summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
authorKim <kim.sidney@gmail.com>2019-03-25 21:32:52 +0100
committerGitHub <noreply@github.com>2019-03-25 21:32:52 +0100
commitad66a290afaba27eb9a80071ccb23704c8cc4cb0 (patch)
tree1326525f881b451792e61fd4a0bb760b861aa036 /docs
parent5d6ab100a482ae2b0efbc5cc544cc6c700f723f8 (diff)
parent6b3885f6aac2188e384aab8e1e058b456cb427df (diff)
downloadvyos-documentation-ad66a290afaba27eb9a80071ccb23704c8cc4cb0.tar.gz
vyos-documentation-ad66a290afaba27eb9a80071ccb23704c8cc4cb0.zip
Merge pull request #18 from rebortg/commandtree
add config mode entries
Diffstat (limited to 'docs')
-rw-r--r--docs/commandtree/configmode.rst500
-rw-r--r--docs/index.rst2
2 files changed, 500 insertions, 2 deletions
diff --git a/docs/commandtree/configmode.rst b/docs/commandtree/configmode.rst
index ca8df284..abb20f98 100644
--- a/docs/commandtree/configmode.rst
+++ b/docs/commandtree/configmode.rst
@@ -23,4 +23,502 @@ Configuration mode
run Run an operational-mode command
save Save configuration to a file
set Set the value of a parameter or create a new element
- show Show the configuration (default values may be suppressed) \ No newline at end of file
+ show Show the configuration (default values may be suppressed)
+
+
+Confirm
+^^^^^^^
+
+The ``confirm`` command confirms the prior ``commit-confirm``.
+
+Comment
+^^^^^^^
+
+The ``comment`` commands allow you to insert a comment above the current configuration section.
+The command cannot be used at the top of the configuration hierarchy, only on subsections. Comments needs to be commited, just like other config changes.
+
+To add a comment to a section, while being already at the proper section level:
+
+.. code-block:: sh
+
+ [edit <section>]
+ vyos@vyos# comment "Type Comment Here"
+
+To add a comment directly to a section, from the top or a higher section:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# comment <section> "Type Comment Here"
+
+To remove a comment, add a blank comment to overwrite:
+
+.. code-block:: sh
+
+ [edit <section>]
+ vyos@vyos# comment ""
+
+Examples
+********
+
+To add a comment to the "interfaces" section:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# edit interfaces
+ [edit interfaces]
+ vyos@vyos# comment "Here is a comment"
+ [edit interfaces]
+ vyos@vyos# commit
+
+The comment would then appear like this:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# show
+ /* Here is a comment */
+ interfaces {
+ ethernet eth0 {
+ [...]
+
+
+An important thing to note is that since the comment is added on top of the section, it will not appear if the ``show <section>`` command is used. With the above example, the ``show interfaces`` command would return starting after the "interfaces {" line, hiding the comment:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# show interfaces
+ ethernet eth0 {
+ [...]
+
+
+To add a comment to the interfaces section from the top:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# comment interfaces "test"
+
+
+The comment can be added to any node that already exists, even if it's multiple levels lower:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# comment interfaces ethernet eth0 vif 222 address "Far down comment"
+
+
+Commit
+^^^^^^
+
+The ``commit`` command commits the proposed changes to the configuration file.
+Every changes done in the configuration session is only applied when the configuration is committed. To view the changes that will be applied, use the show command.
+To discard the changes without committing, use the ``discard`` command. The ``commit`` command doesn't save the configuration, you need to manually use the ``save`` command.
+
+The confirm keyword can be added, see ``commit-confirm``. A comment can be entered, it will appear in the commit log.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# commit
+ Possible completions:
+ <Enter> Commit working configuration
+ comment Comment for commit log
+
+Commit-confirm
+^^^^^^^^^^^^^^
+
+The ``commit-confirm`` command commits the proposed changes to the configuration file and starts a timer.
+If the ``confirm`` command is not entered before the timer expiration, the configuration will be rolled back and VyOS will reboot.
+The default timer value is 10 minutes, but a custom value can be entered.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# commit-confirm
+ Possible completions:
+ <Enter> Commit, rollback/reboot in 10 minutes if no confirm
+ <N> Commit, rollback/reboot in N minutes if no confirm
+ comment Comment for commit log
+
+
+Compare
+^^^^^^^
+
+VyOS maintains backups of previous configurations. To compare configuration revisions in configuration mode, use the compare command:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# compare
+ Possible completions:
+ <Enter> Compare working & active configurations
+ saved Compare working & saved configurations
+ <N> Compare working with revision N
+ <N> <M> Compare revision N with M
+
+ Revisions:
+ 0 2019-03-20 20:57:22 root by boot-config-loader
+ 1 2019-03-15 20:00:04 root by boot-config-loader
+ 2 2019-03-05 01:58:39 vyos by cli
+ 3 2019-03-05 01:54:59 vyos by cli
+ 4 2019-03-05 01:53:08 vyos by cli
+ 5 2019-03-05 01:52:21 vyos by cli
+ 6 2019-02-24 21:01:24 root by boot-config-loader
+ 7 2019-02-21 22:00:12 vyos by cli
+ 8 2019-02-21 21:56:49 vyos by cli
+
+
+Copy
+^^^^
+
+The ``copy`` command allows you to copy a configuration object.
