ipsec-interface: syntax correction

The command to set the vpn interface is changed in the rolling release
which is not modified in many configuration examples, corrected syntax
in all pages where it is mentioned

8 files changed, 15 insertions, 15 deletions

diff --git a/docs/configuration/interfaces/l2tpv3.rst b/docs/configuration/interfaces/l2tpv3.rst
index ca0ce2c9..191158b7 100644
--- a/docs/configuration/interfaces/l2tpv3.rst
+++ b/docs/configuration/interfaces/l2tpv3.rst
@@ -141,7 +141,7 @@ IPSec:
 
 .. code-block:: none
 
-  set vpn ipsec ipsec-interfaces <VPN-interface>
+  set vpn ipsec interface <VPN-interface>
   set vpn ipsec esp-group test-ESP-1 compression 'disable'
   set vpn ipsec esp-group test-ESP-1 lifetime '3600'
   set vpn ipsec esp-group test-ESP-1 mode 'transport'
diff --git a/docs/configuration/loadbalancing/index.rst b/docs/configuration/loadbalancing/index.rst
index 36a69f89..5034547b 100644
--- a/docs/configuration/loadbalancing/index.rst
+++ b/docs/configuration/loadbalancing/index.rst
@@ -13,7 +13,7 @@ the routing table and balances traffic across the configured interfaces,
 determined by interface health and weight.
 
 
-In a minimal, configuration the following must be provided:
+In a minimal configuration, the following must be provided:
 
  * an interface with a nexthop
  * one rule with a LAN (inbound-interface) and the WAN (interface).
diff --git a/docs/configuration/nat/nat44.rst b/docs/configuration/nat/nat44.rst
index 02aa4ece..62964fea 100644
--- a/docs/configuration/nat/nat44.rst
+++ b/docs/configuration/nat/nat44.rst
@@ -684,7 +684,7 @@ external interface in the image above)
   set vpn ipsec esp-group my-esp proposal 1 encryption 'aes256'
   set vpn ipsec esp-group my-esp proposal 1 hash 'sha256'
 
-  set vpn ipsec ipsec-interfaces interface 'eth1'
+  set vpn ipsec interface 'eth1'
 
 IPSec VPN Tunnels
 """""""""""""""""
diff --git a/docs/configuration/system/acceleration.rst b/docs/configuration/system/acceleration.rst
index 4c595022..62b85c71 100644
--- a/docs/configuration/system/acceleration.rst
+++ b/docs/configuration/system/acceleration.rst
@@ -69,7 +69,7 @@ Side A:
     set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group '14'
     set vpn ipsec ike-group MyIKEGroup proposal 1 encryption 'aes256'
     set vpn ipsec ike-group MyIKEGroup proposal 1 hash 'sha256'
-    set vpn ipsec ipsec-interfaces interface 'eth0'
+    set vpn ipsec interface 'eth0'
     set vpn ipsec site-to-site peer 10.10.10.1 authentication mode 'pre-shared-secret'
     set vpn ipsec site-to-site peer 10.10.10.1 authentication pre-shared-secret 'Qwerty123'
     set vpn ipsec site-to-site peer 10.10.10.1 connection-type 'initiate'
@@ -88,7 +88,7 @@ Side B:
     set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group '14'
     set vpn ipsec ike-group MyIKEGroup proposal 1 encryption 'aes256'
     set vpn ipsec ike-group MyIKEGroup proposal 1 hash 'sha256'
-    set vpn ipsec ipsec-interfaces interface 'eth0'
+    set vpn ipsec interface 'eth0'
     set vpn ipsec site-to-site peer 10.10.10.2 authentication mode 'pre-shared-secret'
     set vpn ipsec site-to-site peer 10.10.10.2 authentication pre-shared-secret 'Qwerty123'
     set vpn ipsec site-to-site peer 10.10.10.2 connection-type 'initiate'
@@ -143,4 +143,4 @@ increases.
     [  9]   0.00-10.01  sec   925 MBytes   775 Mbits/sec                  receiver
 
 
-.. _`Intel® QAT`: https://www.intel.com/content/www/us/en/architecture-and-technology/intel-quick-assist-technology-overview.html
\ No newline at end of file
+.. _`Intel® QAT`: https://www.intel.com/content/www/us/en/architecture-and-technology/intel-quick-assist-technology-overview.html
diff --git a/docs/configuration/vpn/dmvpn.rst b/docs/configuration/vpn/dmvpn.rst
index 50563e8b..66fc79da 100644
--- a/docs/configuration/vpn/dmvpn.rst
+++ b/docs/configuration/vpn/dmvpn.rst
@@ -218,7 +218,7 @@ Hub
   set vpn ipsec ike-group IKE-HUB proposal 2 encryption 'aes128'
   set vpn ipsec ike-group IKE-HUB proposal 2 hash 'sha1'
 
-  set vpn ipsec ipsec-interfaces interface 'eth0'
+  set vpn ipsec interface 'eth0'
 
   set vpn ipsec profile NHRPVPN authentication mode 'pre-shared-secret'
   set vpn ipsec profile NHRPVPN authentication pre-shared-secret 'secret'
@@ -328,7 +328,7 @@ VyOS can also run in DMVPN spoke mode.
   set vpn ipsec ike-group IKE-HUB proposal 2 encryption 'aes128'
   set vpn ipsec ike-group IKE-HUB proposal 2 hash 'sha1'
 
