From 711d71329f0e35cc78f39042deec02d0624ff00c Mon Sep 17 00:00:00 2001 From: srividya0208 <68350089+srividya0208@users.noreply.github.com> Date: Thu, 26 Jun 2025 14:42:41 +0530 Subject: Correction of firewall syntax in multiple pages (#1651) --- docs/configuration/interfaces/wireguard.rst | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'docs/configuration/interfaces') diff --git a/docs/configuration/interfaces/wireguard.rst b/docs/configuration/interfaces/wireguard.rst index db2ff2c7..b4e4d8db 100644 --- a/docs/configuration/interfaces/wireguard.rst +++ b/docs/configuration/interfaces/wireguard.rst @@ -220,14 +220,15 @@ firewall exception. set firewall ipv4 name OUTSIDE_LOCAL rule 20 destination port 51820 set firewall ipv4 name OUTSIDE_LOCAL rule 20 log enable set firewall ipv4 name OUTSIDE_LOCAL rule 20 protocol udp - set firewall ipv4 name OUTSIDE_LOCAL rule 20 source You should also ensure that the OUTSIDE_LOCAL firewall group is applied to the -WAN interface and a direction (local). +WAN interface and in an input (local) direction. .. code-block:: none - set interfaces ethernet eth0 firewall local name 'OUTSIDE-LOCAL' + set firewall ipv4 input filter rule 10 action jump + set firewall ipv4 input filter rule 10 jump-target 'OUTSIDE_LOCAL' + set firewall ipv4 input filter rule 10 inbound-interface name 'eth0' Assure that your firewall rules allow the traffic, in which case you have a working VPN using WireGuard. -- cgit v1.2.3