diff options
Diffstat (limited to 'docs/configexamples/autotest')
| -rw-r--r-- | docs/configexamples/autotest/tunnelbroker/_include/vyos-wan_tun0.conf | 8 | ||||
| -rw-r--r-- | docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst | 13 |
2 files changed, 15 insertions, 6 deletions
diff --git a/docs/configexamples/autotest/tunnelbroker/_include/vyos-wan_tun0.conf b/docs/configexamples/autotest/tunnelbroker/_include/vyos-wan_tun0.conf index 03889ffd..ab70ccc5 100644 --- a/docs/configexamples/autotest/tunnelbroker/_include/vyos-wan_tun0.conf +++ b/docs/configexamples/autotest/tunnelbroker/_include/vyos-wan_tun0.conf @@ -1,8 +1,8 @@ -set interfaces tunnel tun0 address '2001:470:6c:779::2/64' #Tunnelbroker Client IPv6 Address +set interfaces tunnel tun0 address '2001:470:6c:779::2/64' #Tunnelbroker Client IPv6 address set interfaces tunnel tun0 description 'HE.NET IPv6 Tunnel' set interfaces tunnel tun0 encapsulation 'sit' -set interfaces tunnel tun0 remote '216.66.86.114' #Tunnelbroker Server IPv4 Address -set interfaces tunnel tun0 source-address '172.29.129.60' # Tunnelbroker Client IPv4 Address or if there is NAT the current WAN interface address +set interfaces tunnel tun0 remote '216.66.86.114' #Tunnelbroker Server IPv4 address +set interfaces tunnel tun0 source-address '172.29.129.60' # Tunnelbroker Client IPv4 address. See note below set protocols static route6 ::/0 interface tun0 @@ -10,4 +10,4 @@ set interface ethernet eth2 address '2001:470:6d:778::1/64' # Tunnelbroker Route set service router-advert interface eth2 name-server '2001:470:20::2' set service router-advert interface eth2 prefix 2001:470:6d:778::/64 # Tunnelbroker Routed /64 prefix -set system name-server 2001:470:20::2 #Tunnelbroker DNS Server
\ No newline at end of file +set system name-server 2001:470:20::2 #Tunnelbroker DNS Server diff --git a/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst b/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst index 96c2e1af..5bfcb642 100644 --- a/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst +++ b/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst @@ -48,7 +48,15 @@ Now we are able to setup the tunnel interface. :language: none :lines: 1-5 -Setup the ipv6 default route to the tunnel interface +.. note:: The `source-address` is the Tunnelbroker client IPv4 + address or if there is NAT the current WAN interface address. + + If `source-address` is dynamic, the tunnel will cease working once + the address changes. To avoid having to manually update + `source-address` each time the dynamic IP changes, an address of + '0.0.0.0' can be specified. + +Setup the IPv6 default route to the tunnel interface .. literalinclude:: _include/vyos-wan_tun0.conf :language: none @@ -204,4 +212,5 @@ instead of `set firewall name NAME`, you would use `set firewall ipv6-name NAME`. Similarly, to attach the firewall, you would use `set interfaces ethernet eth0 -firewall in ipv6-name` or `et firewall zone LOCAL from WAN firewall ipv6-name`.
\ No newline at end of file +firewall in ipv6-name` or `set firewall zone LOCAL from WAN firewall +ipv6-name`. |