diff options
| author | currite <sll@disroot.org> | 2020-01-31 03:08:45 +0100 |
|---|---|---|
| committer | currite <sll@disroot.org> | 2020-01-31 03:08:45 +0100 |
| commit | c69d94e55266c661cd6be59c1648d3fb8180d6c9 (patch) | |
| tree | 9bef2252741f4753f8984c7e4f0b9facb76cb7a2 /docs/routing | |
| parent | 31202ff77b598d156f4dd2e880143aef8e0c2950 (diff) | |
| download | vyos-documentation-c69d94e55266c661cd6be59c1648d3fb8180d6c9.tar.gz vyos-documentation-c69d94e55266c661cd6be59c1648d3fb8180d6c9.zip | |
ospf: fix minimum ospf requirements
Diffstat (limited to 'docs/routing')
| -rw-r--r-- | docs/routing/ospf.rst | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/docs/routing/ospf.rst b/docs/routing/ospf.rst index acffb7b3..e29ad2ab 100644 --- a/docs/routing/ospf.rst +++ b/docs/routing/ospf.rst @@ -17,19 +17,19 @@ OSPFv2 (IPv4) ^^^^^^^^^^^^^ In order to have a VyOS system exchanging routes with OSPF neighbors, you will -at least need to configure the area and a network, +at least need to configure an OSPF area and some network. .. code-block:: none set protocols ospf area 0 network 192.168.0.0/24 -as well as the router ID. +That is the minimum configuration you will need. +It is a good practice to define the router ID too. .. code-block:: none set protocols ospf parameters router-id 10.1.1.1 -That is the minimum configuration you will need. Below you can see a typical configuration using 2 nodes, redistribute loopback address and the node 1 sending the default route: |