diff options
Diffstat (limited to 'docs/configuration/interfaces/ethernet.rst')
| -rw-r--r-- | docs/configuration/interfaces/ethernet.rst | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/docs/configuration/interfaces/ethernet.rst b/docs/configuration/interfaces/ethernet.rst new file mode 100644 index 00000000..9311c947 --- /dev/null +++ b/docs/configuration/interfaces/ethernet.rst @@ -0,0 +1,226 @@ +.. _ethernet-interface: + +######## +Ethernet +######## + +This will be the most widely used interface on a router carrying traffic to the +real world. + +************* +Configuration +************* + +Common interface configuration +============================== + +.. cmdinclude:: /_include/interface-common-with-dhcp.txt + :var0: ethernet + :var1: eth0 + +Ethernet options +================ + +.. cfgcmd:: set interfaces ethernet <interface> duplex <auto | full | half> + + Configure physical interface duplex setting. + + * auto - interface duplex setting is auto-negotiated + * full - always use full-duplex + * half - always use half-duplex + + VyOS default will be `auto`. + +.. cfgcmd:: set interfaces ethernet <interface> speed <auto | 10 | 100 | 1000 | + 2500 | 5000 | 10000 | 25000 | 40000 | 50000 | 100000> + + Configure physical interface speed setting. + + * auto - interface speed is auto-negotiated + * 10 - 10 MBit/s + * 100 - 100 MBit/s + * 1000 - 1 GBit/s + * 2500 - 2.5 GBit/s + * 5000 - 5 GBit/s + * 10000 - 10 GBit/s + * 25000 - 25 GBit/s + * 40000 - 40 GBit/s + * 50000 - 50 GBit/s + * 100000 - 100 GBit/s + + VyOS default will be `auto`. + + +.. cfgcmd:: set interfaces ethernet <interface> mirror <interface> + + Use this command to mirror the inbound traffic from one Ethernet interface to + another interface. This feature is typically used to provide a copy of traffic + inbound on one interface to a system running a monitoring or IPS application + on another interface. The benefit of mirroring the traffic is that the + application is isolated from the source traffic and so application processing + does not affect the traffic or the system performance. + + Example: + + .. code-block:: none + + set interfaces ethernet eth0 mirror eth1 + +VLAN +==== + +Regular VLANs (802.1q) +---------------------- + +.. cmdinclude:: /_include/interface-vlan-8021q.txt + :var0: ethernet + :var1: eth0 + +QinQ (802.1ad) +-------------- + +.. cmdinclude:: /_include/interface-vlan-8021ad.txt + :var0: ethernet + :var1: eth0 + +********* +Operation +********* + +.. opcmd:: show interfaces ethernet + + Show brief interface information. + + .. code-block:: none + + vyos@vyos:~$ show interfaces ethernet + Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down + Interface IP Address S/L Description + --------- ---------- --- ----------- + eth0 172.18.201.10/24 u/u LAN + eth1 172.18.202.11/24 u/u WAN + eth2 - u/D + +.. opcmd:: show interfaces ethernet <interface> + + Show detailed information on given `<interface>` + + .. code-block:: none + + vyos@vyos:~$ show interfaces ethernet eth0 + eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 + link/ether 00:50:44:00:f5:c9 brd ff:ff:ff:ff:ff:ff + inet6 fe80::250:44ff:fe00:f5c9/64 scope link + valid_lft forever preferred_lft forever + + RX: bytes packets errors dropped overrun mcast + 56735451 179841 0 0 0 142380 + TX: bytes packets errors dropped carrier collisions + 5601460 62595 0 0 0 0 + +.. opcmd:: show interfaces ethernet <interface> physical + + Show information about physical `<interface>` + + .. code-block:: none + + vyos@vyos:~$ show interfaces ethernet eth0 physical + Settings for eth0: + Supported ports: [ TP ] + Supported link modes: 1000baseT/Full + 10000baseT/Full + Supported pause frame use: No + Supports auto-negotiation: No + Supported FEC modes: Not reported + Advertised link modes: Not reported + Advertised pause frame use: No + Advertised auto-negotiation: No + Advertised FEC modes: Not reported + Speed: 10000Mb/s + Duplex: Full + Port: Twisted Pair + PHYAD: 0 + Transceiver: internal + Auto-negotiation: off + MDI-X: Unknown + Supports Wake-on: uag + Wake-on: d + Link detected: yes + driver: vmxnet3 + version: 1.4.16.0-k-NAPI + firmware-version: + expansion-rom-version: + bus-info: 0000:0b:00.0 + supports-statistics: yes + supports-test: no + supports-eeprom-access: no + supports-register-dump: yes + supports-priv-flags: no + +.. opcmd:: show interfaces ethernet <interface> physical offload + + Show available offloading functions on given `<interface>` + + .. code-block:: none + + vyos@vyos:~$ show interfaces ethernet eth0 physical offload + rx-checksumming on + tx-checksumming on + tx-checksum-ip-generic on + scatter-gather off + tx-scatter-gather off + tcp-segmentation-offload off + tx-tcp-segmentation off + tx-tcp-mangleid-segmentation off + tx-tcp6-segmentation off + udp-fragmentation-offload off + generic-segmentation-offload off + generic-receive-offload off + large-receive-offload off + rx-vlan-offload on + tx-vlan-offload on + ntuple-filters off + receive-hashing on + tx-gre-segmentation on + tx-gre-csum-segmentation on + tx-udp_tnl-segmentation on + tx-udp_tnl-csum-segmentation on + tx-gso-partial on + tx-nocache-copy off + rx-all off + +.. opcmd:: show interfaces ethernet <interface> transceiver + + Show transceiver information from plugin modules, e.g SFP+, QSFP + + .. code-block:: none + + vyos@vyos:~$ show interfaces ethernet eth5 transceiver + Identifier : 0x03 (SFP) + Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID) + Connector : 0x07 (LC) + Transceiver codes : 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 + Transceiver type : Ethernet: 1000BASE-SX + Encoding : 0x01 (8B/10B) + BR, Nominal : 1300MBd + Rate identifier : 0x00 (unspecified) + Length (SMF,km) : 0km + Length (SMF) : 0m + Length (50um) : 550m + Length (62.5um) : 270m + Length (Copper) : 0m + Length (OM3) : 0m + Laser wavelength : 850nm + Vendor name : CISCO-FINISAR + Vendor OUI : 00:90:65 + Vendor PN : FTRJ-8519-7D-CS4 + Vendor rev : A + Option values : 0x00 0x1a + Option : RX_LOS implemented + Option : TX_FAULT implemented + Option : TX_DISABLE implemented + BR margin, max : 0% + BR margin, min : 0% + Vendor SN : FNS092xxxxx + Date code : 0506xx + |