diff options
Diffstat (limited to 'docs/appendix/examples/azure-vpn-dual-bgp.rst')
| -rw-r--r-- | docs/appendix/examples/azure-vpn-dual-bgp.rst | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/docs/appendix/examples/azure-vpn-dual-bgp.rst b/docs/appendix/examples/azure-vpn-dual-bgp.rst index 4cbcde3b..27007709 100644 --- a/docs/appendix/examples/azure-vpn-dual-bgp.rst +++ b/docs/appendix/examples/azure-vpn-dual-bgp.rst @@ -55,7 +55,7 @@ Vyos configuration - Configure the IKE and ESP settings to match a subset of those supported by Azure: -.. code-block:: sh +.. code-block:: console set vpn ipsec esp-group AZURE compression 'disable' set vpn ipsec esp-group AZURE lifetime '3600' @@ -76,13 +76,13 @@ Vyos configuration - Enable IPsec on eth0 -.. code-block:: sh +.. code-block:: console set vpn ipsec ipsec-interfaces interface 'eth0' - Configure two VTIs with a dummy IP address each -.. code-block:: sh +.. code-block:: console set interfaces vti vti1 address '10.10.1.5/32' set interfaces vti vti1 description 'Azure Primary Tunnel' @@ -92,14 +92,14 @@ Vyos configuration - Clamp the VTI's MSS to 1350 to avoid PMTU blackholes. -.. code-block:: sh +.. code-block:: console set firewall options interface vti1 adjust-mss 1350 set firewall options interface vti2 adjust-mss 1350 - Configure the VPN tunnels -.. code-block:: sh +.. code-block:: console set vpn ipsec site-to-site peer 203.0.113.2 authentication id '198.51.100.3' set vpn ipsec site-to-site peer 203.0.113.2 authentication mode 'pre-shared-secret' @@ -127,14 +127,14 @@ Vyos configuration - **Important**: Add an interface route to reach both Azure's BGP listeners -.. code-block:: sh +.. code-block:: console set protocols static interface-route 10.0.0.4/32 next-hop-interface vti1 set protocols static interface-route 10.0.0.5/32 next-hop-interface vti2 - Configure your BGP settings -.. code-block:: sh +.. code-block:: console set protocols bgp 64499 neighbor 10.0.0.4 remote-as '65540' set protocols bgp 64499 neighbor 10.0.0.4 address-family ipv4-unicast soft-reconfiguration 'inbound' @@ -149,7 +149,7 @@ Vyos configuration - **Important**: Disable connected check, otherwise the routes learned from Azure will not be imported into the routing table. -.. code-block:: sh +.. code-block:: console set protocols bgp 64499 neighbor 10.0.0.4 disable-connected-check set protocols bgp 64499 neighbor 10.0.0.5 disable-connected-check |