diff options
Diffstat (limited to 'docs/configuration/interfaces/wireless.rst')
| -rw-r--r-- | docs/configuration/interfaces/wireless.rst | 49 |
1 files changed, 32 insertions, 17 deletions
diff --git a/docs/configuration/interfaces/wireless.rst b/docs/configuration/interfaces/wireless.rst index fca285eb..097d7c49 100644 --- a/docs/configuration/interfaces/wireless.rst +++ b/docs/configuration/interfaces/wireless.rst @@ -111,7 +111,8 @@ Wireless options SSID to be used in IEEE 802.11 management frames -.. cfgcmd:: set interfaces wireless <interface> type <access-point | station | monitor> +.. cfgcmd:: set interfaces wireless <interface> type + <access-point | station | monitor> Wireless device type for this interface @@ -137,7 +138,8 @@ HT (High Throughput) capabilities (802.11n) WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] -.. cfgcmd:: set interfaces wireless <interface> capabilities ht channel-set-width <ht20 | ht40+ | ht40-> +.. cfgcmd:: set interfaces wireless <interface> capabilities ht + channel-set-width <ht20 | ht40+ | ht40-> Supported channel width set. @@ -150,7 +152,8 @@ HT (High Throughput) capabilities (802.11n) Following table shows the channels that may be available for HT40- and HT40+ use per IEEE 802.11n Annex J: - Depending on the location, not all of these channels may be available for use! + Depending on the location, not all of these channels may be available for + use! .. code-block:: none @@ -163,7 +166,8 @@ HT (High Throughput) capabilities (802.11n) BSSes. These changes are done automatically when hostapd is setting up the 40 MHz channel. -.. cfgcmd:: set interfaces wireless <interface> capabilities ht delayed-block-ack +.. cfgcmd:: set interfaces wireless <interface> capabilities ht + delayed-block-ack Enable HT-delayed Block Ack ``[DELAYED-BA]`` @@ -183,15 +187,18 @@ HT (High Throughput) capabilities (802.11n) Enable L-SIG TXOP protection capability -.. cfgcmd:: set interfaces wireless <interface> capabilities ht max-amsdu <3839 | 7935> +.. cfgcmd:: set interfaces wireless <interface> capabilities ht max-amsdu + <3839 | 7935> Maximum A-MSDU length 3839 (default) or 7935 octets -.. cfgcmd:: set interfaces wireless <interface> capabilities ht short-gi <20 | 40> +.. cfgcmd:: set interfaces wireless <interface> capabilities ht + short-gi <20 | 40> Short GI capabilities for 20 and 40 MHz -.. cfgcmd:: set interfaces wireless <interface> capabilities ht smps <static | dynamic> +.. cfgcmd:: set interfaces wireless <interface> capabilities ht + smps <static | dynamic> Spatial Multiplexing Power Save (SMPS) settings @@ -210,7 +217,8 @@ VHT (Very High Throughput) capabilities (802.11ac) Number of antennas on this card -.. cfgcmd:: set interfaces wireless <interface> capabilities vht antenna-pattern-fixed +.. cfgcmd:: set interfaces wireless <interface> capabilities vht + antenna-pattern-fixed Set if antenna pattern does not change during the lifetime of an association @@ -225,15 +233,19 @@ VHT (Very High Throughput) capabilities (802.11ac) * ``multi-user-beamformer`` - Support for operation as single user beamformer * ``multi-user-beamformee`` - Support for operation as single user beamformer -.. cfgcmd:: set interfaces wireless <interface> capabilities vht center-channel-freq <freq-1 | freq-2> <number> +.. cfgcmd:: set interfaces wireless <interface> capabilities vht + center-channel-freq <freq-1 | freq-2> <number> - VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes) + VHT operating channel center frequency - center freq 1 + (for use with 80, 80+80 and 160 modes) - VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode) + VHT operating channel center frequency - center freq 2 + (for use with the 80+80 mode) <number> must be from 34 - 173. For 80 MHz channels it should be channel + 6. -.. cfgcmd:: set interfaces wireless <interface> capabilities vht channel-set-width <0 | 1 | 2 | 3> +.. cfgcmd:: set interfaces wireless <interface> capabilities vht + channel-set-width <0 | 1 | 2 | 3> * ``0`` - 20 or 40 MHz channel width (default) * ``1`` - 80 MHz channel width @@ -248,15 +260,18 @@ VHT (Very High Throughput) capabilities (802.11ac) VHT link adaptation capabilities -.. cfgcmd:: set interfaces wireless <interface> capabilities vht max-mpdu <value> +.. cfgcmd:: set interfaces wireless <interface> capabilities vht + max-mpdu <value> Increase Maximum MPDU length to 7991 or 11454 octets (default 3895 octets) -.. cfgcmd:: set interfaces wireless <interface> capabilities vht max-mpdu-exp <value> +.. cfgcmd:: set interfaces wireless <interface> capabilities vht + max-mpdu-exp <value> Set the maximum length of A-MPDU pre-EOF padding that the station can receive -.. cfgcmd:: set interfaces wireless <interface> capabilities vht short-gi <80 | 160> +.. cfgcmd:: set interfaces wireless <interface> capabilities vht + short-gi <80 | 160> Short GI capabilities @@ -440,8 +455,8 @@ information about all wireless interfaces. .. opcmd:: show interfaces wireless <wlanX> -This command shows both status and statistics on the specified wireless interface. -The wireless interface identifier can range from wlan0 to wlan999. +This command shows both status and statistics on the specified wireless +interface. The wireless interface identifier can range from wlan0 to wlan999. .. code-block:: none |