parameters
    shown below:
-   
-   .. code-block:: 
-   
-      vyos@vyos:~$ show ipv6 ospfv3 
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show ipv6 ospfv3
       Possible completions:
         <Enter>       Execute the current command
         area          Show OSPFv3 spf-tree information
@@ -244,7 +227,7 @@ Show commands
         neighbor      Show OSPFv3 neighbor information
         redistribute  Show OSPFv3 redistribute External information
         route         Show OSPFv3 routing table information
-      
+
 .. opcmd:: show ipv6 ripng
 
    Use this command to get information about the RIPNG protocol
@@ -254,7 +237,6 @@ Show commands
    Use this command to show the status of the RIPNG protocol
 
 
-
 Reset commands
 ^^^^^^^^^^^^^^
 
@@ -266,12 +248,11 @@ Reset commands
 
 .. opcmd:: reset ipv6 neighbors <address | interface>
 
-   Use this command to reset IPv6 Neighbor Discovery Protocol cache for 
+   Use this command to reset IPv6 Neighbor Discovery Protocol cache for
    an address or interface.
 
 .. opcmd:: reset ipv6 route cache
 
    Use this command to flush the kernel IPv6 route cache.
-   An address can be added to flush it only for that route. 
-
+   An address can be added to flush it only for that route.