docs: convert _include/interface-ipv6.txt MyST→RST (per RST-leftovers cleanup design)

1 files changed, 23 insertions, 34 deletions

diff --git a/docs/_include/interface-ipv6.txt b/docs/_include/interface-ipv6.txt
index 1d3b741b..0d938dd6 100644
--- a/docs/_include/interface-ipv6.txt
+++ b/docs/_include/interface-ipv6.txt
@@ -1,6 +1,4 @@
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
-
-::::
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 address autoconf
 
@@ -12,11 +10,12 @@
   its configuration parameters; routers respond to such a request with a router
   advertisement packet that contains Internet Layer configuration parameters.
 
-  :::{note}
-  This method automatically disables IPv6 traffic forwarding on the
+  .. note::
+
+     This method automatically disables IPv6 traffic forwarding on the
+
+     interface in question.
 
-  interface in question.
-  :::
   Example:
 
   .. code-block:: none
@@ -24,9 +23,7 @@
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address autoconf
 
 
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
-
-::::
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 address eui64 <prefix>
 
@@ -39,9 +36,7 @@
 
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address eui64 2001:db8:beef::/64
 
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
-
-::::
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 address no-default-link-local
 
@@ -53,9 +48,7 @@
 
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address no-default-link-local
 
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
-
-::::
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 disable-forwarding
 
@@ -68,9 +61,7 @@
 
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 disable-forwarding
 
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
-
-::::
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 adjust-mss <mss | clamp-mss-to-pmtu>
 
@@ -79,22 +70,22 @@
   a SYN packet. By setting the MSS value, you are telling the remote side
   unequivocally 'do not try to send me packets bigger than this value'.
 
-  :::{note}
-  This command was introduced in VyOS 1.4 - it was previously called:
+  .. note::
 
-  ``set firewall options interface <name> adjust-mss6 <value>``
-  :::
-  :::{hint}
-  MSS value = MTU - 40 (IPv6 header) - 20 (TCP header), resulting in
+     This command was introduced in VyOS 1.4 - it was previously called:
 
-  1432 bytes on a 1492 byte MTU.
-  :::
-  Instead of a numerical MSS value `clamp-mss-to-pmtu` can be used to
-  automatically set the proper value.
+     ``set firewall options interface <name> adjust-mss6 <value>``
+
+  .. hint::
+
+     MSS value = MTU - 40 (IPv6 header) - 20 (TCP header), resulting in
 
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
+     1432 bytes on a 1492 byte MTU.
 
-::::
+  Instead of a numerical MSS value ``clamp-mss-to-pmtu`` can be used to
+  automatically set the proper value.
+
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 accept-dad <1-3>
 
@@ -110,9 +101,7 @@
 
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 accept-dad 2
 
-::::{cfgcmd} set interfaces {{ var0 }} \<interface\> {{ var2 }} {{ var3 }}
-
-::::
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
 
   {{ var5 }} {{ var6 }} ipv6 dup-addr-detect-transmits <n>