diff options
Diffstat (limited to 'docs/configuration/protocols')
| -rw-r--r-- | docs/configuration/protocols/pim.rst | 39 |
1 files changed, 27 insertions, 12 deletions
diff --git a/docs/configuration/protocols/pim.rst b/docs/configuration/protocols/pim.rst index 019f1e64..f3f388ba 100644 --- a/docs/configuration/protocols/pim.rst +++ b/docs/configuration/protocols/pim.rst @@ -70,12 +70,17 @@ PIM-SM - PIM Sparse Mode This command is only useful at scale when you can possibly have a large number of PIM control packets flowing. +.. stop_vyoslinter + .. cfgcmd:: set protocols pim register-accept-list <prefix-list> - When PIM receives a register packet the source of the packet will be compared - to the prefix-list specified, and if a permit is received normal processing - continues. If a deny is returned for the source address of the register packet - a register stop message is sent to the source. + When PIM receives a register packet the source of the packet will be + compared to the prefix-list specified, and if a permit is received + normal processing continues. If a deny is returned for the source + address of the register packet a register stop message is sent to + the source. + +.. start_vyoslinter .. cfgcmd:: set protocols pim register-suppress-time <n> @@ -84,9 +89,10 @@ PIM-SM - PIM Sparse Mode .. cfgcmd:: set protocols pim rp <address> group <group> - In order to use PIM, it is necessary to configure a :abbr:`RP (Rendezvous Point)` - for join messages to be sent to. Currently the only methodology to do this is - via static rendezvous point commands. + In order to use PIM, it is necessary to configure a + :abbr:`RP (Rendezvous Point)` for join messages to be sent to. + Currently the only methodology to do this is via static rendezvous + point commands. All routers in the PIM network must agree on these values. @@ -115,14 +121,19 @@ PIM-SM - PIM Sparse Mode nexthops in it's decision for :abbr:`RPF (Reverse Path Forwarding)` lookup if this option is not set (default). +.. stop_vyoslinter + .. cfgcmd:: set protocols pim spt-switchover infinity-and-beyond [prefix-list <list>] - On the last hop router if it is desired to not switch over to the SPT tree - configure this command. + On the last hop router if it is desired to not switch over to the + SPT tree configure this command. - Optional parameter prefix-list can be use to control which groups to switch or - not switch. If a group is PERMIT as per the prefix-list, then the SPT switchover - does not happen for it and if it is DENY, then the SPT switchover happens. + Optional parameter prefix-list can be use to control which groups + to switch or not switch. If a group is PERMIT as per the + prefix-list, then the SPT switchover does not happen for it and if + it is DENY, then the SPT switchover happens. + +.. start_vyoslinter .. cfgcmd:: set protocols pim ssm prefix-list <list> @@ -206,6 +217,8 @@ Interface specific commands not returned in the specified time, it will be assumed the (S,G) or (\*,G) state :rfc:`7761#section-4.1` has timed out. +.. stop_vyoslinter + .. cfgcmd:: set protocols pim interface <interface> igmp version <version-number> Use this command to define in the selected interface whether you @@ -213,6 +226,8 @@ Interface specific commands The default value is 3. +.. start_vyoslinter + Example ------- |