From dfea790b36ddab4c6661436c8eed3cea7af5bd3a Mon Sep 17 00:00:00 2001
From: Daniil Baturin <daniil@vyos.io>
Date: Wed, 6 May 2026 14:08:24 +0100
Subject: Revert "Add incremental RST-to-MyST swap mechanism (#1857)" (#1892)

This reverts commit 4b36114e053ee11d0cb264a1e4cfe4692d78f194.
---
 .../protocols/md-traffic-engineering.md            | 54 ----------------------
 1 file changed, 54 deletions(-)
 delete mode 100644 docs/configuration/protocols/md-traffic-engineering.md

(limited to 'docs/configuration/protocols/md-traffic-engineering.md')

diff --git a/docs/configuration/protocols/md-traffic-engineering.md b/docs/configuration/protocols/md-traffic-engineering.md
deleted file mode 100644
index 832023a7..00000000
--- a/docs/configuration/protocols/md-traffic-engineering.md
+++ /dev/null
@@ -1,54 +0,0 @@
-(traffic-engineering)=
-
-# Traffic Engineering
-
-Traffic Engineering (TE) is possibility to send traffic from node to node using
-alternative path.
-
-## Common link parameters
-
-Traffic Engineering parameters are used for both IS-IS and OSPF (not supported yet).
-
-```{cfgcmd} set protocols traffic-engineering admin-group \<admin-group-name\> bit-position \<bit-position-value\>
-
-Create Administrative group and assosiate bit position with it. These groups can be
-used in the following commands.
-
-\<bit-position-value\> can have value 0-31. There cannot be two groups with same bit position.
-```
-
-
-```{cfgcmd} set protocols traffic-engineering interface \<ifname\> admin-group \<admin-group-name\>
-
-Set administrative group for interface \<ifname\>. Multiple values can be provided.
-```
-
-
-```{cfgcmd} set protocols traffic-engineering interface \<ifname\> max-bandwidth \<max-bandwidth-value-mbps\>
-
-Set maximum bandwidth for interface \<ifname\>. Value given in Mbits per second.
-```
-
-
-```{cfgcmd} set protocols traffic-engineering interface \<ifname\> max-reservable-bandwidth \<max-reservable-bandwidth-value-mbps\>
-
-Set maximum reservable bandwidth for interface \<ifname\>. Value given in Mbits per second.
-```
-
-## IS-IS TE Configuration
-
-Traffic Engineering (TE) can be enabled and exported for IS-IS
-using the following commands:
-
-```{cfgcmd} set protocols isis traffic-engineering enable
-
-Enable Traffic Engineering for IS-IS.
-```
-```{cfgcmd} set protocols isis traffic-engineering export
-
-Export Traffic Engineering data to neighbors.
-```
-```{cfgcmd} set protocols isis traffic-engineering address \<ipv4-address\>
-
-Configure IPv4 address for MPLS-TE.
-```
\ No newline at end of file
-- 
cgit v1.2.3