Refactor "code-block:: console" to "code-block:: none"

9 files changed, 39 insertions, 39 deletions

diff --git a/docs/routing/arp.rst b/docs/routing/arp.rst
index bcc542d1..358476ac 100644
--- a/docs/routing/arp.rst
+++ b/docs/routing/arp.rst
@@ -31,7 +31,7 @@ Operation
 
 Display all known ARP table entries spanning accross all interfaces
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos:~$ show protocols static arp
   Address                  HWtype  HWaddress           Flags Mask     Iface
@@ -43,7 +43,7 @@ Display all known ARP table entries spanning accross all interfaces
 
 Display all known ARP table entries on a given interface only (`eth1`):
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos:~$ show protocols static arp interface eth1
   Address                  HWtype  HWaddress           Flags Mask     Iface
diff --git a/docs/routing/bgp.rst b/docs/routing/bgp.rst
index 6a2ce581..4fac4889 100644
--- a/docs/routing/bgp.rst
+++ b/docs/routing/bgp.rst
@@ -15,7 +15,7 @@ A simple eBGP configuration:
 
 **Node 1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols bgp 65534 neighbor 192.168.0.2 ebgp-multihop '2'
   set protocols bgp 65534 neighbor 192.168.0.2 remote-as '65535'
@@ -25,7 +25,7 @@ A simple eBGP configuration:
 
 **Node 2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols bgp 65535 neighbor 192.168.0.1 ebgp-multihop '2'
   set protocols bgp 65535 neighbor 192.168.0.1 remote-as '65534'
@@ -40,13 +40,13 @@ creating a static route:**
 
 **Node 1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route 172.16.0.0/16 blackhole distance '254'
 
 **Node 2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route 172.17.0.0/16 blackhole distance '254'
 
@@ -58,7 +58,7 @@ A simple BGP configuration via IPv6.
 
 **Node 1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols bgp 65534 neighbor 2001:db8::2 ebgp-multihop '2'
   set protocols bgp 65534 neighbor 2001:db8::2 remote-as '65535'
@@ -69,7 +69,7 @@ A simple BGP configuration via IPv6.
 
 **Node 2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols bgp 65535 neighbor 2001:db8::1 ebgp-multihop '2'
   set protocols bgp 65535 neighbor 2001:db8::1 remote-as '65534'
@@ -84,13 +84,13 @@ creating a static route:**
 
 **Node 1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route6 2001:db8:1::/48 blackhole distance '254'
 
 **Node 2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route6 2001:db8:2::/48 blackhole distance '254'
 
@@ -101,7 +101,7 @@ Route filter can be applied using a route-map:
 
 **Node1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set policy prefix-list AS65535-IN rule 10 action 'permit'
   set policy prefix-list AS65535-IN rule 10 prefix '172.16.0.0/16'
@@ -124,7 +124,7 @@ Route filter can be applied using a route-map:
 
 **Node2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set policy prefix-list AS65534-IN rule 10 action 'permit'
   set policy prefix-list AS65534-IN rule 10 prefix '172.17.0.0/16'
diff --git a/docs/routing/igmp-proxy.rst b/docs/routing/igmp-proxy.rst
index 6cf5187e..d08c42e2 100644
--- a/docs/routing/igmp-proxy.rst
+++ b/docs/routing/igmp-proxy.rst
@@ -14,7 +14,7 @@ simple example:
 
 Interface eth1 LAN is behind NAT. In order to subscribe 10.0.0.0/23 subnet multicast which is in eth0 WAN we need igmp-proxy.
 
-.. code-block:: console
+.. code-block:: none
 
   # show protocols igmp-proxy
   interface eth0 {
diff --git a/docs/routing/mss-clamp.rst b/docs/routing/mss-clamp.rst
index 329910b0..986c5062 100644
--- a/docs/routing/mss-clamp.rst
+++ b/docs/routing/mss-clamp.rst
@@ -9,7 +9,7 @@ to clamp your TCP MSS value for IPv4 and IPv6.
 
