From e45d08411b7a9197afe60630695150b44c87b174 Mon Sep 17 00:00:00 2001 From: Yuriy Andamasov Date: Thu, 14 May 2026 03:01:40 +0300 Subject: docs: re-wrap interface-disable-flow-control.txt to fit 80-char limit (doc-lint) --- docs/_include/interface-disable-flow-control.txt | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'docs/_include') diff --git a/docs/_include/interface-disable-flow-control.txt b/docs/_include/interface-disable-flow-control.txt index 718a8984..17267efd 100644 --- a/docs/_include/interface-disable-flow-control.txt +++ b/docs/_include/interface-disable-flow-control.txt @@ -1,16 +1,17 @@ .. cfgcmd:: set interfaces {{ var0 }} {{ var2 }} {{ var3 }} disable-flow-control - Ethernet flow control is a mechanism for temporarily stopping the transmission - of data on Ethernet family computer networks. The goal of this mechanism is to - ensure zero packet loss in the presence of network congestion. + Ethernet flow control is a mechanism for temporarily stopping the + transmission of data on Ethernet family computer networks. The goal of + this mechanism is to ensure zero packet loss in the presence of network + congestion. The first flow control mechanism, the pause frame, was defined by the IEEE 802.3x standard. - A sending station (computer or network switch) may be transmitting data faster - than the other end of the link can accept it. Using flow control, the - receiving station can signal the sender requesting suspension of + A sending station (computer or network switch) may be transmitting data + faster than the other end of the link can accept it. Using flow control, + the receiving station can signal the sender requesting suspension of transmissions until the receiver catches up. Use this command to disable the generation of Ethernet flow control (pause -- cgit v1.2.3