diff options
Diffstat (limited to 'docs/configexamples')
| -rw-r--r-- | docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst b/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst index 194fbbad..a14a3199 100644 --- a/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst +++ b/docs/configexamples/autotest/tunnelbroker/tunnelbroker.rst @@ -64,6 +64,7 @@ Setup the IPv6 default route to the tunnel interface Now you should be able to ping a public IPv6 Address +.. stop_vyoslinter .. code-block:: none @@ -73,11 +74,13 @@ Now you should be able to ping a public IPv6 Address 64 bytes from 2001:470:20::2: icmp_seq=2 ttl=64 time=43.9 ms 64 bytes from 2001:470:20::2: icmp_seq=3 ttl=64 time=43.4 ms 64 bytes from 2001:470:20::2: icmp_seq=4 ttl=64 time=42.5 ms - + --- 2001:470:20::2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2999ms rtt min/avg/max/mdev = 33.802/40.920/43.924/4.139 ms +.. start_vyoslinter + Assuming the pings are successful, you need to add some DNS servers. Some options: @@ -88,6 +91,7 @@ Some options: You should now be able to ping something by IPv6 DNS name: +.. stop_vyoslinter .. code-block:: none @@ -97,11 +101,13 @@ You should now be able to ping something by IPv6 DNS name: 64 bytes from tunnelbroker.net (2001:470:0:63::2): icmp_seq=2 ttl=48 time=186 ms 64 bytes from tunnelbroker.net (2001:470:0:63::2): icmp_seq=3 ttl=48 time=178 ms 64 bytes from tunnelbroker.net (2001:470:0:63::2): icmp_seq=4 ttl=48 time=177 ms - + --- tunnelbroker.net ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 176.707/206.638/285.128/45.457 ms +.. start_vyoslinter + ***************** LAN Configuration @@ -151,6 +157,7 @@ This accomplishes a few things: Now the Client is able to ping a public IPv6 address +.. stop_vyoslinter .. code-block:: none @@ -160,11 +167,13 @@ Now the Client is able to ping a public IPv6 address 64 bytes from 2001:470:20::2: icmp_seq=2 ttl=63 time=41.8 ms 64 bytes from 2001:470:20::2: icmp_seq=3 ttl=63 time=41.7 ms 64 bytes from 2001:470:20::2: icmp_seq=4 ttl=63 time=47.1 ms - + --- 2001:470:20::2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3005ms rtt min/avg/max/mdev = 32.128/40.688/47.107/5.403 ms +.. start_vyoslinter + Multiple LAN/DMZ Setup ====================== @@ -186,6 +195,8 @@ In the above examples, 1,2,ffff are all chosen by you. You can use 1-ffff So, when your LAN is eth1, your DMZ is eth2, your cameras are on eth3, etc: +.. stop_vyoslinter + .. code-block:: none set interfaces ethernet eth1 address '2001:470:xxxx:1::1/64' @@ -200,6 +211,8 @@ So, when your LAN is eth1, your DMZ is eth2, your cameras are on eth3, etc: set service router-advert interface eth3 name-server '2001:470:20::2' set service router-advert interface eth3 prefix 2001:470:xxxx:3::/64 +.. start_vyoslinter + Please note, 'autonomous-flag' and 'on-link-flag' are enabled by default, 'valid-lifetime' and 'preferred-lifetime' are set to default values of 30 days and 4 hours respectively. |