+
+Copy the configuration entrys from a firewall name WAN rule 1 to rule 2.
+
+.. code-block:: sh
+
+ [edit firewall name WAN]
+ vyos@vyos# show
+ rule 1 {
+ action accept
+ source {
+ address 10.1.0.0/24
+ }
+ }
+ [edit firewall name WAN]
+ vyos@vyos# copy rule 1 to rule 2
+ [edit firewall name WAN]
+ vyos@vyos# show
+ rule 1 {
+ action accept
+ source {
+ address 10.1.0.0/24
+ }
+ }
+ +rule 2 {
+ + action accept
+ + source {
+ + address 10.1.0.0/24
+ + }
+ +}
+
+Delete
+^^^^^^
+
+The ``delte`` command is to delete a configuration entry.
+
+This Example delete the hole ``service tftp-server`` section.
+
+.. code-block:: sh
+
+ delete service tftp-server
+
+Discard
+^^^^^^^
+
+The ``discard`` command removes all pending configuration changes.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# discard
+
+ Changes have been discarded
+
+Edit
+^^^^
+
+The ``edit`` command allows you to navigate down into the configuration tree.
+To get back to an upper level, use the ``up`` command or use the ``top`` command to get back to the upper most level.
+The ``[edit]`` text displays where the user is located in the configuration tree.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# edit interfaces
+ [edit interfaces]
+ vyos@vyos# edit ethernet eth0
+ [edit interfaces ethernet eth0]
+
+Exit
+^^^^
+
+The ``exit`` command exits the current configuration mode. If the current configuration level isn't the top-most, then the configuration level is put back to the top-most level.
+If the configuration level is at the top-most level, then it exits the configuration mode and returns to operational mode.
+The ``exit`` command cannot be used if uncommitted changes exists in the configuration file. To exit with uncommitted changes, you either need to use the ``exit discard`` command or you need to commit the changes before exiting.
+The ``exit`` command doesn't save the configuration, only the ``save`` command does. A warning will be given when exiting with unsaved changes. Using the ``exit`` command in operational mode will logout the session.
+
+
+Exiting from a configuration level:
+
+
+.. code-block:: sh
+
+ [edit interfaces ethernet eth0]
+ vyos@vyos# exit
+ [edit]
+ vyos@vyos#
+
+Exiting from configuration mode:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# exit
+ exit
+ vyos@vyos:~$
+
+Exiting from operational mode:
+
+.. code-block:: sh
+
+ vyos@vyos:~$ exit
+ logout
+
+Error message when trying to exit with uncommitted changes:
+
+.. code-block:: sh
+
+ vyos@vyos# exit
+ Cannot exit: configuration modified.
+ Use 'exit discard' to discard the changes and exit.
+ [edit]
+ vyos@vyos#
+
+
+Warning message when exiting with unsaved changes:
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# exit
+ Warning: configuration changes have not been saved.
+ exit
+ vyos@vyos:~$
+
+Load
+^^^^
+
+The ``load`` command load a configuration from a local or remote file. You have to be use ``commit`` to make the change active
+
+.. code-block:: sh
+
+ <Enter> Load from system config file
+ <file> Load from file on local machine
+ scp://<user>:<passwd>@<host>/<file> Load from file on remote machine
+ sftp://<user>:<passwd>@<host>/<file> Load from file on remote machine
+ ftp://<user>:<passwd>@<host>/<file> Load from file on remote machine
+ http://<host>/<file> Load from file on remote machine
+ https://<host>/<file> Load from file on remote machine
+ tftp://<host>/<file> Load from file on remote machine
+
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# load
+ Loading configuration from '/config/config.boot'...
+
+ Load complete. Use 'commit' to make changes active.
+
+
+Loadkey
+^^^^^^^^
+
+Copies the content of a public key to the ~/.ssh/authorized_keys file.
+
+.. code-block:: sh
+
+ loadkey <username> [tab]
+
+ <file> Load from file on local machine
+ scp://<user>@<host>/<file> Load from file on remote machine
+ sftp://<user>@<host>/<file> Load from file on remote machine
+ ftp://<user>@<host>/<file> Load from file on remote machine
+ http://<host>/<file> Load from file on remote machine
+ tftp://<host>/<file> Load from file on remote machine
+
+Merge
+^^^^^
+
+The ``merge`` command merge the config from a local or remote file with the running config.
