diff options
Diffstat (limited to 'docs/_locale/de/configexamples.pot')
| -rw-r--r-- | docs/_locale/de/configexamples.pot | 134 |
1 files changed, 123 insertions, 11 deletions
diff --git a/docs/_locale/de/configexamples.pot b/docs/_locale/de/configexamples.pot index d7dd346f..94068912 100644 --- a/docs/_locale/de/configexamples.pot +++ b/docs/_locale/de/configexamples.pot @@ -272,7 +272,7 @@ msgstr "A brief excursion into VRFs: This has been one of the longest-standing f msgid "A connection resource deployed in Azure linking the Azure VNet gateway and the local network gateway representing the Vyos device." msgstr "A connection resource deployed in Azure linking the Azure VNet gateway and the local network gateway representing the Vyos device." -#: ../../configexamples/index.rst:37 +#: ../../configexamples/index.rst:38 msgid "A host ``vyos-oobm`` will use as a ssh proxy. This host is just necessary for the Lab test." msgstr "A host ``vyos-oobm`` will use as a ssh proxy. This host is just necessary for the Lab test." @@ -318,6 +318,14 @@ msgstr "Active Directory on Windows server" msgid "Add (temporary) default route" msgstr "Add (temporary) default route" +#: ../../configexamples/ansible.rst:99 +msgid "Add a simple playbook with the tasks for each router:" +msgstr "Add a simple playbook with the tasks for each router:" + +#: ../../configexamples/ansible.rst:73 +msgid "Add all the VyOS hosts:" +msgstr "Add all the VyOS hosts:" + #: ../../configexamples/ansible.rst:73 msgid "Add all the hosts of VyOS:" msgstr "Add all the hosts of VyOS:" @@ -351,6 +359,10 @@ msgid "After configured all the VRFs involved in this topology we take a deeper msgstr "After configured all the VRFs involved in this topology we take a deeper look at both BGP and Routing table for the VRF LAN1" #: ../../configexamples/policy-based-ipsec-and-firewall.rst:206 +msgid "After some testing, we can check IPSec status, and counter on every tunnel:" +msgstr "After some testing, we can check IPSec status, and counter on every tunnel:" + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:206 msgid "After some testing, we can check ipsec status, and counter on every tunnel:" msgstr "After some testing, we can check ipsec status, and counter on every tunnel:" @@ -378,6 +390,14 @@ msgstr "All traffic coming in through eth2 is balanced between eth0 and eth1 on msgid "Allow DHCPv6 packets for router" msgstr "Allow DHCPv6 packets for router" +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:34 +msgid "Allow DNS requests only only for local networks." +msgstr "Allow DNS requests only only for local networks." + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:36 +msgid "Allow ICMP on all interfaces." +msgstr "Allow ICMP on all interfaces." + #: ../../configexamples/policy-based-ipsec-and-firewall.rst:32 msgid "Allow access to the router only from trusted networks." msgstr "Allow access to the router only from trusted networks." @@ -572,6 +592,10 @@ msgid "Basic Setup (via console)" msgstr "Basic Setup (via console)" #: ../../configexamples/ansible.rst:64 +msgid "Basic configuration of ansible.cfg:" +msgstr "Basic configuration of ansible.cfg:" + +#: ../../configexamples/ansible.rst:64 msgid "Basik configuration of the ansible.cfg:" msgstr "Basik configuration of the ansible.cfg:" @@ -656,11 +680,19 @@ msgstr "Cisco VPC Crossconnect - Ports 39 and 40 bonded between each switch" msgid "Clamp the VTI's MSS to 1350 to avoid PMTU blackholes." msgstr "Clamp the VTI's MSS to 1350 to avoid PMTU blackholes." +#: ../../configexamples/lac-lns.rst:96 +msgid "Client" +msgstr "Client" + #: ../../configexamples/autotest/OpenVPN_with_LDAP/OpenVPN_with_LDAP.rst:94 msgid "Client configuration" msgstr "Client configuration" #: ../../configexamples/policy-based-ipsec-and-firewall.rst:24 +msgid "Communication between private subnets should be done through IPSec tunnel without NAT." +msgstr "Communication between private subnets should be done through IPSec tunnel without NAT." + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:24 msgid "Communication between private subnets should be done through ipsec tunnel without nat." msgstr "Communication between private