 Clamping can be disabled per interface using the `disable` keyword:
 
-.. code-block:: console
+.. code-block:: none
 
   set firewall options interface pppoe0 disable
 
@@ -19,7 +19,7 @@ IPv4
 Clamp outgoing MSS value in a TCP SYN packet to `1452` for `pppoe0` and `1372`
 for your WireGuard `wg02` tunnel.
 
-.. code-block:: console
+.. code-block:: none
 
   set firewall options interface pppoe0 adjust-mss '1452'
   set firewall options interface wg02 adjust-mss '1372'
@@ -32,7 +32,7 @@ Clamp outgoing MSS value in a TCP SYN packet to `1280` for both `pppoe0` and
 
 To achieve the same for IPv6 please use:
 
-.. code-block:: console
+.. code-block:: none
 
   set firewall options interface pppoe0 adjust-mss6 '1280'
   set firewall options interface wg02 adjust-mss6 '1280'
diff --git a/docs/routing/ospf.rst b/docs/routing/ospf.rst
index eca0acd3..bee70895 100644
--- a/docs/routing/ospf.rst
+++ b/docs/routing/ospf.rst
@@ -19,13 +19,13 @@ OSPFv2 (IPv4)
 In order to have a VyOS system exchanging routes with OSPF neighbors, you will
 at least need to configure the area and a network,
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols ospf area 0 network 192.168.0.0/24
 
 as well as the router ID.
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols ospf parameters router-id 10.1.1.1
 
@@ -36,7 +36,7 @@ address and the node 1 sending the default route:
 
 **Node 1**
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces loopback lo address 10.1.1.1/32
   set protocols ospf area 0 network 192.168.0.0/24
@@ -53,7 +53,7 @@ address and the node 1 sending the default route:
 
 **Node 2**
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces loopback lo address 10.2.2.2/32
   set protocols ospf area 0 network 192.168.0.0/24
@@ -72,7 +72,7 @@ A typical configuration using 2 nodes.
 
 **Node 1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols ospfv3 area 0.0.0.0 interface eth1
   set protocols ospfv3 area 0.0.0.0 range 2001:db8:1::/64
@@ -81,7 +81,7 @@ A typical configuration using 2 nodes.
 
 **Node 2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols ospfv3 area 0.0.0.0 interface eth1
   set protocols ospfv3 area 0.0.0.0 range 2001:db8:2::/64
@@ -96,7 +96,7 @@ Example configuration for WireGuard interfaces:
 
 **Node 1**
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces wireguard wg01 address 'fe80::216:3eff:fe51:fd8c/64'
   set interfaces wireguard wg01 address '192.168.0.1/24'
@@ -111,7 +111,7 @@ Example configuration for WireGuard interfaces:
 
 **Node 2**
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces wireguard wg01 address 'fe80::216:3eff:fe0a:7ada/64'
   set interfaces wireguard wg01 address '192.168.0.2/24'
@@ -126,7 +126,7 @@ Example configuration for WireGuard interfaces:
 
 **Status**
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@ospf01:~$ sh ipv6 ospfv3 neighbor
   Neighbor ID     Pri    DeadTime    State/IfState         Duration I/F[State]
diff --git a/docs/routing/pbr.rst b/docs/routing/pbr.rst
index c2746fa3..24cc8498 100644
--- a/docs/routing/pbr.rst
+++ b/docs/routing/pbr.rst
@@ -13,7 +13,7 @@ Transparent Proxy
 The following example will show how VyOS can be used to redirect web traffic to
 an external transparent proxy:
 
-.. code-block:: console
+.. code-block:: none
 
   set policy route FILTER-WEB rule 1000 destination port 80
   set policy route FILTER-WEB rule 1000 protocol tcp
@@ -26,7 +26,7 @@ default routing table.
 To create routing table 100 and add a new default gateway to be used by
 traffic matching our route policy:
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static table 100 route 0.0.0.0/0 next-hop 10.255.0.2
 