+
+In the example below exist a ``default-firewall.config`` file with some common firewall rules you saved earlier.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# show firewall
+ Configuration under specified path is empty
+ [edit]
+ vyos@vyos# merge default-firewall.config
+ Loading configuration from '/config/default-firewall.config'...
+
+ Merge complete. Use 'commit' to make changes active.
+ [edit]
+ vyos@vyos#
+
+ vyos@vyos# show firewall
+ +all-ping enable
+ +broadcast-ping disable
+ +config-trap disable
+ +ipv6-receive-redirects disable
+ +ipv6-src-route disable
+ +ip-src-route disable
+ +log-martians enable
+ +name WAN {
+ + default-action drop
+ + rule 1 {
+ + action accept
+ + source {
+ + address 10.1.0.0/24
+ + }
+ + }
+ + rule 2 {
+ + action accept
+ + source {
+ + address 10.1.0.0/24
+ + }
+ ......
+
+
+Rename
+^^^^^^
+
+The ``rename`` command allows you to rename or move a configuration object.
+
+See here how to move the configuration entrys from vlanid 3 to 2
+
+.. code-block:: sh
+
+ [edit interfaces ethernet eth1]
+ vyos@vyos# show
+ duplex auto
+ hw-id 08:00:27:81:c6:59
+ smp-affinity auto
+ speed auto
+ vif 3 {
+ address 10.4.4.4/32
+ }
+ [edit interfaces ethernet eth1]
+ vyos@vyos# rename vif 3 to vif 2
+ [edit interfaces ethernet eth1]
+ vyos@vyos# show
+ duplex auto
+ hw-id 08:00:27:81:c6:59
+ smp-affinity auto
+ speed auto
+ +vif 2 {
+ + address 10.4.4.4/32
+ +}
+ -vif 3 {
+ - address 10.4.4.4/32
+ -}
+ [edit interfaces ethernet eth1]
+ vyos@vyos#
+
+
+Rollback
+^^^^^^^^
+
+You can ``rollback`` configuration using the rollback command, however this command will currently trigger a system reboot.
+Use the compare command to verify the configuration you want to rollback to.
+
+.. code-block:: sh
+
+ vyos@vyos# compare 1
+ [edit system]
+ >host-name vyos-1
+ [edit]
+ vyos@vyos# rollback 1
+ Proceed with reboot? [confirm][y]
+
+ Broadcast message from root@vyos-1 (pts/0) (Tue Dec 17 21:07:45 2018):
+
+ The system is going down for reboot NOW!
+ [edit]
+ vyos@vyos#
+
+Run
+^^^
+
+The ``run`` command allows you to execute any operational mode commands without exiting the configuration session.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# run show interfaces
+ Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
+ Interface IP Address S/L Description
+ --------- ---------- --- -----------
+ eth0 10.1.1.1/24 u/u
+
+
+Save
+^^^^
+
+The ``save`` command saves the current configuration to non-volatile storage. VyOS also supports saving and loading configuration remotely using SCP, FTP, or TFTP.
+
+.. code-block:: sh
+
+ <Enter> Save to system config file
+ <file> Save to file on local machine
+ scp://<user>:<passwd>@<host>/<file> Save to file on remote machine
+ sftp://<user>:<passwd>@<host>/<file> Save to file on remote machine
+ ftp://<user>:<passwd>@<host>/<file> Save to file on remote machine
+ tftp://<host>/<file> Save to file on remote machine
+
+Set
+^^^
+
+The ``set`` command create all configuration entrys
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# set protocols static route 0.0.0.0/0 next-hop 192.168.1.1
+
+Show
+^^^^
+
+The ``show`` command in the configuration mode displays the configuration and show uncommitted changes.
+
+Show the hole config, the address and description of eth1 is moving to vlan 2 if you commit the changes.
+
+.. code-block:: sh
+
+ [edit]
+ vyos@vyos# show
+ interfaces {
+ dummy dum0 {
+ address 10.3.3.3/24
+ }
+ ethernet eth0 {
+ address dhcp
+ duplex auto
+ hw-id 08:00:27:2b:c0:0b
+ smp-affinity auto
+ speed auto
+ }
+ ethernet eth1 {
+ - address 10.1.1.1/32
+ - description "MGMT Interface"
+ duplex auto
+ hw-id 08:00:27:81:c6:59
+ smp-affinity auto
+ speed auto
+ + vif 2 {
+ + address 10.1.1.1/32
+ + description "MGMT Interface"
+ + }
+ }
+ loopback lo {
+ }
+ }
+ service {
+ ssh {
+ port 22
+ ...... \ No newline at end of file
diff --git a/docs/index.rst b/docs/index.rst
index e193541f..344cd761 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -28,7 +28,7 @@ as a router and firewall platform for cloud deployments.
services/index.rst
system/index.rst
clustering.rst
- image-mgmt.rst
+ image-mgmt.rst
troubleshooting.rst
examples.rst
commandtree/index.rst