diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/configuration/interfaces/bridge.rst | 12 |
1 files changed, 7 insertions, 5 deletions
diff --git a/docs/configuration/interfaces/bridge.rst b/docs/configuration/interfaces/bridge.rst index 7f49f9a8..2374da4d 100644 --- a/docs/configuration/interfaces/bridge.rst +++ b/docs/configuration/interfaces/bridge.rst @@ -1,3 +1,5 @@ +:lastproofread: 2021-06-30 + .. _bridge-interface: ###### @@ -48,7 +50,7 @@ Member Interfaces and a cost, that is used to decide which is the shortest path to forward a packet. The lowest cost path is always used unless the other path is down. If you have multiple bridges and interfaces then - you may need to adjust the priorities to achieve optimium + you may need to adjust the priorities to achieve optimum performance. @@ -71,7 +73,7 @@ Bridge Options Bridge maximum aging `<time>` in seconds (default: 20). - If a another bridge in the spanning tree does not send out a hello + If an another bridge in the spanning tree does not send out a hello packet for a long period of time, it is assumed to be dead. .. cfgcmd:: set interfaces bridge <interface> igmp querier @@ -98,8 +100,8 @@ links providing fault tolerance if an active link fails. Spanning Tree Protocol forwarding `<delay>` in seconds (default: 15). - Forwarding delay time is the time spent in each of the Listening and - Learning states before the Forwarding state is entered. This delay is + The forwarding delay time is the time spent in each of the listening and + learning states before the Forwarding state is entered. This delay is so that when a new bridge comes onto a busy network it looks at some traffic before participating. @@ -183,7 +185,7 @@ Examples Create a basic bridge ===================== -Creating a bridge interface is very simple. In this example we will +Creating a bridge interface is very simple. In this example, we will have: * A bridge named `br100` |