diff options
Diffstat (limited to 'docs/configuration/protocols')
| -rw-r--r-- | docs/configuration/protocols/bgp.rst | 27 | ||||
| -rw-r--r-- | docs/configuration/protocols/isis.rst | 28 |
2 files changed, 42 insertions, 13 deletions
diff --git a/docs/configuration/protocols/bgp.rst b/docs/configuration/protocols/bgp.rst index 737e98fa..8fc69111 100644 --- a/docs/configuration/protocols/bgp.rst +++ b/docs/configuration/protocols/bgp.rst @@ -952,7 +952,7 @@ Operational Mode Commands Show ==== -.. opcmd:: show <ip|ipv6> bgp +.. opcmd:: show bgp <ipv4|ipv6> This command displays all entries in BGP routing table. @@ -964,6 +964,7 @@ Show i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete + RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path *> 198.51.100.0/24 10.0.34.4 0 0 65004 i @@ -971,7 +972,7 @@ Show Displayed 2 routes and 2 total paths -.. opcmd:: show <ip|ipv6> bgp <address|prefix> +.. opcmd:: show bgp <ipv4|ipv6> <address|prefix> This command displays information about the particular entry in the BGP routing table. @@ -991,55 +992,55 @@ Show This command displays routes with classless interdomain routing (CIDR). -.. opcmd:: show <ip|ipv6> bgp community <value> +.. opcmd:: show bgp <ipv4|ipv6> community <value> This command displays routes that belong to specified BGP communities. Valid value is a community number in the range from 1 to 4294967200, or AA:NN (autonomous system-community number/2-byte number), no-export, local-as, or no-advertise. -.. opcmd:: show <ip|ipv6> bgp community-list <name> +.. opcmd:: show bgp <ipv4|ipv6> community-list <name> This command displays routes that are permitted by the BGP community list. -.. opcmd:: show ip bgp dampened-paths +.. opcmd:: show bgp <ipv4|ipv6> dampening dampened-paths This command displays BGP dampened routes. -.. opcmd:: show ip bgp flap-statistics +.. opcmd:: show bgp <ipv4|ipv6> dampening flap-statistics This command displays information about flapping BGP routes. -.. opcmd:: show ip bgp filter-list <name> +.. opcmd:: show bgp <ipv4|ipv6> filter-list <name> This command displays BGP routes allowed by the specified AS Path access list. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> advertised-routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> advertised-routes This command displays BGP routes advertised to a neighbor. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> received-routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> received-routes This command displays BGP routes originating from the specified BGP neighbor before inbound policy is applied. To use this command inbound soft reconfiguration must be enabled. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> routes This command displays BGP received-routes that are accepted after filtering. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> dampened-routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> dampened-routes This command displays dampened routes received from BGP neighbor. -.. opcmd:: show <ip|ipv6> bgp regexp <text> +.. opcmd:: show bgp <ipv4|ipv6> regexp <text> This command displays information about BGP routes whose AS path matches the specified regular expression. -.. opcmd:: show <ip|ipv6> bgp summary +.. opcmd:: show bgp <ipv4|ipv6> summary This command displays the status of all BGP connections. diff --git a/docs/configuration/protocols/isis.rst b/docs/configuration/protocols/isis.rst index 18a7c166..1f779d0a 100644 --- a/docs/configuration/protocols/isis.rst +++ b/docs/configuration/protocols/isis.rst @@ -302,6 +302,34 @@ Timers control the timing of the execution of SPF calculations in response to IGP events. The process described in :rfc:`8405`. +Loop Free Alternate (LFA) +------------------------- + +.. cfgcmd:: set protocols isis fast-reroute lfa remote prefix-list <name> + <level-1|level-2> + + This command enables IP fast re-routing that is part of :rfc:`5286`. + Specifically this is a prefix list which references a prefix in which + will select eligible PQ nodes for remote LFA backups. + +.. cfgcmd:: set protocols isis fast-reroute lfa local load-sharing disable + <level-1|level-2> + + This command disables the load sharing across multiple LFA backups. + +.. cfgcmd:: set protocols isis fast-reroute lfa local tiebreaker + <downstream|lowest-backup-metric|node-protecting> index <number> + <level-1|level-2> + + This command will configure a tie-breaker for multiple local LFA backups. + The lower index numbers will be processed first. + +.. cfgcmd:: set protocols isis fast-reroute lfa local priority-limit + <medium|high|critical> <level-1|level-2> + + This command will limit LFA backup computation up to the specified + prefix priority. + ******** Examples |