diff options
Diffstat (limited to 'docs/services')
| -rw-r--r-- | docs/services/index.rst | 1 | ||||
| -rw-r--r-- | docs/services/sstp-server.rst | 262 |
2 files changed, 0 insertions, 263 deletions
diff --git a/docs/services/index.rst b/docs/services/index.rst index e0773090..ed00a29b 100644 --- a/docs/services/index.rst +++ b/docs/services/index.rst @@ -17,7 +17,6 @@ This chapter describes the available system/network services provided by VyOS. mdns-repeater ipoe-server pppoe-server - sstp-server udp-broadcast-relay snmp ssh diff --git a/docs/services/sstp-server.rst b/docs/services/sstp-server.rst deleted file mode 100644 index 6e311e19..00000000 --- a/docs/services/sstp-server.rst +++ /dev/null @@ -1,262 +0,0 @@ -.. _sstp_server: - -########### -SSTP Server -########### - -:abbr:`SSTP (Secure Socket Tunneling Protocol)` is a form of :abbr:`VPN -(Virtual Private Network)` tunnel that provides a mechanism to transport PPP -traffic through an SSL/TLS channel. SSL/TLS provides transport-level security -with key negotiation, encryption and traffic integrity checking. The use of -SSL/TLS over TCP port 443 allows SSTP to pass through virtually all firewalls -and proxy servers except for authenticated web proxies. - -SSTP is available for Linux, BSD, and Windows. - -VyOS utilizes accel-ppp_ to provide SSTP server functionality. We support both -local and RADIUS authentication. - -As SSTP provides PPP via a SSL/TLS channel the use of either publically signed -certificates as well as a private PKI is required. - -.. note:: All certificates should be stored on VyOS under - ``/config/user-data/sstp``. If certificates are not stored unt ``/config`` - they will not be migrated during a software update. - -Self Signed CA and Certificates -=============================== - -To generate the CA, the server private key and certificates the following -commands can be used. - -.. code-block:: none - - - vyos@vyos:~$ mkdir -p /config/user-data/sstp - vyos@vyos:~$ openssl req -newkey rsa:4096 -new -nodes -x509 -days 3650 -keyout /config/user-data/sstp/server.key -out /config/user-data/sstp/server.crt - - Generating a 4096 bit RSA private key - .........................++ - ...............................................................++ - writing new private key to 'server.key' - [...] - Country Name (2 letter code) [AU]: - State or Province Name (full name) [Some-State]: - Locality Name (eg, city) []: - Organization Name (eg, company) [Internet Widgits Pty Ltd]: - Organizational Unit Name (eg, section) []: - Common Name (e.g. server FQDN or YOUR name) []: - Email Address []: - - vyos@vyos:~$ openssl req -new -x509 -key /config/user-data/sstp/server.key -out /config/user-data/sstp/ca.crt - [...] - Country Name (2 letter code) [AU]: - State or Province Name (full name) [Some-State]: - Locality Name (eg, city) []: - Organization Name (eg, company) [Internet Widgits Pty Ltd]: - Organizational Unit Name (eg, section) []: - Common Name (e.g. server FQDN or YOUR name) []: - Email Address []: - - -Configuration -============= - -.. cfgcmd:: set service sstp-server authentication local-users username <user> password <pass> - - Create `<user>` for local authentication on this system. The users password - will be set to `<pass>`. - -.. cfgcmd:: set service sstp-server authentication protocols <pap | chap | mschap | mschap-v2> - - Require the peer to authenticate itself using one of the following protocols: - pap, chap, mschap, mschap-v2. - -.. cfgcmd:: set service sstp-server authentication mode <local | radius> - - Set authentication backend. The configured authentication backend is used - for all queries. - - * **radius**: All authentication queries are handled by a configured RADIUS - server. - * **local**: All authentication queries are handled locally. - - -.. cfgcmd:: set service sstp-server network-settings client-ip-settings gateway-address <gateway> - - Specifies single `<gateway>` IP address to be used as local address of PPP - interfaces. - - -.. cfgcmd:: set service sstp-server network-settings client-ip-settings subnet <subnet> - - Use `<subnet>` as the IP pool for all connecting clients. - - -.. cfgcmd:: set service sstp-server network-settings dns-server primary-dns <address> - - Connected client should use `<address>` as their primary DNS server. - - -.. cfgcmd:: set service sstp-server network-settings dns-server secondary-dns <address> - - Connected client should use `<address>` as their secondary DNS server. - -SSL Certificates ----------------- - -.. cfgcmd:: set service sstp-server sstp-settings ssl-certs ca <file> - - Path to `<file>` pointing to the certificate authority certificate. - -.. cfgcmd:: set service sstp-server sstp-settings ssl-certs server-cert <file> - - Path to `<file>` pointing to the servers certificate (public portion). - -.. cfgcmd:: set service sstp-server sstp-settings ssl-certs server-key <file> - - Path to `<file>` pointing to the servers certificate (private portion). - -PPP Settings ------------- - -.. cfgcmd:: set service sstp-server ppp-settings lcp-echo-failure <number> - - Defines the maximum `<number>` of unanswered echo requests. Upon reaching the - value `<number>`, the session will be reset. - -.. cfgcmd:: set service sstp-server ppp-settings lcp-echo-interval <interval> - - If this option is specified and is greater than 0, then the PPP module will - send LCP pings of the echo request every `<interval>` seconds. - -.. cfgcmd:: set service sstp-server ppp-settings lcp-echo-timeout - - Specifies timeout in seconds to wait for any peer activity. If this option - specified it turns on adaptive lcp echo functionality and "lcp-echo-failure" - is not used. - -.. cfgcmd:: set service sstp-server ppp-settings mppe <require | prefer | deny> - - Specifies :abbr:`MPPE (Microsoft Point-to-Point Encryption)` negotioation - preference. - - * **require** - ask client for mppe, if it rejects drop connection - * **prefer** - ask client for mppe, if it rejects don't fail - * **deny** - deny mppe - - Default behavior - don't ask client for mppe, but allow it if client wants. - Please note that RADIUS may override this option by MS-MPPE-Encryption-Policy - attribute. - - -RADIUS ------- - -Server -^^^^^^ - -.. cfgcmd:: set service sstp-server authentication radius-server <server> secret <secret> - - Configure RADIUS `<server>` and its required shared `<secret>` for - communicating with the RADIUS server. - -.. cfgcmd:: set service sstp-server authentication radius-server <server> secret <secret> - - Configure RADIUS `<server>` and its required shared `<secret>` for - communicating with the RADIUS server. - -.. cfgcmd:: set service sstp-server authentication radius-server <server> fail-time <time> - - Mark RADIUS server as offline for this given `<time>` in seconds. - -.. cfgcmd:: set service sstp-server authentication radius-server <server> req-limit <limit> - - Maximum number of simultaneous requests to RADIUS server, default is - unlimited. - -Options -^^^^^^^ - -.. cfgcmd:: set service sstp-server authentication radius-settings acct-timeout - - Timeout to wait reply for Interim-Update packets. (default 3 seconds) - - -.. cfgcmd:: set service sstp-server authentication radius-settings dae-server ip-address <address> - - Specifies IP address for Dynamic Authorization Extension server (DM/CoA) - - -.. cfgcmd:: set service sstp-server authentication radius-settings dae-server port <port> - - Port for Dynamic Authorization Extension server (DM/CoA) - - -.. cfgcmd:: set service sstp-server authentication radius-settings dae-server secret <secret> - - Secret for Dynamic Authorization Extension server (DM/CoA) - - -.. cfgcmd:: set service sstp-server authentication radius-settings max-try <number> - - Maximum number of tries to send Access-Request/Accounting-Request queries - - -.. cfgcmd:: set service sstp-server authentication radius-settings timeout <timeout> - - Timeout to wait response from server (seconds) - - -.. cfgcmd:: set service sstp-server authentication radius-settings nas-identifier <identifier> - - Value to send to RADIUS server in NAS-Identifier attribute and to be matched - in DM/CoA requests. - - -.. cfgcmd:: set service sstp-server authentication radius-settings nas-ip-address <address> - - Value to send to RADIUS server in NAS-IP-Address attribute and to be matched - in DM/CoA requests. Also DM/CoA server will bind to that address. - - -.. cfgcmd:: set service sstp-server authentication radius-settings rate-limit attribute <attribute> - - Specifies which RADIUS server attribute contains the rate limit information. - The default attribute is `Filter-Id`. - - -.. cfgcmd:: set service sstp-server authentication radius-settings rate-limit enable - - Enables bandwidth shaping via RADIUS. - - -.. cfgcmd:: set service sstp-server authentication radius-settings rate-limit vendor - - Specifies the vendor dictionary, dictionary needs to be in - /usr/share/accel-ppp/radius. - - - -Example -======= - -* Use local user `foo` with password `bar` -* Client IP addresses will be provided from pool `192.0.2.0/24` - -Use <tab> to setup the ``set sstp-settings ssl-certs ...``, it automatically -looks for all files and directories in ``/config/user-data/sstp``. - -.. code-block:: none - - set service sstp-server authentication local-users username foo password 'bar' - set service sstp-server authentication mode 'local' - set service sstp-server network-settings client-ip-settings gateway-address '192.0.2.0' - set service sstp-server network-settings client-ip-settings subnet '192.0.2.0/24' - set service sstp-server network-settings dns-server primary-dns '10.100.100.1' - set service sstp-server network-settings dns-server secondary-dns '10.200.100.1' - set service sstp-server sstp-settings ssl-certs ca 'ca.crt' - set service sstp-server sstp-settings ssl-certs server-cert 'server.crt' - set service sstp-server sstp-settings ssl-certs server-key 'server.key' - -.. include:: ../common-references.rst |