2 files changed, 30 insertions, 1 deletions
diff --git a/docs/configuration/interfaces/tunnel.rst b/docs/configuration/interfaces/tunnel.rst
index 6a5fb171..eac74d91 100644
--- a/docs/configuration/interfaces/tunnel.rst
+++ b/docs/configuration/interfaces/tunnel.rst
@@ -18,7 +18,7 @@ a closer look at the protocols and options currently supported by VyOS.
 Common interface configuration
 ------------------------------
 
-.. cmdinclude:: /_include/interface-common-without-dhcp.txt
+.. cmdinclude:: /_include/interface-common-without-dhcp1.txt
    :var0: tunnel
    :var1: tun0
 
diff --git a/docs/configuration/policy/examples.rst b/docs/configuration/policy/examples.rst
index 2d44f4bc..f52a7950 100644
--- a/docs/configuration/policy/examples.rst
+++ b/docs/configuration/policy/examples.rst
@@ -182,3 +182,32 @@ Add multiple source IP in one rule with same priority
   set policy local-route rule 101 source '203.0.113.253'
   set policy local-route rule 101 source '198.51.100.0/24'
 
+###########################
+Clamp MSS for a specific IP
+###########################
+
+This example shows how to target an MSS clamp (in our example to 1360 bytes) 
+to a specific destination IP.
+
+.. code-block:: none
+
+  set policy route IP-MSS-CLAMP rule 10 description 'Clamp TCP session MSS to 1360 for 198.51.100.30'
+  set policy route IP-MSS-CLAMP rule 10 destination address '198.51.100.30/32'
+  set policy route IP-MSS-CLAMP rule 10 protocol 'tcp'
+  set policy route IP-MSS-CLAMP rule 10 set tcp-mss '1360'
+  set policy route IP-MSS-CLAMP rule 10 tcp flags 'SYN'
+
+To apply this policy to the correct interface, configure it on the 
+interface the inbound local host will send through to reach our 
+destined target host (in our example eth1).
+
+.. code-block:: none
+
+  set interfaces ethernet eth1 policy route IP-MSS-CLAMP
+
+You can view that the policy is being correctly (or incorrectly) utilised
+with the following command:
+
+.. code-block:: none
+
+  show policy route statistics