remove all enclosing '' from cfgcmd/opcmd

2 files changed, 21 insertions, 21 deletions

diff --git a/docs/routing/bgp.rst b/docs/routing/bgp.rst
index d8860e15..14ea1238 100644
--- a/docs/routing/bgp.rst
+++ b/docs/routing/bgp.rst
@@ -159,14 +159,14 @@ BGP Router Configuration
 ASN and Router ID
 -----------------
 
-.. cfgcmd:: set protocols bgp '<ASN>'
+.. cfgcmd:: set protocols bgp <asn>
 
    First of all you must configure BGP router with the :abbr:`ASN (Autonomous
    System Number)`. The AS number is an identifier for the autonomous system.
    The BGP protocol uses the AS number for detecting whether the BGP connection
    is internal or external.
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters router-id
+.. cfgcmd:: set protocols bgp <asn> parameters router-id
 
    This command specifies the router-ID. If router ID is not specified it will
    use the highest interface IP address.
@@ -174,19 +174,19 @@ ASN and Router ID
 Route Selection
 ---------------
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters bestpath as-path confed
+.. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path confed
 
    This command specifies that the length of confederation path sets and
    sequences should should be taken into account during the BGP best path
    decision process.
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters bestpath as-path multipath-relax
+.. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path multipath-relax
 
    This command specifies that BGP decision process should consider paths
    of equal AS_PATH length candidates for multipath computation. Without
    the knob, the entire AS_PATH must match for multipath computation.
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters bestpath as-path ignore
+.. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path ignore
 
    Ignore AS_PATH length when selecting a route
 
diff --git a/docs/routing/static.rst b/docs/routing/static.rst
index cebe42fa..52a73354 100644
--- a/docs/routing/static.rst
+++ b/docs/routing/static.rst
@@ -18,32 +18,32 @@ used to determine the forwarding table used for unicast packet forwarding.
 Static Routes
 #############
 
-.. cfgcmd:: set protocols static route '<subnet>' next-hop '<address>'
+.. cfgcmd:: set protocols static route <subnet> next-hop <address>
 
    Configure next-hop `<address>` for an IPv4 static route. Multiple static
    routes can be created.
 
-.. cfgcmd:: set protocols static route '<subnet>' next-hop '<address>' disable
+.. cfgcmd:: set protocols static route <subnet> next-hop <address> disable
 
    Disable this IPv4 static route entry.
 
-.. cfgcmd:: set protocols static route '<subnet>' next-hop '<address>' distance '<distance>'
+.. cfgcmd:: set protocols static route <subnet> next-hop <address> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
 
    Range is 1 to 255, default is 1.
 
-.. cfgcmd:: set protocols static route6 '<subnet>' next-hop '<address>'
+.. cfgcmd:: set protocols static route6 <subnet> next-hop <address>
 
    Configure next-hop `<address>` for an IPv6 static route. Multiple static
    routes can be created.
 
-.. cfgcmd:: set protocols static route6 '<subnet>' next-hop '<address>' disable
+.. cfgcmd:: set protocols static route6 <subnet> next-hop <address> disable
 
    Disable this IPv6 static route entry.
 
-.. cfgcmd:: set protocols static route6 '<subnet>' next-hop '<address>' distance '<distance>'
+.. cfgcmd:: set protocols static route6 <subnet> next-hop <address> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
@@ -57,34 +57,34 @@ Static Routes
 Interface Routes
 ================
 
-.. cfgcmd:: set protocols static interface-route '<subnet>' next-hop-interface '<interface>'
+.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface <interface>
 
    Allows you to configure the next-hop interface for an interface-based IPv4
    static route. `<interface>` will be the next-hop interface where trafic is
    routed for the given `<subnet>`.
 
-.. cfgcmd:: set protocols static interface-route '<subnet>' next-hop-interface '<interface>' disable
+.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface <interface> disable
 
    Disables interface-based IPv4 static route.
 
-.. cfgcmd:: set protocols static interface-route '<subnet>' next-hop-interface '<interface>' distance '<distance>'
+.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface <interface> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
 
    Range is 1 to 255, default is 1.
 
-.. cfgcmd:: set protocols static interface-route6 '<subnet>' next-hop-interface '<interface>'
+.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface <interface>
 
    Allows you to configure the next-hop interface for an interface-based IPv6
    static route. `<interface>` will be the next-hop interface where trafic is
    routed for the given `<subnet>`.
 
-.. cfgcmd:: set protocols static interface-route6 '<subnet>' next-hop-interface '<interface>' disable
+.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface <interface> disable
 
    Disables interface-based IPv6 static route.
 
-.. cfgcmd:: set protocols static interface-route6 '<subnet>' next-hop-interface '<interface>' distance '<distance>'
+.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface <interface> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
@@ -95,7 +95,7 @@ Interface Routes
 Blackhole
 =========
 
-.. cfgcmd:: set protocols static route '<subnet>' blackhole
+.. cfgcmd:: set protocols static route <subnet> blackhole
 
    Use this command to configure a "black-hole" route on the router. A
    black-hole route is a route for which the system silently discard packets
@@ -103,12 +103,12 @@ Blackhole
    it does not prevent them from being used as a more specific route inside your
    network.
 
-.. cfgcmd:: set protocols static route '<subnet>' blackhole distance '<distance>'
+.. cfgcmd:: set protocols static route <subnet> blackhole distance <distance>
 
    Defines blackhole distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
 
-.. cfgcmd:: set protocols static route6 '<subnet>' blackhole
+.. cfgcmd:: set protocols static route6 <subnet> blackhole
 
    Use this command to configure a "black-hole" route on the router. A
    black-hole route is a route for which the system silently discard packets
@@ -116,7 +116,7 @@ Blackhole
    it does not prevent them from being used as a more specific route inside your
    network.
 
-.. cfgcmd:: set protocols static route6 '<subnet>' blackhole distance '<distance>'
+.. cfgcmd:: set protocols static route6 <subnet> blackhole distance <distance>
 
    Defines blackhole distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.