diff options
| -rw-r--r-- | docs/configuration/interfaces/openvpn.rst | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/docs/configuration/interfaces/openvpn.rst b/docs/configuration/interfaces/openvpn.rst index a0802c27..62273ca0 100644 --- a/docs/configuration/interfaces/openvpn.rst +++ b/docs/configuration/interfaces/openvpn.rst @@ -131,6 +131,35 @@ Remote Configuration - Annotated: set interfaces openvpn vtun1 local-address '10.255.1.2' # Local IP of vtun interface set interfaces openvpn vtun1 remote-address '10.255.1.1' # Remote IP of vtun interface + +******************* +Firewall Exceptions +******************* + +For the WireGuard traffic to pass through the WAN interface, you must create a +firewall exception. + +.. code-block:: none + + set firewall name OUTSIDE_LOCAL rule 10 action accept + set firewall name OUTSIDE_LOCAL rule 10 description 'Allow established/related' + set firewall name OUTSIDE_LOCAL rule 10 state established enable + set firewall name OUTSIDE_LOCAL rule 10 state related enable + set firewall name OUTSIDE_LOCAL rule 20 action accept + set firewall name OUTSIDE_LOCAL rule 20 description OpenVPN_IN + set firewall name OUTSIDE_LOCAL rule 20 destination port 1195 + set firewall name OUTSIDE_LOCAL rule 20 log enable + set firewall name OUTSIDE_LOCAL rule 20 protocol udp + set firewall name OUTSIDE_LOCAL rule 20 source + +You should also ensure that the OUTISDE_LOCAL firewall group is applied to the +WAN interface and a direction (local). + +.. code-block:: none + + set interfaces ethernet eth0 firewall local name 'OUTSIDE-LOCAL' + + Static Routing: Static routes can be configured referencing the tunnel interface; for example, |