-  set vpn ipsec ipsec-interfaces interface 'eth0'
+  set vpn ipsec interface 'eth0'
 
   set vpn ipsec profile NHRPVPN authentication mode 'pre-shared-secret'
   set vpn ipsec profile NHRPVPN authentication pre-shared-secret 'secret'
diff --git a/docs/configuration/vpn/ipsec.rst b/docs/configuration/vpn/ipsec.rst
index 693f3ec6..d1ea7bbc 100644
--- a/docs/configuration/vpn/ipsec.rst
+++ b/docs/configuration/vpn/ipsec.rst
@@ -198,7 +198,7 @@ On the LEFT:
   set interfaces tunnel tun0 address 10.10.10.1/30
 
   ## IPsec
-  set vpn ipsec ipsec-interfaces interface eth0
+  set vpn ipsec interface eth0
 
   # IKE group
   set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group '2'
diff --git a/docs/configuration/vpn/l2tp.rst b/docs/configuration/vpn/l2tp.rst
index 411b7b5e..8dc34ee4 100644
--- a/docs/configuration/vpn/l2tp.rst
+++ b/docs/configuration/vpn/l2tp.rst
@@ -14,7 +14,7 @@ with native Windows and Mac VPN clients):
 
 .. code-block:: none
 
-  set vpn ipsec ipsec-interfaces interface eth0
+  set vpn ipsec interface eth0
 
   set vpn l2tp remote-access outside-address 192.0.2.2
   set vpn l2tp remote-access client-ip-pool start 192.168.255.2
@@ -24,7 +24,7 @@ with native Windows and Mac VPN clients):
   set vpn l2tp remote-access authentication mode local
   set vpn l2tp remote-access authentication local-users username test password 'test'
 
-In the example above an external IP of 192.0.2.2 is assumed.
+In the above example, an external IP of 192.0.2.2 is assumed.
 
 If a local firewall policy is in place on your external interface you will need
 to allow the ports below:
diff --git a/docs/configuration/vpn/site2site_ipsec.rst b/docs/configuration/vpn/site2site_ipsec.rst
index 2fa59dc1..fdcd3385 100644
--- a/docs/configuration/vpn/site2site_ipsec.rst
+++ b/docs/configuration/vpn/site2site_ipsec.rst
@@ -181,7 +181,7 @@ Example:
   set vpn ipsec ike-group office-srv-ike lifetime '3600'
   set vpn ipsec ike-group office-srv-ike proposal 1 encryption 'aes256'
   set vpn ipsec ike-group office-srv-ike proposal 1 hash 'sha1'
-  set vpn ipsec ipsec-interfaces interface 'eth1'
+  set vpn ipsec interface 'eth1'
   set vpn ipsec site-to-site peer 203.0.113.2 authentication mode 'pre-shared-secret'
   set vpn ipsec site-to-site peer 203.0.113.2 authentication pre-shared-secret 'SomePreSharedKey'
   set vpn ipsec site-to-site peer 203.0.113.2 ike-group 'office-srv-ike'
@@ -204,7 +204,7 @@ Example:
   set vpn ipsec ike-group office-srv-ike lifetime '3600'
   set vpn ipsec ike-group office-srv-ike proposal 1 encryption 'aes256'
   set vpn ipsec ike-group office-srv-ike proposal 1 hash 'sha1'
-  set vpn ipsec ipsec-interfaces interface 'eth1'
+  set vpn ipsec interface 'eth1'
   set vpn ipsec site-to-site peer 198.51.100.3 authentication mode 'pre-shared-secret'
   set vpn ipsec site-to-site peer 198.51.100.3 authentication pre-shared-secret 'SomePreSharedKey'
   set vpn ipsec site-to-site peer 198.51.100.3 ike-group 'office-srv-ike'
@@ -305,7 +305,7 @@ Imagine the following topology
   set vpn ipsec ike-group IKEv2_DEFAULT proposal 10 dh-group '19'
   set vpn ipsec ike-group IKEv2_DEFAULT proposal 10 encryption 'aes256gcm128'
   set vpn ipsec ike-group IKEv2_DEFAULT proposal 10 hash 'sha256'
-  set vpn ipsec ipsec-interfaces interface 'eth0.201'
+  set vpn ipsec interface 'eth0.201'
   set vpn ipsec site-to-site peer 172.18.202.10 authentication id '172.18.201.10'
   set vpn ipsec site-to-site peer 172.18.202.10 authentication mode 'pre-shared-secret'
   set vpn ipsec site-to-site peer 172.18.202.10 authentication pre-shared-secret 'secretkey'
@@ -339,7 +339,7 @@ Imagine the following topology
   set vpn ipsec ike-group IKEv2_DEFAULT proposal 10 dh-group '19'
   set vpn ipsec ike-group IKEv2_DEFAULT proposal 10 encryption 'aes256gcm128'
   set vpn ipsec ike-group IKEv2_DEFAULT proposal 10 hash 'sha256'
-  set vpn ipsec ipsec-interfaces interface 'eth0.202'
+  set vpn ipsec interface 'eth0.202'
   set vpn ipsec site-to-site peer 172.18.201.10 authentication id '172.18.202.10'
   set vpn ipsec site-to-site peer 172.18.201.10 authentication mode 'pre-shared-secret'
   set vpn ipsec site-to-site peer 172.18.201.10 authentication pre-shared-secret 'secretkey'