rearange changelog, cli, contributing

6 files changed, 299 insertions, 0 deletions

diff --git a/docs/changelog/1.2.1.rst b/docs/changelog/1.2.1.rst
new file mode 100644
index 00000000..4f22dd0a
--- /dev/null
+++ b/docs/changelog/1.2.1.rst
@@ -0,0 +1,52 @@
+1.2.1
+=====
+
+VyOS 1.2.1 is a maintenance release made in April 2019.
+
+Resolved issues
+---------------
+
+* Package updates: kernel 4.19.32, open-vm-tools 10.3, latest Intel NIC drivers
+* :vytask:`T1326` The kernel now includes drivers for various USB serial
+  adapters, which allows people to add a serial console to a machine without
+  onboard RS232, or connect to something else from the router
+* The collection of network card firmware is now much more extensive
+* :vytask:`T1271` VRRP now correctly uses a virtual rather than physical MAC
+  addresses in the RFC-compliant mode
+* :vytask:`T1330` DHCP WPAD URL option works correctly again
+* :vytask:`T1312` Many to many NAT rules now can use source/destination and
+  translation networks of non-matching size. If 1:1 network bits translation is
+  desired, it's now users responsibility to check if prefix length matches.
+* :vytask:`T1290` IPv6 network prefix translation is fixed
+* :vytask:`T1308` Non-alphanumeric characters such as ``>`` can now be safely
+  used in PPPoE passwords
+* :vytask:`T1305` ``show | commands`` no longer fails when a config section ends
+  with a leaf node such as ``timezone`` in ``show system | commands``
+* :vytask:`T1235` ``show | commands`` correctly works in config mode now
+* :vytask:`T1298` VTI is now compatible with the DHCP-interface IPsec option
+* :vytask:`T1277` ``show dhcp server statistics`` command was broken in latest
+  Crux
+* :vytask:`T1261` An issue with TFTP server refusing to listen on addresses
+  other than loopback was fixed
+* :vytask:`T1224` Template issue that might cause UDP broadcast relay fail to
+  start is fixed
+* :vytask:`T1067` VXLAN value validation is improved
+* :vytask:`T1211` Blank hostnames in DHCP updates no longer can crash DNS
+  forwarding
+* :vytask:`T1322` Correct configuration is now generated for DHCPv6 relays with
+  more than one upstream interface
+* :vytask:`T1234` ``relay-agents-packets`` option works correctly now
+* :vytask:`T1231` Dynamic DNS data is now cleaned on configuration change
+* :vytask:`T1282` Remote Syslog can now use a fully qualified domain name
+* :vytask:`T1279` ACPI power off works again
+* :vytask:`T1247` Negation in WAN load balancing rules works again
+* :vytask:`T1218` FRR staticd now starts on boot correctly
+* :vytask:`T1296` The installer now correctly detects SD card devices
+* :vytask:`T1225` Wireguard peers can be disabled now
+* :vytask:`T1217` The issue with Wireguard interfaces impossible to delete
+  is fixed
+* :vytask:`T1160` Unintended IPv6 access is fixed in SNMP configuration
+* :vytask:`T1060` It's now possible to exclude hosts from the transparent
+  web proxy
+* :vytask:`T484` An issue with rules impossible to delete from the zone-based
+  firewall is fixed
\ No newline at end of file
diff --git a/docs/changelog/1.2.2.rst b/docs/changelog/1.2.2.rst
new file mode 100644
index 00000000..17ba941f
--- /dev/null
+++ b/docs/changelog/1.2.2.rst
@@ -0,0 +1,46 @@
+1.2.2
+=====
+
+1.2.2 is a maintenance release made in July 2019.
+
+New features
+------------
+
+* Options for per-interface MSS clamping.
