diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/contributing/development.rst | 1 | ||||
| -rw-r--r-- | docs/firewall.rst | 4 | ||||
| -rw-r--r-- | docs/interfaces/pppoe.rst | 22 |
3 files changed, 18 insertions, 9 deletions
diff --git a/docs/contributing/development.rst b/docs/contributing/development.rst index 93168366..4a181499 100644 --- a/docs/contributing/development.rst +++ b/docs/contributing/development.rst @@ -694,6 +694,7 @@ Kernel boot parameters CLI. In this circumstance, the kernel boot parameter ``vyos-config-debug`` will ensure access to the system as user ``vyos``, and will log a Python stack trace to the file ``/tmp/boot-config-trace``. + File ``boot-config-trace`` will generate only if config loaded with a failure status. Debugging features ------------------ diff --git a/docs/firewall.rst b/docs/firewall.rst index 27dd11fd..7b6be614 100644 --- a/docs/firewall.rst +++ b/docs/firewall.rst @@ -405,9 +405,9 @@ There are a lot of matching criteria gainst which the package can be tested. set firewall name WAN-IN-v4 rule 13 tcp flags 'SYN,!ACK,!FIN,!RST' .. cfgcmd:: set firewall name <name> rule <1-9999> state [established | - invalid | new | releated] + invalid | new | related] [enable | disable ] .. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> state [established | - invalid | new | releated] + invalid | new | related] [enable | disable ] Match against the state of a packet. diff --git a/docs/interfaces/pppoe.rst b/docs/interfaces/pppoe.rst index 21af40f8..d58943b8 100644 --- a/docs/interfaces/pppoe.rst +++ b/docs/interfaces/pppoe.rst @@ -173,9 +173,17 @@ Prefix Delegation (DHCPv6-PD) VyOS 1.3 (equuleus) supports DHCPv6-PD. DHCPv6 Prefix Delegation is supported by most ISPs who provide native IPv6 for consumers on fixed networks. -.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option delegate <prefix-interface> interfaces-id <id> +.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option prefix-delegation length <length> - This statement specifies the interface id. ID must be a decimal integer. + Some ISPs by default only delegate a /64 prefix. To request for a specific + prefix size use this option to request for a bigger delegation. This value + is in the range from 32 - 64 so you could request up to /32 down to a /64 + delegation. + +.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option prefix-delegation interface <prefix-interface> address <local-addr> + + This statement specifies the interface address used locally on the interfcae + where the prefix has been delegated to. ID must be a decimal integer. It will be combined with the delegated prefix and the sla-id to form a complete interface address. The default is to use the EUI-64 address of the interface. @@ -185,7 +193,7 @@ by most ISPs who provide native IPv6 for consumers on fixed networks. Using `<id>` value 65535 will assign IPv6 address <prefix>::ffff to the interface. -.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option delegate <prefix-interface> sla-id <id> +.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option prefix-delegation interface <prefix-interface> sla-id <id> This statement specifies the identifier value of the site-level aggregator (SLA) on the interface. ID must be a decimal number greater then 0 which @@ -194,7 +202,7 @@ by most ISPs who provide native IPv6 for consumers on fixed networks. the two values into a single IPv6 prefix, 2001:db8:ffff:1::/64, and will configure the prefix on the specified interface. -.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option delegate <prefix-interface> sla-len <len> +.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option prefix-delegation interface <prefix-interface> sla-len <len> This statement specifies the length of the SLA ID in bits. `<len>` must be a decimal number between 0 and 128. If the length is not specified by this @@ -316,9 +324,9 @@ If you do not know the prefix size delegated to you, start with sla-len 0. set interfaces pppoe pppoe0 authentication user vyos set interfaces pppoe pppoe0 authentication password vyos - set interfaces pppoe pppoe0 dhcpv6-options delegate eth0 interface-id 65535 - set interfaces pppoe pppoe0 dhcpv6-options delegate eth0 sla-id 0 - set interfaces pppoe pppoe0 dhcpv6-options delegate eth0 sla-len 8 + set interfaces pppoe pppoe0 dhcpv6-options prefix-delegation interface eth0 address 65535 + set interfaces pppoe pppoe0 dhcpv6-options prefix-delegation interface eth0 sla-id 0 + set interfaces pppoe pppoe0 dhcpv6-options prefix-delegation interface eth0 sla-len 8 set interfaces pppoe pppoe0 ipv6 address autoconf set interfaces pppoe pppoe0 ipv6 enable set interfaces pppoe pppoe0 source-interface eth1 |