1 files changed, 77 insertions, 0 deletions
diff --git a/docs/configuration/policy/access-list.rst b/docs/configuration/policy/access-list.rst
new file mode 100644
index 00000000..41c35986
--- /dev/null
+++ b/docs/configuration/policy/access-list.rst
@@ -0,0 +1,77 @@
+##################
+Access List Policy
+##################
+
+Filtering is used for both input and output of the routing information. Once
+filtering is defined, it can be applied in any direction. VyOS makes filtering
+possible using acls and prefix lists.
+
+Basic filtering can be done using access-list and access-list6.
+
+*************
+Configuration
+*************
+
+Access Lists
+============
+
+.. cfgcmd:: set policy access-list <acl_number>
+
+   This command creates the new access list policy, where <acl_number> must be
+   a number from 1 to 2699.
+
+.. cfgcmd:: set policy access-list <acl_number> description <text>
+
+   Set description for the access list.
+
+.. cfgcmd:: set policy access-list <acl_number> rule <1-65535> action
+   <permit|deny>
+
+   This command creates a new rule in the access list and defines an action.
+
+.. cfgcmd:: set policy access-list <acl_number> rule <1-65535>
+   <destination|source> <any|host|inverse-mask|network>
+
+   This command defines matching parameters for access list rule. Matching
+   criteria could be applied to destinarion or source parameters:
+
+   * any: any IP address to match.
+   * host: single host IP address to match.
+   * inverse-match: network/netmask to match (requires network be defined).
+   * network: network/netmask to match (requires inverse-match be defined).
+
+IPv6 Access List
+================
+
+Basic filtering could also be applied to IPv6 traffic.
+
+.. cfgcmd:: set policy access-list6 <text>
+
+   This command creates the new IPv6 access list, identified by <text>
+
+.. cfgcmd:: set policy access-list6 <text> description <text>
+
+   Set description for the IPv6 access list.
+
+.. cfgcmd:: set policy access-list6 <text> rule <1-65535> action <permit|deny>
+
+   This command creates a new rule in the IPv6 access list and defines an
+   action.
+
+.. cfgcmd:: set policy access-list6 <text> rule <1-65535> source
+   <any|exact-match|network>
+
+   This command defines matching parameters for IPv6 access list rule. Matching
+   criteria could be applied to source parameters:
+
+   * any: any IPv6 address to match.
+   * exact-match: exact match of the network prefixes.
+   * network: network/netmask to match (requires inverse-match be defined) BUG,
+     NO invert-match option in access-list6
+
+
+********
+Examples
+********
+
+Examples would be uploaded soon.
+\ No newline at end of file