subnets should be done through ipsec tunnel without nat." @@ -704,7 +736,7 @@ msgstr "Configuration 'dcsp' and shaper using QoS" msgid "Configuration Blueprints" msgstr "Configuration Blueprints" -#: ../../configexamples/index.rst:30 +#: ../../configexamples/index.rst:31 msgid "Configuration Blueprints (autotest)" msgstr "Configuration Blueprints (autotest)" @@ -717,6 +749,7 @@ msgid "Configuration of basic firewall in one site, in order to:" msgstr "Configuration of basic firewall in one site, in order to:" #: ../../configexamples/inter-vrf-routing-vrf-lite.rst:113 +#: ../../configexamples/lac-lns.rst:29 #: ../../configexamples/pppoe-ipv6-basic.rst:26 msgid "Configurations" msgstr "Configurations" @@ -885,7 +918,7 @@ msgstr "Dynamic routing used between CE and PE nodes and eBGP peering establishe msgid "Each interface is assigned to a zone. The interface can be physical or virtual such as tunnels (VPN, PPTP, GRE, etc) and are treated exactly the same." msgstr "Each interface is assigned to a zone. The interface can be physical or virtual such as tunnels (VPN, PPTP, GRE, etc) and are treated exactly the same." -#: ../../configexamples/index.rst:34 +#: ../../configexamples/index.rst:35 msgid "Each lab will build an test from an external script. The page content will generate, so changes will not take an effect." msgstr "Each lab will build an test from an external script. The page content will generate, so changes will not take an effect." @@ -1008,6 +1041,10 @@ msgid "For redundant / active-active configurations see :ref:`examples-azure-vpn msgstr "For redundant / active-active configurations see :ref:`examples-azure-vpn-dual-bgp`" #: ../../configexamples/policy-based-ipsec-and-firewall.rst:10 +msgid "For simplicity, configuration and tests are done only using IPv4, and firewall configuration is done only on one router." +msgstr "For simplicity, configuration and tests are done only using IPv4, and firewall configuration is done only on one router." + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:10 msgid "For simplicity, configuration and tests are done only using ipv4, and firewall configuration in done only on one router." msgstr "For simplicity, configuration and tests are done only using ipv4, and firewall configuration in done only on one router." @@ -1213,6 +1250,10 @@ msgid "In the end, you will end up with something like this config. I took out e msgstr "In the end, you will end up with something like this config. I took out everything but the Firewall, Interfaces, and zone-policy sections. It is long enough as is." #: ../../configexamples/ansible.rst:216 +msgid "In the next chapter of the example, we'll use Ansible with jinja2 templates and variables." +msgstr "In the next chapter of the example, we'll use Ansible with jinja2 templates and variables." + +#: ../../configexamples/ansible.rst:216 msgid "In the next chapter of the example, we'll use the Ansible with jinja2 templates and variables." msgstr "In the next chapter of the example, we'll use the Ansible with jinja2 templates and variables." @@ -1252,6 +1293,14 @@ msgstr "In this example two LAN interfaces exist in different subnets instead of msgid "In this example we have 4 zones. LAN, WAN, DMZ, Local. The local zone is the firewall itself." msgstr "In this example we have 4 zones. LAN, WAN, DMZ, Local. The local zone is the firewall itself." +#: ../../configexamples/lac-lns.rst:17 +msgid "In this example we use VyOS 1.5 as LNS and Cisco IOS as LAC. All users with domain **vyos.io** will be tunneled to LNS via L2TP." +msgstr "In this example we use VyOS 1.5 as LNS and Cisco IOS as LAC. All users with domain **vyos.io** will be tunneled to LNS via L2TP." + +#: ../../configexamples/lac-lns.rst:98 +msgid "In this lab we use Windows PPPoE client." +msgstr "In this lab we use Windows PPPoE client." + #: ../../configexamples/zone-policy.rst:50 msgid "Inbound WAN connect to DMZ host." msgstr "Inbound WAN connect to DMZ host." @@ -1265,6 +1314,14 @@ msgid "Information about prefix-sid and label-operation from VyOS" msgstr "Information about prefix-sid and label-operation from VyOS" #: ../../configexamples/ansible.rst:37 +msgid "Install Ansible:" +msgstr "Install Ansible:" + +#: ../../configexamples/ansible.rst:44 +msgid "Install Paramiko:" +msgstr "Install Paramiko:" + +#: ../../configexamples/ansible.rst:37 msgid "Install the Ansible:" msgstr "Install the Ansible:" @@ -1345,6 +1402,10 @@ msgstr "L3VPN configuration parameters table:" msgid "L3VPN for Hub-and-Spoke connectivity with VyOS" msgstr "L3VPN for Hub-and-Spoke connectivity with VyOS" +#: ../../configexamples/lac-lns.rst:32 +msgid "LAC" +msgstr "LAC" + #: ../../configexamples/zone-policy.rst:392 msgid "LAN, WAN, DMZ, local and TUN (tunnel)" msgstr "LAN, WAN, DMZ, local and TUN (tunnel)" @@ -1389,6 +1450,10 @@ msgstr "LAN and DMZ hosts have basic outbound access: Web, FTP, SSH." msgid "LAN can access DMZ resources." msgstr "LAN can access DMZ resources." +#: ../../configexamples/lac-lns.rst:72 +msgid "LNS" +msgstr "LNS" + #: ../../configexamples/l3vpn-hub-and-spoke.rst:551 msgid "Let’s check IPv4 routing and MPLS information on provider nodes (same procedure for all P nodes):" msgstr "Let’s check IPv4 routing and MPLS information on provider nodes (same procedure for all P nodes):" @@ -1398,6 +1463,10 @@ msgid "Let’s say we have a requirement to have multiple networks." msgstr "Let’s say we have a requirement to have multiple networks." #: ../../configexamples/policy-based-ipsec-and-firewall.rst:22 +msgid "Local subnets should be able to reach internet using source NAT." +msgstr "Local subnets should be able to reach internet using source NAT." + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:22 msgid "Local subnets should be able to reach internet using source nat." msgstr "Local subnets should be able to reach internet using source nat." @@ -1433,9 +1502,22 @@ msgid "Masquerade Traffic originating from 10.200.201.0/24 that is heading out t msgstr "Masquerade Traffic originating from 10.200.201.0/24 that is heading out the public interface." #: ../../configexamples/autotest/OpenVPN_with_LDAP/OpenVPN_with_LDAP.rst:254 +#: ../../configexamples/lac-lns.rst:106 msgid "Monitoring" msgstr "Monitoring" +#: ../../configexamples/lac-lns.rst:117 +msgid "Monitoring on LAC side" +msgstr "Monitoring on LAC side" + +#: ../../configexamples/lac-lns.rst:108 +msgid "Monitoring on LNS side" +msgstr "Monitoring on LNS side" + +#: ../../configexamples/lac-lns.rst:140 +msgid "Monitoring on RADIUS Server side" +msgstr "Monitoring on RADIUS Server side" + #: ../../configexamples/autotest/tunnelbroker/tunnelbroker.rst:162 msgid "Multiple LAN/DMZ Setup" msgstr "Multiple LAN/DMZ Setup" @@ -1456,6 +1538,7 @@ msgstr "Native IPv4 and IPv6" msgid "Network Cabling" msgstr "Network Cabling" +#: ../../configexamples/lac-lns.rst:21 #: ../../configexamples/pppoe-ipv6-basic.rst:18 msgid "Network Topology" msgstr "Network Topology" @@ -1463,6 +1546,7 @@ msgstr "Network Topology" #: ../../configexamples/ansible.rst:-1 #: ../../configexamples/inter-vrf-routing-vrf-lite.rst:-1 #: ../../configexamples/l3vpn-hub-and-spoke.rst:-1 +#: ../../configexamples/lac-lns.rst:-1 #: ../../configexamples/nmp.rst:-1 #: ../../configexamples/pppoe-ipv6-basic.rst:-1 #: ../../configexamples/qos.rst:-1 @@ -1655,6 +1739,10 @@ msgstr "PPPoE IPv6 Basic Setup for Home Network" msgid "PPPoE Setup" msgstr "PPPoE Setup" +#: ../../configexamples/lac-lns.rst:7 +msgid "PPPoE over L2TP" +msgstr "PPPoE over L2TP" + #: ../../configexamples/segment-routing-isis.rst:255 msgid "Ping between VyOS-P1 / VyOS-P2 to confirm reachability:" msgstr "Ping between VyOS-P1 / VyOS-P2 to confirm reachability:" @@ -1692,6 +1780,10 @@ msgid "Priorities" msgstr "Priorities" #: ../../configexamples/policy-based-ipsec-and-firewall.rst:29 +msgid "Protect the router on 'WAN' interface, allowing only IPSec connections and SSH access from trusted IPs." +msgstr "Protect the router on 'WAN' interface, allowing only IPSec connections and SSH access from trusted IPs." + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:29 msgid "Protect the router on 'WAN' interface, allowing only ipsec connections and ssh access from trusted ips." msgstr "Protect the router on 'WAN' interface, allowing only ipsec connections and ssh access from trusted ips." @@ -2046,7 +2138,7 @@ msgstr "The lab I built