6 files changed, 20 insertions, 21 deletions
diff --git a/docs/configuration/firewall/bridge.rst b/docs/configuration/firewall/bridge.rst
index bcde7beb..f84fd456 100644
--- a/docs/configuration/firewall/bridge.rst
+++ b/docs/configuration/firewall/bridge.rst
@@ -157,8 +157,8 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall bridge forward filter enable-default-log
-.. cfgcmd:: set firewall bridge name <name> enable-default-log
+.. cfgcmd:: set firewall bridge forward filter default-log
+.. cfgcmd:: set firewall bridge name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
@@ -325,7 +325,7 @@ Configuration example:
 .. code-block:: none
 
    set firewall bridge forward filter default-action 'drop'
-   set firewall bridge forward filter enable-default-log
+   set firewall bridge forward filter default-log
    set firewall bridge forward filter rule 10 action 'continue'
    set firewall bridge forward filter rule 10 inbound-interface name 'eth2'
    set firewall bridge forward filter rule 10 vlan id '22'
@@ -341,7 +341,7 @@ Configuration example:
    set firewall bridge forward filter rule 40 destination mac-address '66:55:44:33:22:11'
    set firewall bridge forward filter rule 40 source mac-address '11:22:33:44:55:66'
    set firewall bridge name TEST default-action 'accept'
-   set firewall bridge name TEST enable-default-log
+   set firewall bridge name TEST default-log
    set firewall bridge name TEST rule 10 action 'continue'
    set firewall bridge name TEST rule 10 log
    set firewall bridge name TEST rule 10 vlan priority '0'
diff --git a/docs/configuration/firewall/ipv4.rst b/docs/configuration/firewall/ipv4.rst
index 5544ea95..a9459f00 100644
--- a/docs/configuration/firewall/ipv4.rst
+++ b/docs/configuration/firewall/ipv4.rst
@@ -206,10 +206,10 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall ipv4 forward filter enable-default-log
-.. cfgcmd:: set firewall ipv4 input filter enable-default-log
-.. cfgcmd:: set firewall ipv4 output filter enable-default-log
-.. cfgcmd:: set firewall ipv4 name <name> enable-default-log
+.. cfgcmd:: set firewall ipv4 forward filter default-log
+.. cfgcmd:: set firewall ipv4 input filter default-log
+.. cfgcmd:: set firewall ipv4 output filter default-log
+.. cfgcmd:: set firewall ipv4 name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst
index 236bdead..4b695f74 100644
--- a/docs/configuration/firewall/ipv6.rst
+++ b/docs/configuration/firewall/ipv6.rst
@@ -206,10 +206,10 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall ipv6 forward filter enable-default-log
-.. cfgcmd:: set firewall ipv6 input filter enable-default-log
-.. cfgcmd:: set firewall ipv6 output filter enable-default-log
-.. cfgcmd:: set firewall ipv6 name <name> enable-default-log
+.. cfgcmd:: set firewall ipv6 forward filter default-log
+.. cfgcmd:: set firewall ipv6 input filter default-log
+.. cfgcmd:: set firewall ipv6 output filter default-log
+.. cfgcmd:: set firewall ipv6 name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
@@ -1177,7 +1177,7 @@ Example Partial Config
               }
               name INP-ETH1 {
                   default-action drop
-                  enable-default-log
+                  default-log
                   rule 10 {
                       action accept
                       protocol tcp_udp
diff --git a/docs/configuration/policy/route.rst b/docs/configuration/policy/route.rst
index 1a85ffc6..45975774 100644
--- a/docs/configuration/policy/route.rst
+++ b/docs/configuration/policy/route.rst
@@ -19,8 +19,8 @@ from 1 - 999999, at the first match the action of the rule will be executed.
 
    Provide a rule-set description.
 
-.. cfgcmd:: set policy route <name> enable-default-log
-.. cfgcmd:: set policy route6 <name> enable-default-log
+.. cfgcmd:: set policy route <name> default-log
+.. cfgcmd:: set policy route6 <name> default-log
 
    Option to log packets hitting default-action.
 
@@ -271,4 +271,4 @@ setting a different routing table.
 .. cfgcmd:: set policy route <name> rule <n> set tcp-mss <500-1460>
 .. cfgcmd:: set policy route6 <name> rule <n> set tcp-mss <500-1460>
 
-   Set packet modifications: Explicitly set TCP Maximum segment size value.
-\ No newline at end of file
+   Set packet modifications: Explicitly set TCP Maximum segment size value.
diff --git a/docs/configuration/service/ntp.rst b/docs/configuration/service/ntp.rst
index e7ee392b..266376cf 100644
--- a/docs/configuration/service/ntp.rst
+++ b/docs/configuration/service/ntp.rst
@@ -46,9 +46,9 @@ Configuration
 
    There are 3 default NTP server set. You are able to change them.
 
-   * ``0.pool.ntp.org``
-   * ``1.pool.ntp.org``
-   * ``2.pool.ntp.org``
+   * ``time1.vyos.net``
+   * ``time2.vyos.net``
+   * ``time3.vyos.net``
 
 .. cfgcmd:: set service ntp server <address> <noselect | nts | pool | prefer>
 
@@ -85,7 +85,7 @@ Configuration
 
 .. cfgcmd:: set service ntp leap-second [ignore|smear|system|timezone]
 
-   Define how to handle leaf-seonds.
+   Define how to handle leap-seconds.
 
    * `ignore`: No correction is applied to the clock for the leap second. The
      clock will be corrected later in normal operation when new measurements are
diff --git a/docs/configuration/service/pppoe-server.rst b/docs/configuration/service/pppoe-server.rst
index b00d941f..d9a16036 100644
--- a/docs/configuration/service/pppoe-server.rst
+++ b/docs/configuration/service/pppoe-server.rst
@@ -24,7 +24,6 @@ Configuring PPPoE Server
   set service pppoe-server authentication local-users username test password 'test'
   set service pppoe-server client-ip-pool PPPOE-POOL range 192.168.255.2-192.168.255.254
   set service pppoe-server default-pool 'PPPOE-POOL'
-  set service pppoe-server outside-address 192.0.2.2
   set service pppoe-server gateway-address 192.168.255.1
   set service pppoe-server interface eth0