5 files changed, 7 insertions, 7 deletions
diff --git a/docs/configuration/highavailability/index.rst b/docs/configuration/highavailability/index.rst
index 2f20e783..7f06faa8 100644
--- a/docs/configuration/highavailability/index.rst
+++ b/docs/configuration/highavailability/index.rst
@@ -450,7 +450,7 @@ Port "0" is required if multiple ports are used.
   set high-availability virtual-server vyos real-server 192.0.2.12 health-check script '/config/scripts/check-real-server-second.sh'
   set high-availability virtual-server vyos real-server 192.0.2.12 port '0'
 
-  set nat source rule 100 outbound-interface 'eth0'
+  set nat source rule 100 outbound-interface name 'eth0'
   set nat source rule 100 source address '192.0.2.0/24'
   set nat source rule 100 translation address 'masquerade'
 
diff --git a/docs/configuration/nat/nat44.rst b/docs/configuration/nat/nat44.rst
index b42c6cfe..98b230a9 100644
--- a/docs/configuration/nat/nat44.rst
+++ b/docs/configuration/nat/nat44.rst
@@ -663,7 +663,7 @@ We will use source and destination address for hash generation.
 
 .. code-block:: none
 
-  set nat destination rule 10 inbound-interface inbound-interface eth0
+  set nat destination rule 10 inbound-interface name eth0
   set nat destination rule 10 protocol tcp
   set nat destination rule 10 destination port 80
   set nat destination rule 10 load-balance hash source-address
diff --git a/docs/configuration/vpn/l2tp.rst b/docs/configuration/vpn/l2tp.rst
index 6ea1cc7d..26de47b3 100644
--- a/docs/configuration/vpn/l2tp.rst
+++ b/docs/configuration/vpn/l2tp.rst
@@ -60,7 +60,7 @@ To allow VPN-clients access via your external address, a NAT rule is required:
 
 .. code-block:: none
 
-  set nat source rule 110 outbound-interface 'eth0'
+  set nat source rule 110 outbound-interface name 'eth0'
   set nat source rule 110 source address '192.168.255.0/24'
   set nat source rule 110 translation address masquerade
 
diff --git a/docs/configuration/vpn/site2site_ipsec.rst b/docs/configuration/vpn/site2site_ipsec.rst
index 2b3403f5..8c0af774 100644
--- a/docs/configuration/vpn/site2site_ipsec.rst
+++ b/docs/configuration/vpn/site2site_ipsec.rst
@@ -245,13 +245,13 @@ If there is SNAT rules on eth1, need to add exclude rule
   # server side
   set nat source rule 10 destination address '10.0.0.0/24'
   set nat source rule 10 'exclude'
-  set nat source rule 10 outbound-interface 'eth1'
+  set nat source rule 10 outbound-interface name 'eth1'
   set nat source rule 10 source address '192.168.0.0/24'
 
   # remote office side
   set nat source rule 10 destination address '192.168.0.0/24'
   set nat source rule 10 'exclude'
-  set nat source rule 10 outbound-interface 'eth1'
+  set nat source rule 10 outbound-interface name 'eth1'
   set nat source rule 10 source address '10.0.0.0/24'
 
 To allow traffic to pass through to clients, you need to add the following
diff --git a/docs/configuration/vrf/index.rst b/docs/configuration/vrf/index.rst
index dea53321..7a50bfb2 100644
--- a/docs/configuration/vrf/index.rst
+++ b/docs/configuration/vrf/index.rst
@@ -295,11 +295,11 @@ Configuration
 
     set nat destination rule 110 description 'NAT ssh- INSIDE'
     set nat destination rule 110 destination port '2022'
-    set nat destination rule 110 inbound-interface 'eth0'
+    set nat destination rule 110 inbound-interface name 'eth0'
     set nat destination rule 110 protocol 'tcp'
     set nat destination rule 110 translation address '192.168.130.40'
 
-    set nat source rule 100 outbound-interface 'eth0'
+    set nat source rule 100 outbound-interface name 'eth0'
     set nat source rule 100 protocol 'all'
     set nat source rule 100 source address '192.168.130.0/24'
     set nat source rule 100 translation address 'masquerade'