troubeshooting: fix lint errors

1 files changed, 19 insertions, 6 deletions

diff --git a/docs/troubleshooting/index.rst b/docs/troubleshooting/index.rst
index 0b3420f4..a965dbe6 100644
--- a/docs/troubleshooting/index.rst
+++ b/docs/troubleshooting/index.rst
@@ -160,9 +160,12 @@ Neighbor Discovery
 Interface names
 ***************
 
-If you find the names of your interfaces have changed, this could be because your MAC addresses have changed.
+If you find the names of your interfaces have changed, this could be because
+your MAC addresses have changed.
 
-* For example, you have a VyOS VM with 4 Ethernet interfaces named eth0, eth1, eth2 and eth3. Then, you migrate your VyOS VM to a different host and find your interfaces now are eth4, eth5, eth6 and eth7.
+* For example, you have a VyOS VM with 4 Ethernet interfaces named
+  eth0, eth1, eth2 and eth3. Then, you migrate your VyOS VM to a different
+  host and find your interfaces now are eth4, eth5, eth6 and eth7.
 
   One way to fix this issue **taking control of the MAC addresses** is:
 
@@ -174,18 +177,24 @@ If you find the names of your interfaces have changed, this could be because you
 
   Take note of MAC addresses.
 
-  Now, in order to update a MAC address in the configuration, run this command specifying the interface name and MAC address you want.
+  Now, in order to update a MAC address in the configuration, run this command
+  specifying the interface name and MAC address you want.
 
   .. code-block:: none
 
      set interfaces eth0 hw-id 00:0c:29:da:a4:fe
 
-  If it is a VM, go into the settings of the host and set the MAC address to the settings found in the config.boot file. You can also set the MAC to static if the host allows so.
+  If it is a VM, go into the settings of the host and set the MAC address to
+  the settings found in the config.boot file. You can also set the MAC to
+  static if the host allows so.
 
 
-* Another example could be when cloning VyOS VMs in GNS3 and you get into the same issue: interface names have changed.
+* Another example could be when cloning VyOS VMs in GNS3 and you get into the
+  same issue: interface names have changed.
   
-  And **a more generic way to fix it** is just deleting every MAC address at the configuration file of the cloned machine. They will be correctly regenerated automatically.
+  And **a more generic way to fix it** is just deleting every MAC address at
+  the configuration file of the cloned machine. They will be correctly
+  regenerated automatically.
 
 
 **********
@@ -436,6 +445,8 @@ These are the boot steps for VyOS 1.2
   11. Finally it runs the post-config script
       ``/config/scripts/vyos-postconfig-bootup.script``
 
+.. stop_vyoslinter
+
 .. _Quagga: https://www.quagga.net/
 .. _`GNU Zebra`: https://www.gnu.org/software/zebra/
 .. _FRR: https://frrouting.org/
@@ -444,3 +455,5 @@ These are the boot steps for VyOS 1.2
 .. _`Debian Jessie`: https://www.debian.org/releases/jessie/
 .. _tshark: https://www.wireshark.org/docs/man-pages/tshark.html
 .. _`PCAP filter expressions`: http://www.tcpdump.org/manpages/pcap-filter.7.html
+
+.. start_vyoslinter