diff options
| -rw-r--r-- | docs/configuration/interfaces/l2tpv3.rst | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/docs/configuration/interfaces/l2tpv3.rst b/docs/configuration/interfaces/l2tpv3.rst index a4b7be36..8fe905a1 100644 --- a/docs/configuration/interfaces/l2tpv3.rst +++ b/docs/configuration/interfaces/l2tpv3.rst @@ -45,14 +45,14 @@ L2TPv3 options This defaults to UDP -.. cfgcmd:: set interfaces l2tpv3 <interface> local-ip <address> +.. cfgcmd:: set interfaces l2tpv3 <interface> source-address <address> - set the IP address of the local interface to be used for the tunnel. + Set the IP address of the local interface to be used for the tunnel. This address must be the address of a local interface. May be specified as an IPv4 address or an IPv6 address. -.. cfgcmd:: set interfaces l2tpv3 <interface> remote-ip <address> +.. cfgcmd:: set interfaces l2tpv3 <interface> remote <address> Set the IP address of the remote peer. May be specified as an IPv4 address or an IPv6 address. @@ -92,10 +92,10 @@ Over IP l2tpv3 l2tpeth10 { address 192.168.37.1/27 encapsulation ip - local-ip 192.0.2.1 + source-address 192.0.2.1 peer-session-id 100 peer-tunnel-id 200 - remote-ip 203.0.113.24 + remote 203.0.113.24 session-id 100 tunnel-id 200 } @@ -107,7 +107,7 @@ Over UDP UDP mode works better with NAT: -* Set local-ip to your local IP (LAN). +* Set source-address to your local IP (LAN). * Add a forwarding rule matching UDP port on your internet router. .. code-block:: none @@ -117,10 +117,10 @@ UDP mode works better with NAT: address 192.168.37.1/27 destination-port 9001 encapsulation udp - local-ip 192.0.2.1 + source-address 192.0.2.1 peer-session-id 100 peer-tunnel-id 200 - remote-ip 203.0.113.24 + remote 203.0.113.24 session-id 100 source-port 9000 tunnel-id 200 @@ -182,11 +182,11 @@ L2TPv3: set interfaces l2tpv3 l2tpeth0 description 'L2 VPN Tunnel' set interfaces l2tpv3 l2tpeth0 destination-port '5000' set interfaces l2tpv3 l2tpeth0 encapsulation 'ip' - set interfaces l2tpv3 l2tpeth0 local-ip <local-ip> + set interfaces l2tpv3 l2tpeth0 source-address <local-ip> set interfaces l2tpv3 l2tpeth0 mtu '1500' set interfaces l2tpv3 l2tpeth0 peer-session-id '110' set interfaces l2tpv3 l2tpeth0 peer-tunnel-id '10' - set interfaces l2tpv3 l2tpeth0 remote-ip <peer-ip> + set interfaces l2tpv3 l2tpeth0 remote <peer-ip> set interfaces l2tpv3 l2tpeth0 session-id '110' set interfaces l2tpv3 l2tpeth0 source-port '5000' set interfaces l2tpv3 l2tpeth0 tunnel-id '10' |