diff options
| author | Christian Poessinger <christian@poessinger.com> | 2019-12-31 10:39:30 +0100 |
|---|---|---|
| committer | Christian Poessinger <christian@poessinger.com> | 2019-12-31 10:39:30 +0100 |
| commit | 395a55091964acb45659828ba2bd4595fb4774d6 (patch) | |
| tree | e1f1aae666973eeb3190c426f28d04dde0618cae /docs/interfaces | |
| parent | a9971891eea1423b45f5a5801992c33c4cf2cd69 (diff) | |
| download | vyos-documentation-395a55091964acb45659828ba2bd4595fb4774d6.tar.gz vyos-documentation-395a55091964acb45659828ba2bd4595fb4774d6.zip | |
bond: add Juniper and Aruba examples
Diffstat (limited to 'docs/interfaces')
| -rw-r--r-- | docs/interfaces/bond.rst | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/docs/interfaces/bond.rst b/docs/interfaces/bond.rst index b53f35f5..0f923849 100644 --- a/docs/interfaces/bond.rst +++ b/docs/interfaces/bond.rst @@ -295,8 +295,55 @@ Member Interfaces Example ------- +Cisco +^^^^^ + An example configuration for a Cisco PortChannel to VyOS would be nice +Juniper EX Switch +^^^^^^^^^^^^^^^^^ + +For a headstart you can use the below example on how to build a bond with two +interfaces from VyOS to a Juniper EX Switch system. + +.. code-block:: none + + # Create aggregated ethernet device with 802.3ad LACP and port speeds of 10gbit/s + set interfaces ae0 aggregated-ether-options link-speed 10g + set interfaces ae0 aggregated-ether-options lacp active + + # Create layer 2 on the aggregated ethernet device with trunking for our vlans + set interfaces ae0 unit 0 family ethernet-switching port-mode trunk + + # Add the required vlans to the device + set interfaces ae0 unit 0 family ethernet-switching vlan members 10 + set interfaces ae0 unit 0 family ethernet-switching vlan members 100 + + # Add the two interfaces to the aggregated ethernet device, in this setup both + # ports are on the same switch (switch 0, module 1, port 0 and 1) + set interfaces xe-0/1/0 ether-options 802.3ad ae0 + set interfaces xe-0/1/1 ether-options 802.3ad ae0 + + # But this can also be done with multiple switches in a stack, a virtual + # chassis on Juniper (switch 0 and switch 1, module 1, port 0 on both switches) + set interfaces xe-0/1/0 ether-options 802.3ad ae0 + set interfaces xe-1/1/0 ether-options 802.3ad ae0 + +Aruba/HP +^^^^^^^^ + +For a headstart you can use the below example on how to build a bond,port-channel +with two interfaces from VyOS to a Aruba/HP 2510G switch. + +.. code-block:: none + + # Create trunk with 2 member interfaces (interface 1 and 2) and LACP + trunk 1-2 Trk1 LACP + + # Add the required vlans to the trunk + vlan 10 tagged Trk1 + vlan 100 tagged Trk1 + Operation ######### |