+* BGP extended next-hop capability
+* Relaxed BGP multipath option
+* Internal and external options for "remote-as" (accept any AS as long as it's
+  the same to this router or different, respectively)
+* "Unnumbered" (interface-based) BGP peers
+* BGP no-prepend option
+* Additive BGP community option
+* OSPFv3 network type option
+* Custom arguments for VRRP scripts
+* A script for querying values from config files
+
+Resolved issues
+---------------
+
+* Linux kernel 4.19.54, including a fix for the TCP SACK vulnerability
+* :vytask:`T1371` VRRP health-check scripts now can use arguments
+* :vytask:`T1497` DNS server addresses coming from a DHCP server are now
+  correctly propagated to resolv.conf
+* :vytask:`T1469` Domain-specific name servers in DNS forwarding are now used
+  for recursive queries
+* :vytask:`T1433` ``run show dhcpv6 server leases`` now display leases correctly
+* :vytask:`T1461` Deleting ``firewall options`` node no longer causes errors
+* :vytask:`T1458` Correct hostname is sent to remote syslog again
+* :vytask:`T1438` Board serial number from DMI is correctly displayed in
+  ``show version``
+* :vytask:`T1358`, :vytask:`T1355`, :vytask:`T1294` Multiple corrections in
+  remote syslog config
+* :vytask:`T1255` Fixed missing newline in ``/etc/hosts``
+* :vytask:`T1174` ``system domain-name`` is correctly included in
+  ``/etc/resolv.conf``
+* :vytask:`T1465` Fixed priority inversion in ``interfaces vti vtiX ip``
+  settings
+* :vytask:`T1446` Fixed errors when installing with RAID1 on UEFI machines
+* :vytask:`T1387` Fixed an error on disabling an interfaces that has no address
+* :vytask:`T1367` Fixed deleting VLAN interface with non-default MTU
+* :vytask:`T1505` vyos.config ``return_effective_values()`` function now
+  correctly returns a list rather than a string
\ No newline at end of file
diff --git a/docs/changelog/1.2.3.rst b/docs/changelog/1.2.3.rst
new file mode 100644
index 00000000..653beec1
--- /dev/null
+++ b/docs/changelog/1.2.3.rst
@@ -0,0 +1,62 @@
+1.2.3
+=====
+
+1.2.3 is a maintenance and feature backport release made in September 2019.
+
+New features
+------------
+
+* HTTP API
+* :vytask:`T1524` "set service dns forwarding allow-from <IPv4 net|IPv6 net>"
+  option for limiting queries to specific client networks
+* :vytask:`T1503` Functions for checking if a commit is in progress
+* :vytask:`T1543` "set system contig-mangement commit-archive source-address"
+  option
+* :vytask:`T1554` Intel NIC drivers now support receive side scaling and
+  multiqueue
+
+Resolved issues
+---------------
+
+* :vytask:`T1209` OSPF max-metric values over 100 no longer causes commit
+  errors
+* :vytask:`T1333` Fixes issue with DNS forwarding not performing recursive
+  lookups on domain specific forwarders
+* :vytask:`T1362` Special characters in VRRP passwords are handled correctly
+* :vytask:`T1377` BGP weight is applied properly
+* :vytask:`T1420` Fixed permission for log files
+* :vytask:`T1425` Wireguard interfaces now support /31 addresses
+* :vytask:`T1428` Wireguard correctly handles firewall marks
+* :vytask:`T1439` DHCPv6 static mappings now work correctly
+* :vytask:`T1450` Flood ping commands now works correctly
+* :vytask:`T1460` Op mode "show firewall" commands now support counters longer
+  than 8 digits (T1460)
+* :vytask:`T1465` Fixed priority inversion in VTI commands
+* :vytask:`T1468` Fixed remote-as check in the BGP route-reflector-client option
+* :vytask:`T1472` It's now possible to re-create VRRP groups with RFC
+  compatibility mode enabled
+* :vytask:`T1527` Fixed a typo in DHCPv6 server help strings
+* :vytask:`T1529` Unnumbered BGP peers now support VLAN interfaces
+* :vytask:`T1530` Fixed "set system syslog global archive file" command
+* :vytask:`T1531` Multiple fixes in cluster configuration scripts
+* :vytask:`T1537` Fixed missing help text for "service dns"
+* :vytask:`T1541` Fixed input validation in DHCPv6 relay options
+* :vytask:`T1551` It's now possible to create a QinQ interface and a firewall
+  assigned to it in one commit
+* :vytask:`T1559` URL filtering now uses correct rule database path and works
+  again
+* :vytask:`T1579` "show log vpn ipsec" command works again
+* :vytask:`T1576` "show arp interface <intf>" command works again
+* :vytask:`T1605` Fixed regression in L2TP/IPsec server
+* :vytask:`T1613` Netflow/sFlow captures IPv6 traffic correctly
+* :vytask:`T1616` "renew dhcpv6" command now works from op mode
+* :vytask:`T1642` BGP remove-private-as option iBGP vs eBGP check works
+  correctly now
+* :vytask:`T1540`, :vytask:`T1360`, :vytask:`T1264`, :vytask:`T1623` Multiple
+  improvements in name servers and hosts configuration handling
+
+Internals
+---------
+
+``/etc/resolv.conf`` and ``/etc/hosts`` files are now managed by the
+*vyos-hostsd* service that listens on a ZMQ socket for update messages.
\ No newline at end of file
diff --git a/docs/changelog/1.2.4.rst b/docs/changelog/1.2.4.rst
new file mode 100644
index 00000000..397c9bb9
--- /dev/null
+++ b/docs/changelog/1.2.4.rst
@@ -0,0 +1,65 @@
+1.2.4
+=====
+
+1.2.4 is a maintenance release made in December 2019.
