mdns-repeater: migrate to new clicmd syntax

1 files changed, 10 insertions, 7 deletions

diff --git a/docs/services/mdns-repeater.rst b/docs/services/mdns-repeater.rst
index 22e824ba..4664ee84 100644
--- a/docs/services/mdns-repeater.rst
+++ b/docs/services/mdns-repeater.rst
@@ -9,22 +9,25 @@ and does not leave the subnet. It re-broadcast mDNS packets from one interface
 to other interfaces. This enables support for e.g. Apple Airplay devices across
 multiple VLANs.
 
+Since the mDNS protocol sends the AA records in the packet itself, the repeater
+does not need to forge the source address. Instead, the source address is of
+the interface that repeats the packet.
+
+.. cfgcmd:: set service mdns repeater interface <interface>
+
 To enable mDNS repeater you need to configure at least two interfaces. To re-
 broadcast all mDNS packets from `eth0` to `eth1` and vice versa run:
 
 .. code-block:: none
 
-  set service mdns repeater interface eth0
-  set service mdns repeater interface eth1
+  set service mdns repeater interface 'eth0'
+  set service mdns repeater interface 'eth1'
 
-mDNS repeater can be temporarily disabled without deleting the service using
+.. cfgcmd:: set service mdns repeater disable
 
-.. code-block:: none
-
-  set service mdns repeater disable
+mDNS repeater can be temporarily disabled without deleting the service using
 
 .. note:: You can not run this in a VRRP setup, if multiple mDNS repeaters
    are launched in a subnet you will experience the mDNS packet storm death!
 
-
 .. _`Multicast DNS`: https://en.wikipedia.org/wiki/Multicast_DNS