is using a VRF (called **mgmt**) to provide out-of-band msgid "The lab was built using EVE-NG." msgstr "The lab was built using EVE-NG." -#: ../../configexamples/index.rst:32 +#: ../../configexamples/index.rst:33 msgid "The next pages contains automatic full tested configuration examples." msgstr "The next pages contains automatic full tested configuration examples." @@ -2054,7 +2146,7 @@ msgstr "The next pages contains automatic full tested configuration examples." msgid "The previous example used the failover command to send traffic through eth1 if eth0 fails. In this example, failover functionality is provided by rule order." msgstr "The previous example used the failover command to send traffic through eth1 if eth0 fails. In this example, failover functionality is provided by rule order." -#: ../../configexamples/index.rst:40 +#: ../../configexamples/index.rst:41 msgid "The process will do the following steps:" msgstr "The process will do the following steps:" @@ -2123,6 +2215,10 @@ msgid "This chapter contains various configuration examples:" msgstr "This chapter contains various configuration examples:" #: ../../configexamples/policy-based-ipsec-and-firewall.rst:16 +msgid "This configuration example and the requirments consists of:" +msgstr "This configuration example and the requirments consists of:" + +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:16 msgid "This configuration example and the requirments consists on:" msgstr "This configuration example and the requirments consists on:" @@ -2130,6 +2226,10 @@ msgstr "This configuration example and the requirments consists on:" msgid "This document aims to walk you through setting everything up, so at a point where you can reboot any machine and not lose more than a few seconds worth of connectivity." msgstr "This document aims to walk you through setting everything up, so at a point where you can reboot any machine and not lose more than a few seconds worth of connectivity." +#: ../../configexamples/lac-lns.rst:9 +msgid "This document is to describe a basic setup using PPPoE over L2TP. LAC and LNS are components of the broadband topology. LAC - L2TP access concentrator LNS - L2TP Network Server LAC and LNS forms L2TP tunnel. LAC receives packets from PPPoE clients and forward them to LNS. LNS is the termination point that comes from PPP packets from the remote client." +msgstr "This document is to describe a basic setup using PPPoE over L2TP. LAC and LNS are components of the broadband topology. LAC - L2TP access concentrator LNS - L2TP Network Server LAC and LNS forms L2TP tunnel. LAC receives packets from PPPoE clients and forward them to LNS. LNS is the termination point that comes from PPP packets from the remote client." + #: ../../configexamples/pppoe-ipv6-basic.rst:9 msgid "This document is to describe a basic setup using PPPoE with DHCPv6-PD + SLAAC to construct a typical home network. The user can follow the steps described here to quickly setup a working network and use this as a starting point to further configure or fine-tune other settings." msgstr "This document is to describe a basic setup using PPPoE with DHCPv6-PD + SLAAC to construct a typical home network. The user can follow the steps described here to quickly setup a working network and use this as a starting point to further configure or fine-tune other settings." @@ -2166,6 +2266,10 @@ msgstr "This guide shows an example of a route-based IKEv2 site-to-site VPN to A msgid "This guide shows an example policy-based IKEv2 site-to-site VPN between two VyOS routers, and firewall configiuration." msgstr "This guide shows an example policy-based IKEv2 site-to-site VPN between two VyOS routers, and firewall configiuration." +#: ../../configexamples/policy-based-ipsec-and-firewall.rst:7 +msgid "This guide shows an example policy-based IKEv2 site-to-site VPN between two VyOS routers, and firewall configuration." +msgstr "This guide shows an example policy-based IKEv2 site-to-site VPN between two VyOS routers, and firewall configuration." + #: ../../configexamples/autotest/tunnelbroker/tunnelbroker.rst:10 msgid "This guide walks through the setup of https://www.tunnelbroker.net/ for an