+
+Resolved issues
+---------------
+
+* :vytask:`T258` Can not configure wan load-balancing on vyos-1.2
+* :vytask:`T818` SNMP v3 - remove required engineid from user node
+* :vytask:`T1030` Upgrade ddclient from 3.8.2 to 3.9.0 (support Cloudflare API v4)
+* :vytask:`T1183` BFD Support via FRR
+* :vytask:`T1299` Allow SNMPd to be extended with custom scripts
+* :vytask:`T1351` accel-pppoe adding CIDR based IP pool option
+* :vytask:`T1391` In route-map set community additive
+* :vytask:`T1394` syslog systemd and host_name.py race condition
+* :vytask:`T1401` Copying files with the FTP protocol fails if the password contains special characters
+* :vytask:`T1421` OpenVPN client push-route stopped working, needs added quotes to fix
+* :vytask:`T1430` Add options for custom DHCP client-id and hostname
+* :vytask:`T1447` Python subprocess called without import in host_name.py
+* :vytask:`T1470` improve output of "show dhcpv6 server leases"
+* :vytask:`T1485` Enable 'AdvIntervalOpt' option in for radvd.conf
+* :vytask:`T1496` Separate rolling release and LTS kernel builds
+* :vytask:`T1560` "set load-balancing wan rule 0" causes segfault and prevents load balancing from starting
+* :vytask:`T1568` strip-private command improvement for additional masking of IPv6 and MAC address
+* :vytask:`T1578` completion offers "show table", but show table does not exist
+* :vytask:`T1593` Support ip6gre
+* :vytask:`T1597` /usr/sbin/rsyslogd after deleting "system syslog"
+* :vytask:`T1638` vyos-hostsd not setting system domain name
+* :vytask:`T1678` hostfile-update missing line feed
+* :vytask:`T1694` NTPd: Do not listen on all interfaces by default
+* :vytask:`T1701` Delete domain-name and domain-search won't work
+* :vytask:`T1705` High CPU usage by bgpd when snmp is active
+* :vytask:`T1707` DHCP static mapping and exclude address not working
+* :vytask:`T1708` Update Rolling Release Kernel to 4.19.76
+* :vytask:`T1709` Update WireGuard to 0.0.20190913
+* :vytask:`T1716` Update Intel NIC drivers to recent versions
+* :vytask:`T1726` Update Linux Firmware binaries to a more recent version 2019-03-14 -> 2019-10-07
+* :vytask:`T1728` Update Linux Kernel to 4.19.79
+* :vytask:`T1737` SNMP tab completion missing
+* :vytask:`T1738` Copy SNMP configuration from node to node raises exception
+* :vytask:`T1740` Broken OSPFv2 virtual-link authentication
+* :vytask:`T1742` NHRP unable to commit.
+* :vytask:`T1745` dhcp-server commit fails with "DHCP range stop address x must be greater or equal to the range start address y!" when static mapping has same IP as range stop
+* :vytask:`T1749` numeric validator doesn't support multiple ranges
+* :vytask:`T1769` Remove complex SNMPv3 Transport Security Model (TSM)
+* :vytask:`T1772` <regex> constraints in XML are partially broken
+* :vytask:`T1778` Kilobits/Megabits difference in configuration Vyos/FRR
+* :vytask:`T1780` Adding ipsec ike closeaction
+* :vytask:`T1786` disable-dhcp-nameservers is missed in current host_name.py implementation
+* :vytask:`T1788` Intel QAT (QuickAssist Technology ) implementation
+* :vytask:`T1792` Update WireGuard to Debian release 0.0.20191012-1
+* :vytask:`T1800` Update Linux Kernel to v4.19.84
+* :vytask:`T1809` Wireless: SSID scan does not work in AP mode
+* :vytask:`T1811` Upgrade from 1.1.8: Config file migration failed: module=l2tp
+* :vytask:`T1812` DHCP: hostnames of clients not resolving after update v1.2.3 -> 1.2-rolling
+* :vytask:`T1819` Reboot kills SNMPv3 configuration
+* :vytask:`T1822` Priority inversion wireless interface dhcpv6
+* :vytask:`T1825` Improve DHCP configuration error message
+* :vytask:`T1836` import-conf-mode-commands in vyos-1x/scripts fails to create an xml
+* :vytask:`T1839` LLDP shows "VyOS unknown" instead of "VyOS"
+* :vytask:`T1841` PPP ipv6-up.d direcotry missing
+* :vytask:`T1893` igmp-proxy: Do not allow adding unknown interface
+* :vytask:`T1903` Implementation udev predefined interface naming
+* :vytask:`T1904` update eth1 and eth2 link files for the vep4600
\ No newline at end of file
diff --git a/docs/changelog/1.2.5.rst b/docs/changelog/1.2.5.rst
new file mode 100644
index 00000000..231e92f2
--- /dev/null
+++ b/docs/changelog/1.2.5.rst
@@ -0,0 +1,60 @@
+1.2.5
+=====
+
+1.2.5 is a maintenance release made in April 2020.
