From b4b3fb12e20401d0c95022ff38641e5d0f9bf6d2 Mon Sep 17 00:00:00 2001 From: Cheeze_It Date: Sun, 3 Dec 2023 15:08:55 -0700 Subject: Add ISIS fast reroute documentation Adding basic descriptions of ISIS fast reroute documentation. Sadly it's sparse because FRR didn't really document it very deeply. But we'll get more as time goes on. --- docs/configuration/protocols/isis.rst | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'docs/configuration/protocols') diff --git a/docs/configuration/protocols/isis.rst b/docs/configuration/protocols/isis.rst index 18a7c166..1f779d0a 100644 --- a/docs/configuration/protocols/isis.rst +++ b/docs/configuration/protocols/isis.rst @@ -302,6 +302,34 @@ Timers control the timing of the execution of SPF calculations in response to IGP events. The process described in :rfc:`8405`. +Loop Free Alternate (LFA) +------------------------- + +.. cfgcmd:: set protocols isis fast-reroute lfa remote prefix-list + + + This command enables IP fast re-routing that is part of :rfc:`5286`. + Specifically this is a prefix list which references a prefix in which + will select eligible PQ nodes for remote LFA backups. + +.. cfgcmd:: set protocols isis fast-reroute lfa local load-sharing disable + + + This command disables the load sharing across multiple LFA backups. + +.. cfgcmd:: set protocols isis fast-reroute lfa local tiebreaker + index + + + This command will configure a tie-breaker for multiple local LFA backups. + The lower index numbers will be processed first. + +.. cfgcmd:: set protocols isis fast-reroute lfa local priority-limit + + + This command will limit LFA backup computation up to the specified + prefix priority. + ******** Examples -- cgit v1.2.3 From 4761be6a446afaf158f6f5581329ea1e5382c0f5 Mon Sep 17 00:00:00 2001 From: srividya0208 Date: Mon, 4 Dec 2023 06:24:36 -0500 Subject: "show ipv6 bgp" command is not available so replaced with show bgp ipv6 --- docs/configuration/protocols/bgp.rst | 27 ++++++++++++++------------- docs/configuration/system/ipv6.rst | 28 +--------------------------- 2 files changed, 15 insertions(+), 40 deletions(-) (limited to 'docs/configuration/protocols') diff --git a/docs/configuration/protocols/bgp.rst b/docs/configuration/protocols/bgp.rst index 737e98fa..8fc69111 100644 --- a/docs/configuration/protocols/bgp.rst +++ b/docs/configuration/protocols/bgp.rst @@ -952,7 +952,7 @@ Operational Mode Commands Show ==== -.. opcmd:: show bgp +.. opcmd:: show bgp This command displays all entries in BGP routing table. @@ -964,6 +964,7 @@ Show i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete + RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path *> 198.51.100.0/24 10.0.34.4 0 0 65004 i @@ -971,7 +972,7 @@ Show Displayed 2 routes and 2 total paths -.. opcmd:: show bgp +.. opcmd:: show bgp This command displays information about the particular entry in the BGP routing table. @@ -991,55 +992,55 @@ Show This command displays routes with classless interdomain routing (CIDR). -.. opcmd:: show bgp community +.. opcmd:: show bgp community This command displays routes that belong to specified BGP communities. Valid value is a community number in the range from 1 to 4294967200, or AA:NN (autonomous system-community number/2-byte number), no-export, local-as, or no-advertise. -.. opcmd:: show bgp community-list +.. opcmd:: show bgp community-list This command displays routes that are permitted by the BGP community list. -.. opcmd:: show ip bgp dampened-paths +.. opcmd:: show bgp dampening dampened-paths This command displays BGP dampened routes. -.. opcmd:: show ip bgp flap-statistics +.. opcmd:: show bgp dampening flap-statistics This command displays information about flapping BGP routes. -.. opcmd:: show ip bgp filter-list +.. opcmd:: show bgp filter-list This command displays BGP routes allowed by the specified AS Path access list. -.. opcmd:: show bgp neighbors
advertised-routes +.. opcmd:: show bgp neighbors
advertised-routes This command displays BGP routes advertised to a neighbor. -.. opcmd:: show bgp neighbors
received-routes +.. opcmd:: show bgp neighbors
received-routes This command displays BGP routes originating from the specified BGP neighbor before inbound policy is applied. To use this command inbound soft reconfiguration must be enabled. -.. opcmd:: show bgp neighbors
routes +.. opcmd:: show bgp neighbors
routes This command displays BGP received-routes that are accepted after filtering. -.. opcmd:: show bgp neighbors
dampened-routes +.. opcmd:: show bgp neighbors
dampened-routes This command displays dampened routes received from BGP neighbor. -.. opcmd:: show bgp regexp +.. opcmd:: show bgp regexp This command displays information about BGP routes whose AS path matches the specified regular expression. -.. opcmd:: show bgp summary +.. opcmd:: show bgp summary This command displays the status of all BGP connections. diff --git a/docs/configuration/system/ipv6.rst b/docs/configuration/system/ipv6.rst index 076efdae..c7308f9d 100644 --- a/docs/configuration/system/ipv6.rst +++ b/docs/configuration/system/ipv6.rst @@ -81,6 +81,7 @@ Show commands static Show IPv6 static routes summary Show IPv6 routes summary table Show IP routes in policy table + tag Show only routes with tag vrf Show IPv6 routes in VRF @@ -112,33 +113,6 @@ Show commands Execute the current command Show specified IPv6 access-list -.. opcmd:: show ipv6 bgp - - Use this command to show IPv6 Border Gateway Protocol information. - - - In addition, you can specify many other parameters to get BGP - information: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 bgp - Possible completions: - Execute the current command - Show BGP information for given address or prefix - - community Show routes matching the communities - community-list - Show routes matching the community-list - filter-list Show routes conforming to the filter-list - large-community - Show routes matching the large-community-list - large-community-list - neighbors Show detailed information on TCP and BGP neighbor connections - prefix-list Show routes matching the prefix-list - regexp Show routes matching the AS path regular expression - route-map Show BGP routes matching the specified route map - summary Show summary of BGP neighbor status .. opcmd:: show ipv6 ospfv3 -- cgit v1.2.3