@@ -35,7 +35,7 @@ This can be confirmed using the show ip route table 100 operational command.
 Finally, to apply the policy route to ingress traffic on our LAN interface,
 we use:
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces ethernet eth1 policy route FILTER-WEB
 
@@ -62,14 +62,14 @@ Routing tables that will be used in this example are:
 
 Add default routes for routing ``table 10`` and ``table 11``
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.1.1
   set protocols static table 11 route 0.0.0.0/0 next-hop 192.0.2.2
 
 Add policy route matching VLAN source addresses
 
-.. code-block:: console
+.. code-block:: none
 
   set policy route PBR rule 20 set table '10'
   set policy route PBR rule 20 description 'Route VLAN10 traffic to table 10'
@@ -81,7 +81,7 @@ Add policy route matching VLAN source addresses
 
 Apply routing policy to **inbound** direction of out VLAN interfaces
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces ethernet eth0 vif 10 policy route 'PBR'
   set interfaces ethernet eth0 vif 11 policy route 'PBR'
@@ -89,7 +89,7 @@ Apply routing policy to **inbound** direction of out VLAN interfaces
 
 **OPTIONAL:** Exclude Inter-VLAN traffic (between VLAN10 and VLAN11) from PBR
 
-.. code-block:: console
+.. code-block:: none
 
   set policy route PBR rule 10 description 'VLAN10 <-> VLAN11 shortcut'
   set policy route PBR rule 10 destination address '192.168.188.0/24'
diff --git a/docs/routing/rip.rst b/docs/routing/rip.rst
index 261a3c5e..69d9f4b3 100644
--- a/docs/routing/rip.rst
+++ b/docs/routing/rip.rst
@@ -19,7 +19,7 @@ Simple RIP configuration using 2 nodes and redistributing connected interfaces.
 
 **Node 1:**
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces loopback address 10.1.1.1/32
   set protocols rip network 192.168.0.0/24
@@ -27,7 +27,7 @@ Simple RIP configuration using 2 nodes and redistributing connected interfaces.
 
 **Node 2:**
 
-.. code-block:: console
+.. code-block:: none
 
   set interfaces loopback address 10.2.2.2/32
   set protocols rip network 192.168.0.0/24
diff --git a/docs/routing/routing-policy.rst b/docs/routing/routing-policy.rst
index 408be955..a5714bf7 100644
--- a/docs/routing/routing-policy.rst
+++ b/docs/routing/routing-policy.rst
@@ -15,7 +15,7 @@ Routing Policy Example
 
 **Policy definition:**
 
-.. code-block:: console
+.. code-block:: none
 
   #Create policy
   set policy route-map setmet rule 2 action 'permit'
@@ -29,7 +29,7 @@ Routing Policy Example
 
 **Routes learned before routing policy applied:**
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vos1:~$ show ip bgp
   BGP table version is 0, local router ID is 192.168.56.101
@@ -44,7 +44,7 @@ Routing Policy Example
 
 **Routes learned after routing policy applied:**
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vos1:~$ sho ip b
   BGP table version is 0, local router ID is 192.168.56.101
diff --git a/docs/routing/static.rst b/docs/routing/static.rst
index 003a8767..dc0e1ab4 100644
--- a/docs/routing/static.rst
+++ b/docs/routing/static.rst
@@ -9,7 +9,7 @@ Static routes are manually configured network routes.
 A typical use for a static route is a static default route for systems that do
 not make use of DHCP or dynamic routing protocols:
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route 0.0.0.0/0 next-hop 10.1.1.1 distance '1'
 
@@ -19,7 +19,7 @@ example below, :rfc:`1918` networks are set as blackhole routes.
 This prevents these networks leaking out public interfaces, but it does not prevent
 them from being used as the most specific route has the highest priority.
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route 10.0.0.0/8 blackhole distance '254'
   set protocols static route 172.16.0.0/12 blackhole distance '254'