+
+Resolved issues
+---------------
+
+* :vytask:`1020` OSPF Stops distributing default route after a while
+* :vytask:`1228` pppoe default-route force option not working (Rel 1.2.0-rc11)
+* :vytask:`1301` bgp peer-groups don't work when "no-ipv4-unicast" is enabled.
+* :vytask:`1341` Adding rate-limiter for pppoe server users
+* :vytask:`1376` Incorrect DHCP lease counting
+* :vytask:`1392` Large firewall rulesets cause the system to lose configuration and crash at startup
+* :vytask:`1416` 2 dhcp server run in failover mode can't sync hostname with each other
+* :vytask:`1452` accel-pppoe - add vendor option to shaper
+* :vytask:`1490` BGP configuration (is lost|not applied) when updating 1.1.8 -> 1.2.1
+* :vytask:`1780` Adding ipsec ike closeaction
+* :vytask:`1803` Unbind NTP while it's not requested...
+* :vytask:`1821` "authentication mode radius" has no effect for PPPoE server
+* :vytask:`1827` Increase default gc_thresh
+* :vytask:`1828` Missing completion helper for "set system syslog host 192.0.2.1 facility all protocol"
+* :vytask:`1832` radvd adding feature DNSSL branch.example.com example.com to existing package
+* :vytask:`1837` PPPoE unrecognized option 'replacedefaultroute'
+* :vytask:`1851` wireguard - changing the pubkey on an existing peer seems to destroy the running config.
+* :vytask:`1858` l2tp: Delete depricated outside-nexthop and add gateway-address
+* :vytask:`1864` Lower IPSec DPD timeout lower limit from 10s -> 2s
+* :vytask:`1879` Extend Dynamic DNS XML definition value help strings and validators
+* :vytask:`1881` Execute permissions are removed from custom SNMP scripts at commit time
+* :vytask:`1884` Keeping VRRP transition-script native behaviour and adding stop-script
+* :vytask:`1891` Router announcements broken on boot
+* :vytask:`1900` Enable SNMP for VRRP.
+* :vytask:`1902` Add redistribute non main table in bgp
+* :vytask:`1909` Incorrect behaviour of static routes with overlapping networks
+* :vytask:`1913` "system ipv6 blacklist" command has no effect
+* :vytask:`1914` IPv6 multipath hash policy does not apply
+* :vytask:`1917` Update WireGuard to Debian release 0.0.20191219-1
+* :vytask:`1934` Change default hostname when deploy from OVA without params.
+* :vytask:`1935` NIC identification and usage problem in Hyper-V environments
+* :vytask:`1936` pppoe-server CLI control features
+* :vytask:`1964` SNMP Script-extensions allows names with spaces, but commit fails
+* :vytask:`1967` BGP parameter "enforce-first-as" does not work anymore
+* :vytask:`1970` Correct adding interfaces on boot
+* :vytask:`1971` Missing modules in initrd.img for PXE boot
+* :vytask:`1998` Update FRR to 7.3
+* :vytask:`2001` Error when router reboot
+* :vytask:`2032` Monitor bandwidth bits
+* :vytask:`2059` Set source-validation on bond vif don't work
+* :vytask:`2066` PPPoE interface can be created multiple times - last wins
+* :vytask:`2069` PPPoE-client does not works with service-name option
+* :vytask:`2077` ISO build from crux branch is failing
+* :vytask:`2079` Update Linux Kernel to v4.19.106
+* :vytask:`2087` Add maxfail 0 option to pppoe configuration.
+* :vytask:`2100` BGP route adverisement wih checks rib
+* :vytask:`2120` "reset vpn ipsec-peer" doesn't work with named peers
+* :vytask:`2197` Cant add vif-s interface into a bridge
+* :vytask:`2228` WireGuard does not allow ports < 1024 to be used
+* :vytask:`2252` HTTP API add system image can return '504 Gateway Time-out'
+* :vytask:`2272` Set system flow-accounting disable-imt has syntax error
+* :vytask:`2276` PPPoE server vulnerability
\ No newline at end of file
diff --git a/docs/changelog/index.rst b/docs/changelog/index.rst
new file mode 100644
index 00000000..26262932
--- /dev/null
+++ b/docs/changelog/index.rst
@@ -0,0 +1,14 @@
+#########
+Changelog
+#########
+
+
+.. toctree::
+   :maxdepth: 1
+   :includehidden:
+
+   1.2.5
+   1.2.4
+   1.2.3
+   1.2.2
+   1.2.1