summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAlex W <embezzle.dev@proton.me>2024-05-04 21:35:16 +0100
committerAlex W <embezzle.dev@proton.me>2024-05-04 21:35:16 +0100
commitf2556e12287dd36118267fb2d7bc36332d973dff (patch)
treed5da66f0d45858692e1850f6059f0fd136cec796
parentcd4afb0e822602d7d586b322a29521b0c0230807 (diff)
downloadvyos-documentation-f2556e12287dd36118267fb2d7bc36332d973dff.tar.gz
vyos-documentation-f2556e12287dd36118267fb2d7bc36332d973dff.zip
traffic-policy: Corrected spelling mistakes
-rw-r--r--docs/configuration/trafficpolicy/index.rst10
1 files changed, 5 insertions, 5 deletions
diff --git a/docs/configuration/trafficpolicy/index.rst b/docs/configuration/trafficpolicy/index.rst
index ed63b21f..f99c2a66 100644
--- a/docs/configuration/trafficpolicy/index.rst
+++ b/docs/configuration/trafficpolicy/index.rst
@@ -368,7 +368,7 @@ are to be sent, they could get dropped when trying to get enqueued at
the tail. This can happen if the queue has still not been able to
release enough packets from its head.
-This is the policy that requieres the lowest resources for the same
+This is the policy that requires the lowest resources for the same
amount of traffic. But **very likely you do not need it as you cannot
get much from it. Sometimes it is used just to enable logging.**
@@ -504,7 +504,7 @@ and increase `interval` to something around 150 ms.
the number of sub-queues (default: 1024) into which packets are
classified.
-.. cfgcmd:: set qos policy fq-codel <policy name> interval <miliseconds>
+.. cfgcmd:: set qos policy fq-codel <policy name> interval <milliseconds>
Use this command to configure an fq-codel policy, set its name and
the time period used by the control loop of CoDel to detect when a
@@ -518,7 +518,7 @@ and increase `interval` to something around 150 ms.
define a hard limit on the real queue size. When this limit is
reached, new packets are dropped (default: 10240 packets).
-.. cfgcmd:: set qos policy fq-codel <policy-name> target <miliseconds>
+.. cfgcmd:: set qos policy fq-codel <policy-name> target <milliseconds>
Use this command to configure an fq-codel policy, set its name, and
define the acceptable minimum standing/persistent queue delay. This
@@ -710,7 +710,7 @@ continuously, packets from lower priority classes will only be
transmitted after traffic volume from higher priority classes decreases.
-.. note:: In Priority Queue we do not define clases with a meaningless
+.. note:: In Priority Queue we do not define classes with a meaningless
class ID number but with a class priority number (1-7). The lower the
number, the higher the priority.
@@ -912,7 +912,7 @@ In principle, values must be
Rate Control
------------
-| **Queueing discipline:** Tocken Bucket Filter.
+| **Queueing discipline:** Token Bucket Filter.
| **Applies to:** Outbound traffic.
Rate-Control is a classless policy that limits the packet flow to a set