From 316586442b4699275a508df663793954c5f9a90b Mon Sep 17 00:00:00 2001 From: rebortg Date: Tue, 31 Jan 2023 21:06:59 +0100 Subject: l2tp: sync branches --- docs/configuration/vpn/l2tp.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/configuration/vpn/l2tp.rst b/docs/configuration/vpn/l2tp.rst index 0df5080c..3418b66c 100644 --- a/docs/configuration/vpn/l2tp.rst +++ b/docs/configuration/vpn/l2tp.rst @@ -26,7 +26,7 @@ with native Windows and Mac VPN clients): set vpn l2tp remote-access authentication mode local set vpn l2tp remote-access authentication local-users username test password 'test' -In the example above an external IP of 192.0.2.2 is assumed. +In the above example, an external IP of 192.0.2.2 is assumed. If a local firewall policy is in place on your external interface you will need to allow the ports below: @@ -162,7 +162,7 @@ servers can be setup and will be used subsequentially. RADIUS source address ^^^^^^^^^^^^^^^^^^^^^ -If you are using OSPF as IGP always the closets interface connected to the +If you are using OSPF as IGP, always the closest interface connected to the RADIUS server is used. With VyOS 1.2 you can bind all outgoing RADIUS requests to a single source IP e.g. the loopback interface. @@ -174,7 +174,7 @@ Above command will use `10.0.0.3` as source IPv4 address for all RADIUS queries on this NAS. .. note:: The ``source-address`` must be configured on one of VyOS interface. - Best proctice would be a loopback or dummy interface. + Best practice would be a loopback or dummy interface. RADIUS bandwidth shaping attribute ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -- cgit v1.2.3