IPv6 Tunnel." msgstr "This guide walks through the setup of https://www.tunnelbroker.net/ for an IPv6 Tunnel." @@ -2210,6 +2314,10 @@ msgstr "This section describes verification commands for MPLS/BGP/LDP protocols msgid "This section provides configuration steps for setting up VRFs on our PE nodes including CE facing interfaces, BGP, rd and route-target import/export based on the pre-defined parameters." msgstr "This section provides configuration steps for setting up VRFs on our PE nodes including CE facing interfaces, BGP, rd and route-target import/export based on the pre-defined parameters." +#: ../../configexamples/lac-lns.rst:91 +msgid "This setup requires the Compression Control Protocol (CCP) being disabled, the command ``set vpn l2tp remote-access ppp-options disable-ccp`` accomplishes that." +msgstr "This setup requires the Compression Control Protocol (CCP) being disabled, the command ``set vpn l2tp remote-access ppp-options disable-ccp`` accomplishes that." + #: ../../configexamples/autotest/Wireguard/Wireguard.rst:10 msgid "This simple structure show how to connect two offices. One remote branch and the central office." msgstr "This simple structure show how to connect two offices. One remote branch and the central office." @@ -2580,6 +2688,10 @@ msgstr "When you have both routers up, you should be able to establish a connect msgid "When you have enabled OSPF on both routers, you should be able to see each other with the command ``show ip ospf neighbour``. The state must be 'Full' or '2-Way'. If it is not, then there is a network connectivity issue between the hosts. This is often caused by NAT or MTU issues. You should not see any new routes (unless this is the second pass) in the output of ``show ip route``" msgstr "When you have enabled OSPF on both routers, you should be able to see each other with the command ``show ip ospf neighbour``. The state must be 'Full' or '2-Way'. If it is not, then there is a network connectivity issue between the hosts. This is often caused by NAT or MTU issues. You should not see any new routes (unless this is the second pass) in the output of ``show ip route``" +#: ../../configexamples/lac-lns.rst:-1 +msgid "Window PPPoE Client Configuration" +msgstr "Window PPPoE Client Configuration" + #: ../../configexamples/autotest/OpenVPN_with_LDAP/OpenVPN_with_LDAP.rst:13 msgid "Windows Server 2019 with a running Active Directory" msgstr "Windows Server 2019 with a running Active Directory" @@ -2713,15 +2825,15 @@ msgstr "compute3 - Port 11 of each switch" msgid "compute3 (VMware ESXi 6.5)" msgstr "compute3 (VMware ESXi 6.5)" -#: ../../configexamples/index.rst:43 +#: ../../configexamples/index.rst:44 msgid "configure each host in the lab" msgstr "configure each host in the lab" -#: ../../configexamples/index.rst:42 +#: ../../configexamples/index.rst:43 msgid "create the lab on a eve-ng server" msgstr "create the lab on a eve-ng server" -#: ../../configexamples/index.rst:44 +#: ../../configexamples/index.rst:45 msgid "do some defined tests" msgstr "do some defined tests" @@ -2742,7 +2854,7 @@ msgstr "extended community and remote label of specific destination" msgid "first the PCA" msgstr "first the PCA" -#: ../../configexamples/index.rst:46 +#: ../../configexamples/index.rst:47 msgid "generate the documentation and include files" msgstr "generate the documentation and include files" @@ -2754,7 +2866,7 @@ msgstr "green uses local routing table id and VNI 4000" msgid "information between PE and CE:" msgstr "information between PE and CE:" -#: ../../configexamples/index.rst:45 +#: ../../configexamples/index.rst:46 msgid "optional do an upgrade to a higher version and do step 3 again." msgstr "optional do an upgrade to a higher version and do step 3 again." @@ -2770,7 +2882,7 @@ msgstr "router2 (Random 1RU machine with 4 NICs)" msgid "save the output to a file and import it in nearly all openvpn clients." msgstr "save the output to a file and import it in nearly all openvpn clients." -#: ../../configexamples/index.rst:47 +#: ../../configexamples/index.rst:48 msgid "shutdown and destroy the lab, if there is no error" msgstr "shutdown and destroy the lab, if there is no error" |